i.MX RT1064 Evaluation Kit

i.MX RT1064 EVK is a 4-layer through-hole USB powered PCB. The core of the board is the i.MX RT1064 crossover MCU, which uses NXP’s advanced Arm® Cortex®-M7 core implementation. The core runs at speeds up to 600 MHz, providing high CPU performance and excellent real-time response.

Schematic PCB

i.MX RT1060 Evaluation Kit

i.MX RT1060 EVK is a 4-layer through-hole USB powered PCB. At its core is the i.MX RT1060 crossover MCU, implemented using NXP's advanced Arm® Cortex®-M7 core. This core runs at speeds up to 600 MHz to provide high CPU performance and excellent real-time response. Support for FreeRTOS™ is provided in the MCUXpresso SDK. Zephyr™ OS supports the i.MX RT1060 evaluation kit for developing IoT with a free, open source embedded operating system. 

Schematic PCB

Wireless kitchen timer

The principle of the work is mainly to use a three-axis acceleration sensor to collect angle information and convert it into the required timing time. At the same time, it is used to collect motion information as a timer control signal.

Schematic PCB

i.MX 8M Nano Applications Processor Evaluation Kit

The i.MX 8M Nano EVK provides a platform for rapid evaluation of i.MX 8M Nano and i.MX 8M Nano Lite applications processors.

Schematic PCB

TWR-MCF51AG: ColdFire MCF51AG Tower System Module

TWR-MCF51AG-KIT is a development tool based on the MCF51AG128 microcontroller. The kit is part of the NXP Tower System, a modular, reconfigurable development platform that enables designers to accelerate time to market by packaging evaluation boards, tools and runtime software.

Schematic PCB

Low standby loss front end with inrush current limiting and isolated AC switch control

Low standby loss front end with inrush current limiting and isolated AC switch control

Schematic PCB

Integrated Turnkey Reference Design for Rotary Refrigerator Compressor Drive

Schematic PCB

FOC three-phase high voltage inverter power board based on STGIPN3H60A (SLLIMM™-nano)

Three-phase high voltage inverter power board for FOC and scalar motor control based on STGIPN3H60A (SLLIMM™-nano))

Schematic PCB

Cold thermostat kit based on AC switch and STM8S

Cold thermostat kit based on AC switch and STM8S

Schematic PCB

TWR-KV31F120M: Kinetis ^® KV3x Series Towersystem module

TWR-KV31F120M is a development tool for KV3x series products in Kinetis ^{® V series, using ARM ®} Cortex ^® -M4 processor.

Schematic PCB

DSPAUDIOEVM: DSPAUDIOEVM evaluation module

ZigBee Smart Socket Reference Design Using EFR32MG12 Si7021 and Si1141

ZigBee Smart Socket Reference Design Using EFR32MG12 Si7021 and Si1141

Schematic PCB

Fully automatic washing machine design

This article designs a fully automatic washing machine control system with the AT89C51 microcontroller as the core. This system realizes the control of the entire washing process of the washing machine, including the four stages of user program input, washing, dehydration and end alarm. Laundry control system based on AT89C51 microcontroller, the control panel consists of buttons, indicator lights and LCD display. The buttons select the working mode of the washing machine and the start and pause functions. The indicator lights work with the buttons, and the LCD display shows the working mode of the washing machine. The overall circuit module of the washing machine includes four independent keyboards, indicator lights, motor control and LCD display.

Schematic PCB

TWR-S08DC-PT60: 5V, 8-bit MC9S08P tower system daughter card

Schematic PCB

TWR-56F8257: DSC MC56F8257 Motor Control Tower System Module

DEMO9S08SE8: SE8 Demonstration Board

Schematic PCB

Using single-chip microcomputer AT89C51 to transform ordinary double-tub washing machine

Ordinary double-tub washing machines have a large number of users because of their low price and durability. However, as people's pace of life accelerates, there are many inconveniences when using this kind of washing machine to wash clothes: you need to add water before washing clothes, which takes about 2 to 3 minutes. Many friends can't stand the "torture" of time and go about other things. They often forget to turn off the water, causing a lot of waste. When washing clothes, turning the timer can usually wash for up to 15 minutes. Most users don't do this process. He will stay by the washing machine. When the timer ends, he cannot time the time or rinse again in time. Sometimes he even forgets how long he has been washing, which greatly prolongs the washing time. He cannot leave people while rinsing. Someone must be involved in the whole process. Very inconvenient. This article introduces a method of using the AT89C51 microcontroller to transform an ordinary double-tub washing machine. After the transformation, the entire process of water inlet, washing, rinsing, and drainage can be completed automatically. Multiple washing and rinsing methods can be selected, and single washing, single rinsing, and Manual function, very convenient.

Schematic PCB

Home appliances

Smart home appliances integrate LCD human-machine interface and audio feedback warning functions. Take washing machines as an example. Before customers call the manufacturer, we can provide technical answers on how the washing machine operates to reduce the number of customer service calls. Washing machine/dryer manufacturers can add audio quality sound feedback and warnings to laundry process stages, water selection error reports, etc.

Schematic PCB

[Open Source Project] Voice Recognition Controlled AI Night Light Based on ESP32

Schematic PCB

Heating kitchen appliances

This solution can be used for multi-functional combination: oven, steaming, steaming, roasting and cooking, etc. It has automatic settings, detection and control of timing, temperature adjustment, power adjustment, etc., and has an LCD screen display. It adopts the 1T 8051 core microcontroller with industrial-grade operating temperature (-40°C ~ 105°C) as the main control and has a built-in segment LCD driver.