low cost, surface mount plastic packages for use as
switches and attenuators. These diodes are offered
with 100% matte Sn plating. These PIN diodes
feature a variety of I-region lengths resulting in lower
resistance, and lower
capacitance devices for
various microwave control circuit applications.
The MA4P7436, and MADP-007436 series offer the
lowest series resistance for best performance as low
loss series switches and high isolation shunt
switches.
The MA4P7433, and MADP-007433 series have the
lowest capacitance and offers the highest isolation in
series and series-shunt switches through 3 GHz.
The MA4P7447, MADP-007155 series, MA4P7455,
MADP-007455 series and the MADP-007448 series
are general purpose PIN diodes useful as either
switches or attenuators.
The MA4P7437, MADP-007437 series and
MA4P7438, MADP-007438 series device have
thicker intrinsic regions to provide lower distortion in
attenuator circuits.
The MADP-007167 series devices have the thickest
I-Region, offering the lowest distortion and highest
IP3 for current controlled attenuator circuits. These
devices are ideal for AGC functions for infrastructure
and CATV applications.
These parts are available as single diodes, series
tees (ST or ), series tee reverse (STR), common
cathode pairs (CK), common anode pairs (CA),
MACOM’s PIN diodes are available in the SOT-23
(case style 287), the SOT-323/SC-70(3L) (case style
1146), the SOD-323 (case style 1141), and the
SC-79 (case style 1279) packages. These packages
are supplied on tape and reel for automatic pick and
place assembly. The tape and reel suffix designation
is a “T” at the end of the part number.
Package Outlines
SOT-23
SOT-323
SOD-323
SC-79
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V24
Electrical Specifications @ +25C
Part #
MA4P7436
MADP-007436 Series
MA4P7433
MADP-007433 Series
MA4P7447
MADP-007155 Series
MADP-007448 Series
MA4P7455
MADP-007455 Series
MA4P7437
MADP-007437 Series
MA4P7438
MADP-007438 Series
MADP-007167
1.
2.
3.
4.
Reverse
Voltage
1
(V)
75
75
100
100
100
200
200
200
Total Capacitance
2
RS @ 10 mA
3
Maximum
Maximum
(pF)
(Ohms)
1.00 @ 20 V
0.35 @ 20 V
1.20 @ 20 V
0.25 @ 50 V
0.35 @ 50 V
0.35 @ 50 V
0.35 @ 50 V
0.30 @ 50 V
0.5
1.5
0.6
2.0
3.0
6.0
10.0
16.0
Nominal Characteristics
Carrier
Lifetime
4
(ms)
0.2
0.2
1.0
0.4
1.0
2.0
3.0
3.0
I-Region
Thickness
(mils)
0.4
0.4
0.8
0.6
2.0
4.0
5.0
7.0
The reverse current will not exceed 10
A
at the reverse voltage rating.
Total capacitance is measured at 1 MHz at the indicated voltage.
Series resistance is measured at the specified current and a frequency of 100 MHz.
Nominal minority carrier lifetime is measured at I
F
= 10 mA, I
R
= 6 mA, 90% recovery.
Absolute Maximum Ratings @ +25°C
5
(Unless Otherwise Noted)
Parameter
Operating Temperature
Storage Temperature
Junction Temperature
RF CW Incident Power:
MA4P7447, MADP-007155 Series ( die = 15°C/W), RF & DC Incident De-rating Coefficient = -21.3 mW/°C
MA4P7436, MADP-007436 Series ( die = 25°C/W), RF & DC Incident De-rating Coefficient = -16.8 mW/°C
MA4P7438, MADP-007438Series ( die = 30°C/W), RF & DC Incident De-rating Coefficient = -13.3 mW/°C
MA4P7455, MADP-007455 Series ( die = 35°C/W), RF & DC Incident De-rating Coefficient = -13.3 mW/°C
MA4P7437, MADP-007437 Series ( die = 45°C/W), RF & DC Incident De-rating Coefficient = -13.3 mW/°C
MADP-007167 Series ( die = 55°C/W), RF & DC Incident De-rating Coefficient = -13.3 mW/°C
MA4P7433, MADP-007433 Series ( die = 80°C/W), RF & DC Incident De-rating Coefficient = -10.7 mW/°C
MADP-007448 Series ( die = 80°C/W), RF & DC Incident De-rating Coefficient = -10.7 mW/°C
Total (RF + DC) Power Dissipation:
(SOT-23,): RF & DC Dissipated De-rating Coefficient = -33.3 mW/°C
5. Operation of these devices above any one of these parameters may cause permanent damage.
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
Rating
-65°C to +150°C
-65°C to +125°C
+175°C
+32 dBm
+31 dBm
+30 dBm
+30 dBm
+30 dBm
+30 dBm
+29 dBm
+32 dBm
250 mW
200 mW
Voltage Rating
150 mA DC
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V24
Packaging and Configurations
Single
SC-79 Part #
L
S
= 0.6 nH, C
P
= 0.10 pF
MADP-007436-12790T
MADP-007433-12790T
—
MADP-007448-12790T
MADP-007455-12790T
—
—
—
SOD-323 Part #
L
S
= 1.3 nH, C
P
= 0.11 pF
MA4P7436-1141T
MA4P7433-1141T
MA4P7447-1141T
MADP-007448-11410T
MA4P7455-1141T
MA4P7437-1141T
MA4P7438-1141T
MADP-007167-11410T
SOT-23 Part #
L
S
= 1.4 nH, C
P
= 0.12 pF
MA4P7436-287T
MA4P7433-287T
MA4P7447-287T
MADP-007448-0287AT
MA4P7455-287T
MA4P7437-287T
MA4P7438-287T
MADP-007167-0287AT
Single
SC70 (3L) Part #
L
S
= 1.3 nH, C
P
= 0.12 pF
MA4P7436-1146T
—
—
—
—
—
—
—
Common Cathode
SOT-23 Part #
L
S
= 1.4 nH, C
P
= 0.12 pF
MA4P7436CK-287T
MA4P7433CK-287T
MA4P7447CK-287T
MADP-007448-0287FT
MA4P7455CK-287T
MADP-007437-0287FT
MADP-007438-0287FT
MADP-007167-0287FT
SC70 (3L) Part #
L
S
= 1.3 nH, C
P
= 0.12 pF
MA4P7436CK-1146T
MA4P7433CK-1146T
—
—
MA4P7455CK-1146T
—
—
—
Common Anode
SOT-23 Part #
L
S
= 1.4 nH, C
P
= 0.12 pF
MA4P7436CA-287T
MA4P7433CA-287T
MA4P7447CA-287T
MADP-007448-0287GT
MA4P7455CA-287T
MA4P7437CA-287T
MA4P7438CA-287T
MADP-007167-0287GT
SC70 (3L) Part #
L
S
= 1.3 nH, C
P
= 0.12 pF
MA4P7436CA-1146T
MA4P7433CA-1146T
—
MADP-007448-1146GT
MA4P7455CA-1146T
—
—
—
3
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V24
Packaging and Configurations
Series Tee
SOT-23 Part #
L
S
= 1.4 nH, C
P
= 0.12 pF
MA4P7436ST-287T
MA4P7433ST-287T
MA4P7447ST-287T
MADP-007448-0287BT
MA4P7455ST-287T
MADP-007437-0287BT
MADP-007438-0287BT
MADP-007167-0287BT
SC70 (3L) Part #
L
S
= 1.3 nH, C
P
= 0.12 pF
MA4P7436ST-1146T
MA4P7433ST-1146T
—
MADP-007448-1146BT
MA4P7455ST-1146T
—
—
—
Series Tee Reverse
SOT-23 Part #
L
S
= 1.4 nH, C
P
= 0.12 pF
MADP-007436-0287DT
MADP-007433-0287DT
MADP-007155-0287DT
MADP-007448-0287DT
MADP-007455-0287DT
MADP-007437-0287DT
MADP-007438-0287DT
MADP-007167-0287DT
SC70 (3L) Part #
L
S
= 1.3 nH, C
P
= 0.12 pF
MADP-007436-1146DT
MADP-007433-1146DT
—
MADP-007448-1146DT
MADP-007455-1146DT
—
—
—
Low Inductance
SOT-23 Part #
L
S
= 0.4 nH, C
P
= 0.12 pF
MADP-007167-0287HT
MADP-007433-0287HT
4
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V24
Typical Forward Resistance vs. DC Bias Current Curves @ 100 MHz
Resistance vs. Forward Current
(MA4P7455 /MADP-007155 Series)
Resistance vs. Forward Current
(MA4P7436 /MADP-007436 Series)
Series Resistance ()
Forward Bias Current
Series Resistance ()
Forward Bias Current
Resistance vs. Forward Current
(MA4P7437 /MADP-007437 Series)
Resistance vs. Forward Current
(MA4P7438 /MADP-007438 Series)
Series Resistance ()
Forward Bias Current
Series Resistance ()
Forward Bias Current
5
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
Designers use many wireless communication systems such as Bluetooth Low Energy (BLE 4.0), Zigbee, ESP8266 Wi-Fi modules, 433MHz RF modules, Lora, nRF, etc. The choice of transmission medium depends on...
Is there a DC-DC converter chip that outputs a negative V for a certain V input? Because I need to provide dual power supplies for the op amp, what parameters should I focus on when choosing this kind...
PC uses TCP&UDP test tool to receive data sent by 2440. A novice would like to ask for help from everyone. The following are the problems: 1. If the content sent is just a line of characters in a file...
Although the M4 is coming out soon, it doesn't seem to have integrated network. The 9B96 seems to have integrated network.
So I really want to learn it.
My knowledge of M3 is superficial, but everyone...
Grace cannot be installed. It freezes when it is almost finished. I am installing Grace from http://www.ti.com.cn/tool/cn/grace. I downloaded Grace in the middle. Why can't I install it? [[i] This pos...
Who is playing WINCE60? Please send me the RIL and DLL of ARMV4I version. My WINCE60 can't find this file. Please help me! QQ: 392325349; MSN: xqhrs232@hotmail.com; email---xqhrs232@yahoo.com.cn...
Microchip's PIC18F46J50 is a low-power, high-performance 8-bit USB microcontroller (MCU) using nanoWatt XLP technology. The current in deep sleep mode can be as low as 13nA, the operating voltage i...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
Two simple circuits are implemented to drive two LEDs from a battery powered microprocessor.
This design is based on a circuit that uses three resistors and a microprocessor I/O pin as an input h...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
Microcalorimetry
is used to determine energy relationships. Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rat...[Details]
Product series: PB-B-RS232/485 interface (hereinafter sometimes referred to as "interface") is a product in the PROFIBUS bus bridge series.
The main purpose of the bridge series ...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
