This reference design demonstrates how to use the IWR6843, a single-chip millimeter wave radar sensor from TI with an integrated DSP, to implement indoor and outdoor people counting applications while enabling sub-1GHz wireless communications. This reference design uses the MMWAVEICBOOST and IWR6843ISK evaluation modules (EVMs) and the LAUNCHXL-CC1352R1 wireless MCU LaunchPadTM. The solution is capable of locating people at distances up to 6 meters (close configuration) and 14 meters (long range configuration).
New Analog/Analog Isolator Using Isolated Σ-Δ Modulator, Isolated DC/DC Converter and Active Filter
This PMP10600.1 reference design provides all the power rails required to power the Xilinx® Zynq® 7000 Series (XC7Z015) FPGA. This design uses multiple LMZ3 series modules, multiple LDOs, and a DDR termination regulator. It also has an LM3880 for power-up and power-down sequencing. This design uses a 12V input voltage.
This solution is designed to create a size-optimized integrated power design for ADAS applications using the TDA3x SoC (no automotive battery input required). By targeting only applications that require lower processing performance, we can select smaller devices and components than systems with higher performance processors.
Power-over-Ethernet (PoE) technology enables power-sourcing equipment (PSE, a switch/router or midspan system) to deliver up to 15W of power to IEEE® 802.3af-compliant powered devices like IP phones and wireless LAN access points. This application note describes how to design a single-port PSE system to meet the IEEE 802.3af signature, classification, and power-management requirements. The single-port PSE in this example is designed using the MAX5922A IC.
The design converts an 8V-42V DC input into a 5.1V output and is protected by the TPS2546-Q1 programmable current protection switch. Its handshake protocol enables fast charging of smartphones/tablets/handheld devices. By detecting the load current and adjusting the DC/DC output voltage, this design can implement linear USB cable differential compensation function to keep the USB port voltage within a limited range. This design is suitable for devices such as vehicle-mounted hosts and remote USB hubs.
Active Balance chipset used in large lithium-ion batteries provides monitoring, balancing and communication functions. With precise and reliable active balancing, Active Balance BMS enables bidirectional power transfer within each cell. Each EM1401EVM can manage 6 to 14 cells (up to 60V) in Li-ion battery applications. EM1401EVM modules can be stacked up to 1300V. The system provides fast cell balancing, diagnostic functions and modules for controller communication. An independent protection circuit is also provided.
The SimpleLink™ Multi-Standard CC2650 Remote Control Reference Design is an all-in-one solution for the development of voice-based Bluetooth® Low Energy, ZigBee® RF4CE™ or multi-standard remote control. This reference design shows the recommended decoupling and RF layout for optimal RF performance. This design uses discrete components for the balun and filter, as well as an inverted F-shaped PCB antenna to provide good performance at low cost.
This processor-based reference design helps speed time to market and helps customers design cost-effective human-machine interface (HMI) solutions for electric vehicle (EV) charging infrastructure or EV power supply equipment (EVSE). This reference design demonstrates the two-dimensional (2D) Qt graphical user interface (GUI) common to EVSE HMI, as well as TI processor capabilities for software-rendered graphics. The AM335x processors provide scalability and a variety of processing speeds and compatible software to meet the needs of low-end to high-end applications. They also provide ample connectivity, including key peripherals required for EVSE HMI such as universal asynchronous receiver/transmitter (UART) and CAN).
Kinetic Digits is a mechanical flipping digital display, consisting of 448 7-segment digital tubes, simulating the effect of water flow. For various effects, it can be produced with the help of the provided host computer.
The KITPF8100FRDMEVM and KITPF8200FRDMEVM are customer evaluation boards using the PF8100 and PF8200 power management ICs.
The MAX17509 integrates two 3A internal switch step-down regulators with programmable features. The device can be configured as two single-phase, independent, 3A power supplies or as one dual-phase, single-output 6A power supply. It operates from a 4.5V to 16V input and generates independently adjustable output voltage in the ranges of 0.904V to 3.782V and 4.756V to 5.048V, with ±2% system accuracy. This device provides maximum flexibility to the end user by allowing one to choose multiple programmable options by connecting resistors to the configuration pins.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
