About CETK SDK

hsygzdc

About CETK SDK [Copy link]

I want to test CETK now. I checked Windows Embedded CE Test Kit, then SYSGEN, exported an SDK, and installed the SDK. But when CETK selects SDK, the SDK I installed is not there. Do I need to select anything else? ?

100mdppp

WinCE6.0's CETK seems to only recognize WinCE5.0's SDK, at least on my machine.

ludongyan

Help you

linjh052

You can try to connect the board with the displayed SDK, it should be able to connect to your current board, and then you can test it. But please note that the SDK you can display must be of the same architecture as your board.

liming66

Quote from the reply of abo77281 on the 3rd floor: You can try to connect the board with the displayed SDK. It should be able to connect to your current board, and then you can test it. But please note that the SDK you can display must be of the same architecture as your board.

I have a 5.0 that can display, but it can't connect when connecting

wangke3721

Quote the reply of luixing67 on the 4th floor: Quote the reply of abo77281 on the 3rd floor: You can try to connect the board with the displayed SDK, it should be able to connect to your current board, and then you can test it. But please note that the SDK you can display must be of the same architecture as your board. I have a 5.0 that can display, but it can't connect when connected

Others said this problem is a PC problem, I don't know, I tried several methods mentioned on the Internet, and finally connected it with the 5.0 SDK. But my colleague's not only did not adjust anything, but it could be used after installing the SDK. Weird, haha.

arcsink

I'll give it a thumbs up,,,,,