Use the routines that come with the CD, the keil version is 4.21, and set it according to the USERGUIDE instructions, except that the instructions in Stellaris ICDI and USERGUIDE are different. When d...
Over the years, the country has been strongly supporting the independent research and development of four high-end chips - CPU, FPGA, Memory, and DSP, and has invested tens of billions of dollars. Fin...
If I don't set the priority for peripheral interrupts like DMA and UART, will the priority be the default when the interrupt occurs?How should I configure it during initialization? The bits of the pri...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
Editor's note: In order to help technicians or engineers who have knowledge of PIC microcontroller assembly language quickly master the method of using C language to program PIC microcontrollers, t...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
In industry, voltage 0…5 (10) V or current 0 (4)…20 mA is usually used as a method for analog signal transmission, which is also a method often used by programmable controllers. So what are the dif...[Details]
The battery and its management system are one of the key technologies of electric vehicles. In the past few years, most companies have encountered embarrassment in the development of electric vehic...[Details]
The cruise control system (CCS) of a vehicle is also called a constant speed driving system. It is an electronic control device that uses advanced electronic technology to automatically adjust the ...[Details]
introduction
As
a
software
development platform in the field of professional measurement and control, LABVIEW contains rich data acquisition, data signal analysis and powerful DAQ a...[Details]
This paper first proposed an elevator controller algorithm based on a finite state machine, and then designed a three-story elevator controller based on the algorithm. The correctness of the elevat...[Details]
introduction
As the application of single-chip microcomputers in various fields becomes more and more extensive, the requirements for their reliability are also getting higher and higher. The ...[Details]
1. Introduction
Industrial fieldbus technology is one of the technologies that has received the most attention in the automation industry in recent years, and it has brought a qualitative leap...[Details]
In recent years, fieldbus has always been a hot topic, whether in large-scale automation exhibitions or academic exchanges. The revolution brought by fieldbus to the field of industrial automation ...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
