This is a very simple open source scanning laser rangefinder. It uses triangulation. Its components cost less than $35 (excluding shipping). This lidar is very useful in robotics - for SLAM and navigation tasks.
Ultra-simple Hall sensor speed measurement, the value is displayed on the 16x02 LCD display
The three-phase power meter reference design is used to measure and record active and reactive energy in directly connected three-phase networks. It is pre-certified to the European EN50470-1, EN50470-3, Class B and Class C, and IEC 62053-21 and IEC 62052-11 international standards for active energy class 2 and class 1 electronic meters.
The Sub-μA Current Sensor is a Kinetis K22F based current measurement board running on FreeRTOS and can be used with the Freedom Development Ecosystem or any other Arduino-like development board.
This reference design allows for non-intrusive connection between any MCU and a 3.3V shield and measurement of a wide range of low currents (~60 nA – 5 mA). Multiple communication methods are available, including integration with Freedom Sensor Toolbox (CE).
2 Layers PCB 8.941 x 60.782 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen;
Based on ESP32, HC-SR04 ultrasonic sensor