NXP FRDM-KW019032 is a development board for the MKW01Z128CHN platform and a member of the Kinetis ® W series MCUs in the SubGHz ISM band.
PMP4497 is a GaN-based reference design solution suitable for Vcore applications such as FPGA and ASIC. With high integration and low switching losses, the GaN module LMG5200 enables high-efficiency single-stage 48V to 1.0V solutions, replacing traditional two-stage solutions. This reference design demonstrates the GaN performance and system advantages of this solution compared to two-level solutions. Low cost ER18 flat PCB transformer embedded on board. This reference design is compact in size (45mm*26mm*11mm). Further size reduction can be achieved by optimizing frequency and components.
MAXREFDES1155 is a configurable two-channel resistance temperature detector (RTD)/thermocouple (TC) measurement system.
This application note presents a reference design for a rear combination lamp (RCL) LED driver in a 3-series, 3-parallel (3S3P) configuration. Using the MAX16823 linear driver and external BJTs, this design provides 200mA per string as well as enhanced heat dissipation. Also included is PWM dimming circuitry for tail-light inputs and full brightness for brake-light inputs. Double-battery and load-dump conditions have been taken into consideration.
TIDM-ULTRASONIC-FLOW-TDC is a reference design for an ultrasonic flow meter (water, gas or heat meter) with LCD, using a time-to-digital converter and an ultra-low power MCU. The solution includes optimized leak detection, low power consumption and small form factor, which are important requirements for water, heat and gas meter applications. The design also includes a high-efficiency DC-DC converter for system power supply.
This "RF Layout Reference Design" demonstrates excellent decoupling and layout techniques for low power RF devices in the 868 MHz and 915 MHz bands.
There are currently more than 30 industry standards for Industrial Ethernet in the field of industrial automation. Some mature real-time Ethernet protocols such as EtherCAT, EtherNet/IP, PROFINET, Sercos III, and PowerLink require specialized MAC hardware support for FPGAs or ASICs. The Programmable Real-Time Unit within the Industrial Communication Subsystem (PRU-ICSS) exists as a hardware module of the Sitara processor family and will replace FPGAs or ASICs with a single chip solution. Firmware in PRU-ICSS can be used to detect the type of Industrial Ethernet protocol and load the corresponding industrial application into the Sitara processor during runtime. This TI Design introduces PRU-ICSS's multi-protocol Industrial Ethernet protocol detection firmware.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) through power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power.
The Carmel (MAXREFDES18#) subsystem reference design provides a high-accuracy analog current/voltage output in a compact, galvanically isolated form factor. This design uniquely fits programmable logic controllers (PLC), distributed control systems (DCS), and other industrial applications . Hardware and firmware design files and lab measurements are provided for rapid prototyping and development. The board is also available for purchase.
The TIDA-01570 reference design is a complete solution for 76 to 81GHz radar sensor modules. The onboard power supply converts the vehicle battery input to the power rails required by the radar AFE, processor and CAN-FD transceiver. After processing, the target data is made available via the included CAN-FD physical layer.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) via power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power. The MAXREFDES1149 reference design is a 36V~57V input to 12V/1A output flyback PoE PD power module to be used in Ethernet equipment that needs the 12V power supply to be isolated from the primary Ethernet power.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This design is a splitter for 4x PMOD connectors. All 32 I/O signals from the SYZYGY connector are brought out. 8 on each PMOD.
The MAXREFDES9000 is a reference design showcasing the DS28E18 that demonstrates how to both operate and power remote I2C and serial peripheral interface (SPI) sensors using only two wires
The MAXREFDES1154 is a configurable 4-channel RTD/TC measurement system.
This reference design is a low standby and transport mode current consumption, high SOC metering accuracy, 13S, 48V Li-ion battery pack design. It monitors each cell voltage, battery pack current and temperature with high precision and protects lithium-ion battery packs from overvoltage, undervoltage, overheating and overcurrent. SOC metrology based on the bq34z100-g1 utilizes an impedance tracking algorithm to achieve up to 2% accuracy at room temperature. Utilizing a carefully designed auxiliary power strategy and the efficient low quiescent current DC/DC converter LM5164, this design achieves 50µA standby power and 5µA transport mode power, thereby saving more energy and extending transport and idle times. In addition, the design supports working firmware, which helps reduce product development time.
The MAXREFDES1180 is centered around the MAX17501 ultra small, high-efficiency, high-voltage, synchronous stepdown DC-DC converter with integrated MOSFETs. This design provides a -12V output and up to 150mA of load current with an input voltage range of 4.5V to 5.5V. Unlike a traditional design, this reference design is configured to work in an inverting buck-boost topology to produce negative output voltage from positive input voltage.