TECH 2410UP TECH 2410 bootloader programming

lovelsc

TECH 2410UP TECH 2410 bootloader programming [Copy link]

I'm learning WINCE 5.0 recently. When I use the BOOTLOADER file in the CD-ROM to burn the boot file, I add the hardware and enter the command line, sjf2410/f:2410loader.bin, and then select K9S1208 PROG. Then it shows K9S1208 NAND FLASH JTAG PROGRAMMER. The computer shows that the process occupies 100% of the CPU. It has been like this since then. It will not prompt that FLASH is detected and then start burning. Which expert can help me tell me what the reason is? Thank you.

getwap

It has been powered on. The FLASH in the test box manual is K9S1208. There is a giveio port. I also installed it according to the steps in the manual. It prompts that the hardware installation is complete. There is no problem in the device manager. May I ask how to check whether the CPU is detected? I originally wanted to burn the customized image in to see, but I got stuck here.

hzkkcqy

Does any senior know please help me, I'm waiting online...