This application note describes a two-phase, synchronous, step-down converter that is fully compliant with the AMD® K8 Low-Power Mobile Specification. It includes details of the circuit operation, schematic, bill of materials, and a 1.2 volt, 27.3 Amp reference design with test data.
In most video applications, the video signal generated from the DAC requires a reconstruction filter to smooth out the signal and attenuate the sampling aliases. The MAX4090 is a direct, DC-coupled output driver, which can be used after the reconstruction filter to drive the video signal. The driving load from the video DAC can be varied from 75Ω to 300Ω. A low input impedance (< 100Ω) is required by the MAX4090 in normal operation, special care must be taken when a reconstruction filter is used in front of the MAX4090.
This reference design for a 6A step-down LED driver is based on the MAX16821 device. This circuit drives a single LED. This design includes the circuit specifications, circuit schematic, and circuit description and performance.
Design autonomous vehicles with our sensor fusion development platform
The SBC-S32V234 is cost-competitive and small in size for secure, compute-intensive front-view, surround-view and sensor fusion applications
The LPC845 Capacitive Touch Development Kit (OM40004) makes it easy to evaluate the capacitive touch functionality of LPC84x family devices.
The LPC54018 IoT module is a high-performance, self-sufficient microcontroller module that supports IEEE802.11 and is suitable for products based on the LPC540xx MCU series.
NXPProvides SABER circuit board as a development platform for i.MX7Dual application processor, using ARM® Cortex®-A7 and Cortex®-M4 dual-core.
LPC54114 Audio and Speech Recognition Kit
The MCIMX6UL-EVK is designed to showcase the capabilities of i.MX 6 UltraLite and help ease your software development with support for the Linux® operating system.
Freedom KL26Z is an ultra-low-cost development platform for Kinetis L-series KL16 and KL26 MCUs based on Arm ® Cortex ® -M0+ processors.
FRDM-KL27Z is an ultra-low-cost development platform for Kinetis L-series KL17 and KL27 MCUs based on Arm ® Cortex ® -M0+ processors.
FRDM-KL46Z is an ultra-low-cost development platform using Kinetis L series KL4x MCU based on Arm Cortex-M0+ processor.
The FRDM-MC-LVPMSM low-voltage, 3-phase permanent magnet synchronous motor (PMSM) Freedom development board platform adds motor control functions such as rotation or linear motion to your design applications.
The FRDM-MC-LVMTR is a low voltage 3-phase motor designed for use in FRDM development systems.
Keil LPC1769 Evaluation Board
FRDM-KL28Z is a development board for Kinetis KL28 72Mhz 32-bit Arm ® Cortex ® -M0+.
NXPProvides highly flexible, market-ready development tools in an evaluation kit based on the i.MX 6SoloLite applications processor.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
