Min. 1,000MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section)
1,000 Vrms for 1min. (Detection current: 10mA)
5,000 Vrms for 1min. (Detection current: 10mA)
12,000 V (Initial)
Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time)
100 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
1,000 m/s
2
(Half-wave pulse of sine wave: 6 ms)
10 to 55 Hz at double amplitude of 2 mm (Detection time: 10μs)
10 to 55 Hz at double amplitude of 3 mm
Min. 10
6
(at 180 times/min.)
Min. 5
×
10
4
(at 8A 250V AC, at 20 times/min.)
Min. 2
×
10
4
(at 16A 277V AC, ON:OFF = 1s:5s)
Min. 10
5
(at 5A 250V AC, at 20 times/min.)
Min. 5
×
10
4
(at 8A 250V AC, at 20 times/min.)
(IEC60335-1 type only)
Min. 2.5
×
10
4
[Inrush 100A 600W (120V AC)
—
Tungsten]
Cycle rate ON:OFF = 1s:59s
Temperature: –40°C to +85°C
–40°F to +185°F
(8A or less),
Temperature: –40°C to +85°C
–40°F to +185°F
–40°C to +70°C
–40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and
(Over 8A to 16A)
condensing at low temperature)
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
Approx. 8 g
.28 oz
(Low profile type: Approx. 7.5 g
.26 oz)
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Conditions
Conditions for operation, transport and
storage*
3
*
4
Unit weight
Notes: *1. Minimum switching load is a guide to the lower current limit of switching under the micro-load. This parameter is changed by the condition, such as switching times,
environment condition, and expected reliability. Therefore, Panasonic Corporation cannot assure the reliability. When the relay is used lower than minimum
switching load, reliability is attrition. Please use the relay over minimum switching load.
*2. Wave is standard shock voltage of
±1.2×50μs
according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. Allowable range when in original packaging is –40°C to +70°C
–40°F to +158°F.
–3–
ASCTB8E 201603-T
DW (ADW1)
REFERENCE DATA
■
Standard type and Inrush type
1. Max. switching capacity (AC resistive load)
■
Standard type
1. Set time (1 coil latching type)
Tested sample: ADW1106, 15 pcs
Ambient temperature: 28°C
82.4°F
Contact load: 5V DC, 10mA
2. Reset time (1 coil latching type)
Tested sample: ADW1106, 15 pcs
Ambient temperature: 28°C
82.4°F
Contact load: 5V DC, 10mA
7.0
6.0
Reset time, ms
5.0
4.0
Max.
3.0
2.0
1.0
Min.
100
7.0
6.0
Contact current, A
Set time, ms
Inrush type
5.0
4.0
3.0
2.0
1.0
Max.
Min.
10
8
Standard type
1
1
10
100 250
Contact voltage, V
1000
0.0
70
80
90
100 110 120
Coil applied voltage, %V
130
0.0
70
80
90
100 110 120
Coil applied voltage, %V
130
■
Inrush type
3. Ambient temperature characteristics
Tested sample: ADW1106, 6pcs
Ambient temperature: –40°C to +85°C
–40°F to +185°F
30
Change rate
to nominal
voltage, %V
20
Reset voltage
10
Ave.
Ave.
20 40
-10
-20
-30
60
80 100
Set time, ms
1. Set time (1 coil latching type)
Tested sample: ADW1112HL, 30 pcs
Ambient temperature: 28°C
82.4°F
Contact load: 5V DC, 10mA
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
Max.
Min.
2. Reset time (1 coil latching type)
Tested sample: ADW1112HL, 30 pcs
Ambient temperature: 28°C
82.4°F
Contact load: 5V DC, 10mA
7.0
6.0
Reset time, ms
5.0
4.0
3.0
2.0
1.0
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
Max.
Min.
Ambient
temperature,
°C
-60 -40 -20
0
Set voltage
3. Set time (2 coil latching type)
Tested sample: ADW1212HL, 30 pcs
Ambient temperature: 28°C
82.4°F
Contact load: 5V DC, 10mA
7.0
6.0
Set time, ms
5.0
4.0
3.0
2.0
1.0
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
Max.
Min.
4. Reset time (2 coil latching type)
Tested sample: ADW1212HL, 30 pcs
Ambient temperature: 28°C
82.4°F
Contact load: 5V DC, 10mA
7.0
6.0
Reset time, ms
5.0
4.0
3.0
2.0
1.0
0.0
70 80 90 100 110 120 130 140 150 160
Coil applied voltage, %V
Max.
Min.
5. Ambient temperature characteristics
Tested sample: ADW1105HL, 6pcs
Ambient temperature: –40°C to +85°C
–40°F to +185°F
30
Change rate
to nominal
voltage, %V
20
10
Reset voltage
Ave.
Ave.
Ambient
temperature,
°C
-60 -40 -20
0
20 40
-10
-20
-30
Set voltage
60
80 100
–4–
ASCTB8E 201603-T
DW (ADW1)
DIMENSIONS
(mm
inch)
1. Standard height type
CAD Data
24.00
.945
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://industrial.panasonic.com/ac/e/
京公网安备 11010802033920号
EEWORLD
