RoHS Recast Compliant
USB-Disk Module
Ⅱ
Plus
Product Specifications
June 10
th
, 2014
Version 2.2
Apacer Technology Inc.
1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan
Tel: +886-2-2267-8000
Fax: +886-2-2267-2261
www.apacer.com
USB-Disk Module
Ⅱ
Plus
AP-UMxxxxXXXXX-XXXXXT
FEATURES:
•
•
USB2.0 High-Speed and USB1.1 Full-
Speed compatible interface
Capacity
– 256, 512 MB
– 1, 2, 4, 8, 16, 32 GB
Performance
– Sustained read: up to 34 MB/s
– Sustained write: up to 22 MB/s
Intelligent USB Module
– Advanced wear-leveling algorithms to
substantially increase longevity of flash
media
– BCH (24 bit) Error Detection Code/Error
Correction Code (EDC/ECC)
Extended Data Protection (Optional)
– Write protection setting by jumper for
prevention of data overwrites.
MTBF
6
– Approximately greater than 4.20 x 10
hours
•
•
Support boot-up function for OS
– Windows XP Embedded
– Windows CE
– Linux
– Windows 7
Temperature ranges
– 0° to 70° for operation (standard)
C
C
1
– -40° to 85° for operation (ET )
C
C
– -40° to 85° for storage
C
C
Power consumption (typical)
– Active mode: 181 mA
– Idle mode: 68 mA
– Operating voltage: 5V (with a certain
percentage of tolerance)
Connector
– 10-pin (2x5) female header
NAND Flash type:
SLC
Supports Ready Boost for Vista
RoHS Recast Compliant (2011/65/EU)
Support Non-Removable Setting
•
•
•
•
•
•
•
•
•
•
1. Extended Temperature
Notes: the results for performance and power consumption addressed here may vary in real world platforms.
1
© 2014 Apacer Technology, Inc.
Rev. 2.2
USB-Disk Module
Ⅱ
Plus
AP-UMxxxxXXXXX-XXXXXT
TABLE OF CONTENTS
1. General Description
..............................................................................3
1.1 Performance-optimized Controller....................................................................................................... 3
1.1.1 Error Correction Code (ECC) ........................................................................................................................3
1.1.2 Wear-Leveling ...............................................................................................................................................3
1.1.3 Write Protection Mode (Optional) ..................................................................................................................3
2. Functional Block Diagram.....................................................................4
3. Pin Assignment......................................................................................5
3.1 Type A, Type B, and Type C ............................................................................................................... 5
3.2 Type D STD ................................................................................................................................... 6
3.3 Type D LP ..................................................................................................................................... 7
3.4 Type E (LP) ......................................................................................................................................... 8
4. Performance & Reliability Specifications
............................................9
4.1 Capacity Specifications ....................................................................................................................... 9
4.2 Performance Specifications................................................................................................................. 9
4.3 Environmental Specifications .............................................................................................................. 9
4.4 MTBF ................................................................................................................................................. 10
5. Electrical Specification
......................................................................11
5.1 AC Characteristics............................................................................................................................. 11
6. Physical Dimension
.............................................................................12
6.1 Horizontal Design .............................................................................................................................. 12
6.1.1 Type A (STD 90D)......................................................................................................................................12
6.1.2 Type B (STD 90D-MH) ...............................................................................................................................13
6.1.3 Type C (STD 90D-MS) ...............................................................................................................................14
6.2 Vertical Design .................................................................................................................................. 15
6.2.1 Type D (STD 180D)....................................................................................................................................15
6.3 Low Profile Design............................................................................................................................. 16
6.3.1 Type D (LP 180D) .......................................................................................................................................16
6.3.1 Type E (LP 90D) .........................................................................................................................................17
7. Product Ordering Information.............................................................18
7.1 Product Code Designation ................................................................................................................ 18
7.2 Valid Combinations ........................................................................................................................... 19
© 2014 Apacer Technology, Inc.
﹚ ﹙
﹚ ﹙
2
Rev. 2.2
USB-Disk Module
Ⅱ
Plus
AP-UMxxxxXXXXX-XXXXXT
1. General Description
Apacer’s USB-Disk Module (UDM) is a high performance, embedded solid state drive (SSD) designed to
replace a conventional IDE hard disk drive. UDM SSD can be plugged into a standard Embedded USB
connector commonly found in desktops, portable PC systems and industrial PC systems. This product is
well suited for embedded flash storage applications offering new and expanded functionality as well as
more cost-effective designs, better performance and increased reliability.
1.1 Performance-optimized Controller
The heart of an UDM is the USB controller, which translates standard USB signals into the data and
controls of the flash media. This proprietary USB controller is specifically designed to attain high data
throughput from host to flash.
1.1.1 Error Correction Code (ECC)
The UDM uses BCH Error Detection Code (EDC) and Error Correction Code (ECC) algorithms which
correct up to 24 random single-bit errors for each 1024-byte block of data depending on spare area of
flash memory. High performance is achieved through hardware-based error detection and correction.
1.1.2 Wear-Leveling
Flash memory can be erased a limited number of times, This number is called the erase cycle limit, or
write endurance limit, The erase cycle limit applies to each individual erase block in the flash device.
In a typical application, and especially if a file system is used, specific pages are constantly updated (e.g.,
the page that contains the FAT, registry, etc.). Without any special handling, these pages would wear out
more rapidly than other pages, reducing the lifetime of the entire flash.
To overcome this inherent deficiency, Apacer’s USB-Disk Module (UDM) uses wear-leveling algorithm.
This wear-leveling algorithm ensures that consecutive writes of a specific sector are not written physically
to the same page in the flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime.
The wear-leveling mechanism provides write/erase cycles for reliable data storage over an extended
period.
1.1.3 Write Protection Mode (Optional)
When the device is configured to the Write-Protection mode, it enhances the data security and protection.
This feature prevents the stored data from inadvertent system writes or erases, and viruses.
3
© 2014 Apacer Technology, Inc.
Rev. 2.2
USB-Disk Module
Ⅱ
Plus
AP-UMxxxxXXXXX-XXXXXT
2. Functional Block Diagram
The USB-Disk Module (UDM) contains a controller, embedded firmware, and Flash Media with a female
connector. The UDM interfaces with the host system allowing data to be written to and read from the
Flash Media.
Flash
Media
Host
USB Interface
Flash
Management
Controller
Flash
Media
Figure 2-1:
Functional block diagram
4
© 2014 Apacer Technology, Inc.
Rev. 2.2
京公网安备 11010802033920号
EEWORLD
