Introduction: This project is a super device based on esp07, with a size of only 1! It comes with a usb-a interface and a ch340e serial port chip. Plug it into the computer usb port, install the driver and you can use it directly. The board has 8 gpio, one 5v And a 3.3 power interface, convenient for development and use.
Introduction: This project is a super USB based on atmega328pb-au! It has high parts density and comes with its own serial port chip. And the special thing is to use pcb as usb
Introduction: This project is a handheld tachometer based on attiny and infrared tube, using attiny85 microcontroller, SMD infrared tube solution, using lm321 op amp, dual series cr2032 battery power supply and 0.91-inch OLED screen
Introduction: This project uses the ACS712ELCTR-20A-T Hall effect current sensor chip, which has an accuracy of ±1.5% and supports both DC and AC power.
Introduction: Two nickel-metal hydride battery chargers realize automatic charging and turning lights function, simple and practical
Introduction: Dual MIC circuit + 4th-order 5KHz low-pass filtering to eliminate environmental background noise. The MIC circuit uses LMC660 equipped with AD623; the 4th-order 5KHz low-pass filter is composed of LMC660;
Introduction: Use a 12V single power supply to get ±12V for the 5532 headphone amplifier.
Introduction: This project is an arbitrary waveform generator circuit
Introduction: 20-segment music rhythm spectrum light
Introduction: A single power supply ADC based on the LMC660 Rail-to-Rail op amp, and an R-2R weighted resistor network, using direct plug-in components.
Introduction: Expansion power board for Class-D Amplifier
Introduction: Class D power amplifier board suitable for TPA3118, TPA3116, TPA3130
Introduction: Voice-activated melody light fully plug-in device CR2032 battery powered
Introduction: TP4056 LiIon Charger Protector Booster SMD