Circuit schematic diagram of the Cyclone® II FPGA EP2C8Q208C8 minimum core board.
The analyzer host computer directly uses Wireshark. The hardware is implemented using Cypress CY7C68013A MCU + Lattice LCMXO2 FPGA + Microchip USB3343 USB PHY
2 Layers PCB 52 x 96.3 mm FR-4, 1.6 mm, 1, HASL with lead, Blue Solder Mask, White silkscreen; A device for women safety, equipped with GSM and GPS modules for location tracking.
Breakout board for Lattice HX4K FPGAs with 10 PMOD connectors and onboard microcontroller for programming and communication via USB.
Powerful 1km 6-10 channel remote control, suitable for DIY projects such as drones and cars.
4 Layers PCB 60 x 171 mm FR-4, 1.6 mm, 1, HASL lead free, Green Solder Mask, White silkscreen;10.5GHz, 8 element, patch antenna. Make your own phased array for communications or radar. Full instructions at github .com/jonkraft
There are three boards in total, USB, FPGA and Sensor board. The FPGA board features a Lattice Crosslink NX LIFCL-40 and the required power regulator, and the USB board features a CYUSB3014 USB 3.0 SuperSpeed controller.
Through this open source tool, everyone can better understand how program firmware is "exploded", thereby improving product security. Crack AES, crack RSA, crack DES and so on.
Referring to the structure of the can chip saj1000 controller, the can controller is written