Use the Android cable to connect the voice chip and connect it to the computer. At this time, there is a removable disk on the computer, and then put the sound file into the removable disk... Materials used: Voice playback module Yabo 51 microcontroller (refer to this microcontroller The digital tube and the 8 free IO ports can be used) 3 10k resistors... Put the sound file into the voice chip and connect the data line and power line to the microcontroller. Use the keil tool to generate the hex file from the c program. And write it into the microcontroller...
It is composed of labview front panel and back panel controls.
The manipulator is the main tool for exchanging tools in the automatic tool changer. It is responsible for sending the tools from the tool magazine to the spindle, and then returning the used tools from the spindle to the tool magazine. The design idea is to use the movement of the manipulator to change the tool of the machining center. The rotation of the manipulator is realized by a rotary pneumatic cylinder or a rotary pneumatic cylinder, and its power is realized by the drive system. The automatic tool changer of a machining center is usually composed of a tool magazine and a manipulator. It is a symbol of the machining center and a key link to the success or failure of the machining center. Therefore, all machining center manufacturers are working hard to develop automatic tool changers with fast action and high reliability in order to achieve good results in the fierce competition. Automatic tool changers are the core content of machining centers, and each manufacturer is keeping it secret. Very little relevant information is disclosed, especially the robot part. The knife extraction and knife insertion actions of the manipulator are mostly completed by the pneumatic cylinder or the action of the pneumatic cylinder. The entire manipulator is composed of a mechanical arm telescopic mechanism, a mechanical claw opening and closing mechanism, a rotary mechanism and a linear motion mechanism for loading and unloading tools.
This project applies the bidirectional Z-source inverter to the motor drive system of pure electric vehicles. Using TMS320F2808 DSP as the control core, the SVPWM control technology based on the Z-source inverter is implemented.
A complete collection of complex robotic arm drawings, including Fanuc 100iB
The most complete six-axis robot design drawings
Protues simulation example (8051)-stepper motor control.rar
Protues simulation example (8051) - playing music
Protues simulation example (8051)-SPI demonstration file two 595 docking
Open the laptop's built-in camera through matlab and detect faces.
Multifunctional mini computer (SD, wifi, OLED) design source code and related test programs
Storage oscilloscope, fully functional and verified, for graduation project
The collection of papers from previous electronic design competitions includes design ideas, circuit diagrams and corresponding program flow charts for function signal generators, oscilloscopes, automatically controlled balancing cars, radios, etc.
The system developed in this article is based on the existing triggered voice time reporting system, adding a speech recognition circuit, so that the developed system can have the function of dialogue response time reporting, and realize the truly automated and intelligent voice time reporting.
This application note discusses how to best bias the AC signal to within the DC supply range and how to use digital potentiometers in circuits designed for mechanical potentiometers. This understanding is crucial to effectively using the DS1802 in a pushbutton-controlled audio preamplifier circuit.
This application note describes the use of a current-sense amplifier along with an optocoupler to extend the operating voltage range up to 1,000 volts for high-voltage applications. The circuit relies on the optocoupler's isolation barrier to separate the high-side and grounded side of the 1,000V system. Op amps are used to eliminate photodiode non-linearity and drift and provide an accurate output voltage proportional to the load on the 1kV supply.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
