SaBLE-x Module
Datasheet
SaBLE-x
TM
Bluetooth
®
Smart
(BLE) Module
FEATURES
Built in CC2640F128 Bluetooth Smart (BLE
4.1) System-On-Chip (SOC) 5x5mm RHB
package with 15 GPIOs
128 kB Flash / 20 kB SRAM
RF Output Power: +5 dBm
RF Receive Sensitivity: -96 dBm
Size: 11.6mm x 17.9mm x 2.4mm
Operating Voltage: 1.8V to 3.8V
Operating Temperature: -40 to +85C
8.4 mA Transmit Mode (+5 dBm)
7.4 mA Receive Mode
1μA Standby (SRAM/CPU retention and RTC
running) with quick 100 μs start up
200nA Shutdown
61μA/MHz Active CPU Current
Drivers, Bluetooth Low Energy Controller,
and bootloader in ROM
Flexible peripheral set
On board 32 kHZ and 24 MHz Crystals
Worldwide Acceptance:
FCC (USA), IC (Canada),
ETSI (Europe), Giteki (Japan), and
C-Tick (AU/NZ)
REACH and RoHS compliant
DESCRIPTION
LSR would like to announce a low-cost and low-
power consumption module which has all of the
Bluetooth Smart
4.1 functionalities.
The SaBLE-x module fully supports the single mode
Bluetooth
Low Energy operation, and the output
power can support class 2. The module provides the
ability to either put your entire application into the
integrated ARM Cortex M3 microcontroller, or use
the module in Network Processor mode in
conjunction with the microcontroller of your choice.
RF Core’s dedicated ARM Cortex M0 improves
system performance and frees up FLASH memory
for custom applications.
Need to get to market quickly? Not an expert in
Bluetooth
Low Energy? Need a custom antenna?
Do you need help with your host board? LSR Design
Services will be happy to develop custom hardware
or software, or help integrate the design. Contact
us at sales@lsr.com or call us at 262-375-4400.
APPLICATIONS
Consumer electronics
Mobile phone accessories
Sports & Fitness equipment
HID applications
Home and Building Automation, Lighting
Control, Alarm and Security
Electronic Shelf Labeling, Proximity Tags
The information in this document is subject to change without notice.
330-0166-R2.4
Copyright © 2016 LSR
Page 1 of 42
SaBLE-x Module
Datasheet
ORDERING INFORMATION
Order Number
450-0119C
450-0119R
450-0144C
450-0144R
450-0150
450-0141
Description
SaBLE-x Module, PCB Trace Antenna (Cut Tape)
SaBLE-x Module, PCB Trace Antenna (Tape & Reel)
SaBLE-x Module, External Antenna Port (Cut Tape)
SaBLE-x Module, External Antenna Port (Tape & Reel)
SaBLE-x Evaluation Kit, PCB Trace Antenna
SaBLE-x Development Kit, PCB Trace Antenna
Table 1 Orderable Model Numbers
The information in this document is subject to change without notice.
330-0166-R2.4
Copyright © 2016 LSR
Page 2 of 42
SaBLE-x Module
Datasheet
MODULE ACCESSORIES
Order Number
Description
001-0001
2.4 GHz Dipole Antenna with Reverse Polarity
SMA Connector
080-0001
U.FL to Reverse Polarity SMA Bulkhead Cable
105mm
001-0014
2.4 GHz FlexPIFA Antenna
001-0015
2.4 GHz FlexNotch Antenna
Table 2 Module Accessories
The information in this document is subject to change without notice.
330-0166-R2.4
Copyright © 2016 LSR
Page 3 of 42
SaBLE-x Module
Datasheet
BLOCK DIAGRAM
Off Module Antenna
(optional)
VCC
/Reset
PCB
Trace
Antenna
(optional)
Band
Pass
Filter
CC2640
Bluetooth Low Energy (BLE)
System-on-Chip (SOC)
2
15
2 Wire
JTAG
I/O
32 kHz
Crystal
24 MHz
Crystal
SaBLE-x Module
Figure 1 SaBLE-x Module Block Diagram
The information in this document is subject to change without notice.
330-0166-R2.4
Copyright © 2016 LSR
Page 4 of 42
SaBLE-x Module
Datasheet
TABLE OF CONTENTS
FEATURES ................................................................................................................................... 1
APPLICATIONS ............................................................................................................................ 1
DESCRIPTION .............................................................................................................................. 1
ORDERING INFORMATION .......................................................................................................... 2
MODULE ACCESSORIES................................................................................................................ 3
BLOCK DIAGRAM ........................................................................................................................ 4
FOOTPRINT AND PIN DEFINITIONS .............................................................................................. 7
PIN DESCRIPTIONS ...................................................................................................................... 8
ELECTRICAL SPECIFICATIONS ....................................................................................................... 9
Absolute Maximum Ratings ................................................................................................................................... 9
Recommended Operating Conditions .................................................................................................................... 9
General Characteristics .......................................................................................................................................... 9
DC Characteristics ................................................................................................................................................ 10
General Power Consumption ............................................................................................................................... 11
RF Characteristics ................................................................................................................................................ 12
Wakeup Timing .................................................................................................................................................... 13
MODULE OUTPUT CONFIGURATION .......................................................................................... 15
SOLDERING RECOMMENDATIONS ............................................................................................. 17
Recommended Reflow Profile for Lead Free Solder ............................................................................................. 17
CLEANING ................................................................................................................................. 18
OPTICAL INSPECTION ................................................................................................................ 18
REWORK ................................................................................................................................... 18
SHIPPING, HANDLING, AND STORAGE ....................................................................................... 18
Shipping ............................................................................................................................................................... 18
Handling .............................................................................................................................................................. 18
Moisture Sensitivity Level (MSL) .......................................................................................................................... 18
Storage ................................................................................................................................................................ 18
The information in this document is subject to change without notice.
330-0166-R2.4
Copyright © 2016 LSR
Page 5 of 42
京公网安备 11010802033920号
EEWORLD
