a high end miniature speaker specifically designed
for portable devices, music phones and
smartphones where high quality sound is
required.
The use of a high performance magnet system
leads to high sensitivity and coupled with a power
handling capacity of 700mW. It enables extremely
high sound pressure for the loudest 9x16x3mm
speaker currently available on the market.
All materials used on the top surface of the
speaker are tested to be water resistant.
100% leak measurement guarantees IPx8 wa-
terproof compliance.
In addition to waterproof compliance this com-
ponent provides the same performance as the
standard Wildcat speaker device (available under
part number 2403 263 00165).
XXXXXXX
Features:
Best-in-class 75dB (1W, 1m) sensitivity
Industry-standard dimensions:
Maximum power handling capacity: 700mW
9x16x3.0mm
Low THD between 4 and 8kHz due to
Optimized for use in mobile handsets
lightweight membrane technology
Best-in-class 75dB/W/m sensitivity
Designed for N’Bass
TM
- ultimate sound
Maximum power handling capacity:
experience combined with Knowles N’Bass
TM
1000mW
technology
Extremely robust spring connector
Industry-standard dimensions: 9x16x3.0mm
Manufactured to the highest
100% in-line measurement of all specified
standards
acoustical and electrical parameters
100% in-line measurement of all
Optimized for use in mobile handsets
This document contains information which is confidential and/or proprietary to Knowles Electronics, LLC or its affiliates. Do not distribute or use the
information contained herein without permission from an authorized representative of Knowles
Related Documents ................................................................................................................................... 20
5.
6.
Change History .................................................................................................................................. 21
It has been a while since I started using 430, but I have only just gotten started. I would like to take this opportunity to share the process.
I have learned 51 before, and later I learned about 430 ...
[size=14px]When looking at the schematic diagram of TI's official BLDC development board, I have some questions about the op amp method multiples. How is it calculated? I calculated it to be 25. Can s...
Just this morning I saw that my idea has been approved, so I went to look at the SENSORTAG wireless sensor. But when I downloaded an Android APP, I saw that the document only supports Android 4.3 and ...
I need a differential 8-to-1 switch. Currently, only CD4052 has a differential 4-to-1 switch. I can use two output terminals in parallel and then control the En terminal to select the chip. I have a C...
I checked it carefully... (The author has a serious mental illness and always identifies the cause of the problem and determines the responsibility for the accident as soon as a problem occurs...) The...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
1 Introduction
There have been many studies on the detection and protection of power grid short circuit and line fault. The short circuit, overload and overvoltage protectors on the market have ...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
Among the many members of the single-chip microcomputer family, the MCS-51 series of single-chip microcomputers has occupied the main market of industrial measurement and control and automation eng...[Details]
From the previous section, we have learned that the timer/counter in the microcontroller can have multiple uses, so how can I make them work for the purpose I need? This requires setting the timer/...[Details]
Single-chip microcomputers are widely used because of their small size, powerful functions and low price. This article introduces the method of designing a micro electronic piano using the AT89C51 sin...[Details]
Investment in
the
medical device
industry has been on the rise in recent years. In the past two years, venture capital for medical devices has almost doubled, reaching $4 billion in 2007. Fr...[Details]
Recently, news came from the certification department that the photovoltaic grid-connected inverter of Samil New Energy Co., Ltd. (hereinafter referred to as "Samil New Energy") has once again obta...[Details]
LED technology has made rapid progress, and improvements in chip design and materials have promoted the development of brighter and more durable light sources, and the scope of light source applica...[Details]
1 Introduction
Ultrasound refers to elastic vibration with a frequency higher than the audible frequency limit (i.e., in the frequency band above 20 kHz). The propagation process of this vib...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
