HL72023-2700-CH datasheet, PDF

HL72023-2700-CH: DescriptionBoard Connector; CategoryThe connector The connector; File Size264KB，2 Pages; ManufacturerFOXCONN; Websitehttp://www.fit-foxconn.com/

Download Datasheet Parametric View All

HL72023-2700-CH Overview

Board Connector

SPECIFICATIONS

1.ELECTRICAL CHARACTERISTICS:

1-1. CONTACT CURRENT RATING : 2 AMPERES PER CONTACT.

1-2. LOW LEVEL CONTACT RESISTANCE : 30 MILLIOHMS MAX.

INITIALLY;

40 MILLIOHMS MAX. AFTER LIFE TESTING.

1-3. INSULATION RESISTANCE: 1000 MEGOHMS MIN. .

1-4. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC FOR 1 MINUTE.

Header Connector

HL72 Series

T/ H,PIN SOCKET

2.00mm Pitch

2.MECHANICAL CHARACTERISTICS:

2-1. CONTACT RETENTION FORCE: 1.36 Kgf MIN. PER CONTACT.

2-2. INSERTION FORCE: 0.40Kgf MAX. PER. PIN WITHDRAWL FORCE:

0.020Kgf MIN. PER. PIN

2-3. DURABILITY: 50 CYCLES

ENVIRONMENTAL DATA:

3-1. SOLDERABILITY: PASSED EIA-364-52.

3-2. OPERATION TEMPERATURE: -55℃ TO +105℃.

3-3. HARMFUL MATERIAL CONTROL PLEASE FOLLOW FOXCONN'S

DOC. "EPI12".

DRAWING

All specification & dimensions are subject to change, please call your nearest Foxconn sales representative for update information.

【KW41Z】Walking instrument 2: The Bluetooth part of KW41Z is finally completed. Actually, it can’t be said to be completed. It is just a transplantation of an existing example. Upload regularly after Bluetooth connection [code]ext...; dvd1478 NXP MCU

Ask a question about the IO of C8051F microcontroller: As the title says, I read the PDF document of C8051F and found that the power supply voltage of C8051F can be 3.3V-5V, but the IO voltage of C8051F is not mentioned in the PDF. So, what is the IO volt...; oldcat 51mcu

ATMEGA128A's crystal oscillator does not oscillate: For the reset circuit already added to the schematic diagram, connect the reset circuit according to the DMAVR schematic diagram...; mingmingyama Microchip MCU

Measuring AC voltage and frequency: Measuring AC voltage and frequency1. Measure voltage1. Signal transformation method: (1) Measure the amplitude point by point and then perform integration operation; this requires a high-speed AD conv...; xu__changhua 51mcu

28377D SPI communication problem!: I encountered a very strange problem. I used SPI to read and store external EERPOM. When the speed was set below 600k, some of the stored data was lost. When it was over 600k, the storage was normal. ...; tanf Microcontroller MCU

There is a pit: Importing the demo using 10.0.2 IDE will result in compilation failure, but using 10.0.0 will work fine....; lemon0809 NXP MCU

Popular Components