35W Single Output Switching Power Supply
Features :
L P V- 3 5
series
Constant voltage mode power supply
Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Fully isolated plastic case
Cooling by free air convection
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications
2 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
OVER CURRENT
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
Note.4
LPV-35-5
5V
6A
0 ~ 6A
30W
6.0%
1.0%
4.0%
Note.6
500ms, 20ms / 230VAC
LPV-35-12
12V
3A
0 ~ 3A
36W
120mVp-p
5.0%
2.0%
LPV-35-15
15V
2.4A
0 ~ 2.4A
36W
120mVp-p
LPV-35-24
24V
1.5A
0 ~ 1.5A
36W
150mVp-p
LPV-35-36
36V
1A
0 ~ 1A
36W
150mVp-p
RIPPLE & NOISE (max.)
Note.2
80mVp-p
500ms, 20ms / 115VAC at full load
50ms/230VAC
90 ~ 264VAC
47 ~ 63Hz
77%
16ms/115VAC at full load
85%
85%
86%
86%
1.1A/115VAC 0.7A/230VAC
COLD STAR 30A/115VAC
60A/230VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +75
-40 ~ +80
(Refer to output load derating curve)
, 10 ~ 95% RH
20 ~ 90% RH non-condensing
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Design refer to UL1310 Class 2,TUV EN60950-1, CAN/CSA C22.2 No. 223-M91, EN61347-2-13, IP66
I/P-O/P:3KVAC
41.4 ~ 48.6V
SAFETY & ISOLATION RESISTANCE
I/P-O/P:>100M Ohms/500VDC 25 70%RH
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
743.5Khrs min. MIL-HDBK-217F (25 )
148*40*30mm (L*W*H)
0.34Kg; 40pcs/14.6Kg/0.63CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:LPV-35-SPEC 2008-06-03
京公网安备 11010802033920号
EEWORLD
