EEWORLDEEWORLDEEWORLD

Part Number

Search
 PDF

LMV841QMGX

Description

LMV841QMGX amplifier basic information:

LMV841QMGX is an OPERATIONAL AMPLIFIER. The commonly used packaging method is SC-70, 5 PIN

LMV841QMGX amplifier core information:

The minimum operating temperature of the LMV841QMGX is -40 °C and the maximum operating temperature is 125 °C. Its maximum average bias current is 0.0003 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LMV841QMGX has a nominal slew rate of 2.5 V/us. The maximum slew rate of the LMV841QMGX given by the manufacturer is 2 mA. Its minimum voltage gain is 63100. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LMV841QMGX gain becomes 0.707 times the low-frequency gain is 4500 kHz. The LMV841QMGX has NO power. Its programmable power is NO.

The nominal supply voltage of the LMV841QMGX is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the LMV841QMGX is 800 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LMV841QMGX:

The width of LMV841QMGX is: 1.25 mm and the length is 2 mm. LMV841QMGX has 5 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 5

LMV841QMGX amplifier additional information:

LMV841QMGX adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of LMV841QMGX is: YES. Its temperature grade is: AUTOMOTIVE.

It is not a micropower amplifier. The LMV841QMGX is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G5. The corresponding JESD-609 code is: e0. The packaging code of LMV841QMGX is: TSSOP.

The materials used in the LMV841QMGX package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. LMV841QMGX package pin formats are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.

CategoryAnalog mixed-signal IC    Amplifier circuit   
File Size1MB,22 Pages
ManufacturerNational Semiconductor(TI )
Websitehttp://www.ti.com
Alternative parts:LMV841QMGX
Stay tuned Parametric Compare

LMV841QMGX Overview

LMV841QMGX amplifier basic information:

LMV841QMGX is an OPERATIONAL AMPLIFIER. The commonly used packaging method is SC-70, 5 PIN

LMV841QMGX amplifier core information:

The minimum operating temperature of the LMV841QMGX is -40 °C and the maximum operating temperature is 125 °C. Its maximum average bias current is 0.0003 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LMV841QMGX has a nominal slew rate of 2.5 V/us. The maximum slew rate of the LMV841QMGX given by the manufacturer is 2 mA. Its minimum voltage gain is 63100. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LMV841QMGX gain becomes 0.707 times the low-frequency gain is 4500 kHz. The LMV841QMGX has NO power. Its programmable power is NO.

The nominal supply voltage of the LMV841QMGX is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the LMV841QMGX is 800 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LMV841QMGX:

The width of LMV841QMGX is: 1.25 mm and the length is 2 mm. LMV841QMGX has 5 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 5

LMV841QMGX amplifier additional information:

LMV841QMGX adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of LMV841QMGX is: YES. Its temperature grade is: AUTOMOTIVE.

It is not a micropower amplifier. The LMV841QMGX is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G5. The corresponding JESD-609 code is: e0. The packaging code of LMV841QMGX is: TSSOP.

The materials used in the LMV841QMGX package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. LMV841QMGX package pin formats are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.

LMV841QMGX Parametric

Parameter NameAttribute value
Is it Rohs certified?incompatible
MakerNational Semiconductor(TI )
Parts packaging codeSC-70
package instructionSC-70, 5 PIN
Contacts5
Reach Compliance Codecompliant
ECCN codeEAR99
Amplifier typeOPERATIONAL AMPLIFIER
ArchitectureVOLTAGE-FEEDBACK
Maximum average bias current (IIB)0.0003 µA
Nominal Common Mode Rejection Ratio112 dB
frequency compensationYES
Maximum input offset voltage800 µV
JESD-30 codeR-PDSO-G5
JESD-609 codee0
length2 mm
low-biasYES
low-dissonanceYES
micropowerNO
Negative supply voltage upper limit-6.6 V
Nominal Negative Supply Voltage (Vsup)-5 V
Number of functions1
Number of terminals5
Maximum operating temperature125 °C
Minimum operating temperature-40 °C
Package body materialPLASTIC/EPOXY
encapsulated codeTSSOP
Encapsulate equivalent codeTSSOP5/6,.08
Package shapeRECTANGULAR
Package formSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
method of packingTAPE AND REEL
powerNO
power supply3.3/5/+-5 V
Programmable powerNO
Certification statusNot Qualified
Filter levelAEC-Q100
Maximum seat height1.1 mm
Nominal slew rate2.5 V/us
Maximum slew rate2 mA
Supply voltage upper limit6.6 V
Nominal supply voltage (Vsup)5 V
surface mountYES
technologyCMOS
Temperature levelAUTOMOTIVE
Terminal surfaceTin/Lead (Sn/Pb)
Terminal formGULL WING
Terminal pitch0.65 mm
Terminal locationDUAL
Nominal Uniform Gain Bandwidth4500 kHz
Minimum voltage gain63100
broadbandNO
width1.25 mm
Base Number Matches1

LMV841QMGX Related Products

LMV841QMGX LMV841MGX/NOPB LMV841MG/NOPB LMV841QMG
Description IC OP-AMP, 800 uV OFFSET-MAX, 4.5 MHz BAND WIDTH, PDSO5, SC-70, 5 PIN, Operational Amplifier IC OP-AMP, 800 uV OFFSET-MAX, 4.5 MHz BAND WIDTH, PDSO5, ROHS COMPLIANT, SC-70, 5PIN, Operational Amplifier IC OP-AMP, 800 uV OFFSET-MAX, 4.5 MHz BAND WIDTH, PDSO5, ROHS COMPLIANT, SC-70, 5PIN, Operational Amplifier IC OP-AMP, 800 uV OFFSET-MAX, 4.5 MHz BAND WIDTH, PDSO5, SC-70, 5 PIN, Operational Amplifier
Is it Rohs certified? incompatible conform to conform to incompatible
Maker National Semiconductor(TI ) National Semiconductor(TI ) National Semiconductor(TI ) National Semiconductor(TI )
Parts packaging code SC-70 SC-70 SC-70 SC-70
package instruction SC-70, 5 PIN TSSOP, TSSOP5/6,.08 TSSOP, TSSOP5/6,.08 SC-70, 5 PIN
Contacts 5 5 5 5
Reach Compliance Code compliant compliant compliant compliant
ECCN code EAR99 EAR99 EAR99 EAR99
Amplifier type OPERATIONAL AMPLIFIER OPERATIONAL AMPLIFIER OPERATIONAL AMPLIFIER OPERATIONAL AMPLIFIER
Architecture VOLTAGE-FEEDBACK VOLTAGE-FEEDBACK VOLTAGE-FEEDBACK VOLTAGE-FEEDBACK
Maximum average bias current (IIB) 0.0003 µA 0.0003 µA 0.0003 µA 0.0003 µA
Nominal Common Mode Rejection Ratio 112 dB 112 dB 112 dB 112 dB
frequency compensation YES YES YES YES
Maximum input offset voltage 800 µV 800 µV 800 µV 800 µV
JESD-30 code R-PDSO-G5 R-PDSO-G5 R-PDSO-G5 R-PDSO-G5
JESD-609 code e0 e3 e3 e0
length 2 mm 2 mm 2 mm 2 mm
low-bias YES YES YES YES
low-dissonance YES YES YES YES
micropower NO NO NO NO
Negative supply voltage upper limit -6.6 V -6.6 V -6.6 V -6.6 V
Nominal Negative Supply Voltage (Vsup) -5 V -5 V -5 V -5 V
Number of functions 1 1 1 1
Number of terminals 5 5 5 5
Maximum operating temperature 125 °C 125 °C 125 °C 125 °C
Minimum operating temperature -40 °C -40 °C -40 °C -40 °C
Package body material PLASTIC/EPOXY PLASTIC/EPOXY PLASTIC/EPOXY PLASTIC/EPOXY
encapsulated code TSSOP TSSOP TSSOP TSSOP
Encapsulate equivalent code TSSOP5/6,.08 TSSOP5/6,.08 TSSOP5/6,.08 TSSOP5/6,.08
Package shape RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR
Package form SMALL OUTLINE, THIN PROFILE, SHRINK PITCH SMALL OUTLINE, THIN PROFILE, SHRINK PITCH SMALL OUTLINE, THIN PROFILE, SHRINK PITCH SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
method of packing TAPE AND REEL TAPE AND REEL TAPE AND REEL TAPE AND REEL
power NO NO NO NO
power supply 3.3/5/+-5 V 3.3/5/+-5 V 3.3/5/+-5 V 3.3/5/+-5 V
Programmable power NO NO NO NO
Certification status Not Qualified Not Qualified Not Qualified Not Qualified
Maximum seat height 1.1 mm 1.1 mm 1.1 mm 1.1 mm
Nominal slew rate 2.5 V/us 2.5 V/us 2.5 V/us 2.5 V/us
Maximum slew rate 2 mA 2 mA 2 mA 2 mA
Supply voltage upper limit 6.6 V 6.6 V 6.6 V 6.6 V
Nominal supply voltage (Vsup) 5 V 5 V 5 V 5 V
surface mount YES YES YES YES
technology CMOS CMOS CMOS CMOS
Temperature level AUTOMOTIVE AUTOMOTIVE AUTOMOTIVE AUTOMOTIVE
Terminal surface Tin/Lead (Sn/Pb) Matte Tin (Sn) Matte Tin (Sn) Tin/Lead (Sn/Pb)
Terminal form GULL WING GULL WING GULL WING GULL WING
Terminal pitch 0.65 mm 0.65 mm 0.65 mm 0.65 mm
Terminal location DUAL DUAL DUAL DUAL
Nominal Uniform Gain Bandwidth 4500 kHz 4500 kHz 4500 kHz 4500 kHz
Minimum voltage gain 63100 63100 63100 63100
broadband NO NO NO NO
width 1.25 mm 1.25 mm 1.25 mm 1.25 mm
Base Number Matches 1 1 1 1
Teaching requirements for the course "Analog Circuit Design" for the major of electronic information engineering
[:P]Teaching requirements for the course "Analog Circuit Design" for the major of electronic information engineering1. Basic requirementsCarry out teaching according to the requirements of the Outline...
fighting Analog electronics
Without a SECTIONS specification appears, but the .out file is generated. Can it be ignored?
The specific warning is: warning #10247-D: creating output section "reset_vec" without a SECTIONS specification. What is the reason? Is there any solution? Thank you....
jonny0811 Microcontroller MCU
Development of a portable low-frequency amplitude-frequency characteristic tester
Abstract : This paper introduces an amplitude-frequency characteristic tester based on single-chip microcomputer control, which is used to measure the amplitude-frequency characteristics of active and...
fighting Test/Measurement
How to call dynamic link library under EVC?
In VS2005, you can easily use references, add the DLL file, and then add a using *** to use the classes and functions in the library. Is there a corresponding method in EVC to achieve this?...
wfkj Embedded System
WINCE Compilation
--------------------Configuration: Samsung SMDK2440A: ARMV4I_Release-------------------- Starting Build: blddemo -q ============== Generating PB Project Folders Done Generating PB Project Folders Gene...
sunnyou Embedded System
Questions about humidity sensitive resistor application circuit
I would like to ask a question about the circuit of humidity sensitive resistor application. As shown in the figure below, what are the functions of ZD1 and ZD2?...
饭牛 Analog electronics

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2407  1758  2343  249  2474  49  36  48  6  50 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号