High Temperature 200°C, Radial, Molded, X7R Dielectric,
50 – 200 VDC (Industrial Grade)
Overview
KEMET’s High Temperature 200ºC epoxy molded radial
through-hole ceramic capacitors in X7R dielectric feature
a robust and proprietary dielectric system that offers
industry-leading performance in extreme high pressure
and high temperature environments up to 200°C. These
capacitors are designed specifically to withstand the
severe shock and vibration conditions associated with
deep-well and horizontal drilling activities and are well
suited for use in aerospace engine compartments,
geophysical probes, hybrid and electric automotive motor
drives and defense applications.
As high temperature electronic module complexity
increases, the size reduction of components becomes
more and more critical. These devices are significantly
smaller by volume than most competitor radial molded
capacitors, allowing for downsizing and replacement
opportunities of larger high temperature precious metal
electrode (PME) and base metal electrode (BME) dielectric
system devices. They feature gold-plated lead wires
for temperature resistance and an epoxy molded case for
environmental protection and mechanical durability.
These epoxy molded radial through-hole ceramic capacitors
in X7R dielectric achieve high dielectric breakdown,
low leakage current and minimal parametric shift while
maintaining predictable performance characteristics with
respect to variations in temperature, applied voltage and
time. These devices are suited for bypass and decoupling
applications or for frequency discriminating circuits where Q
and stability of capacitance characteristics are not critical.
Capacitance change is limited to ±15% from −55°C to +125°C
and +15%/−55% at +200°C.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C
062
H
105
Capacitance
Code (pF)
Two significant digits
and number of zeros
Use 9 for 1.0 – 9.9 pF
ex. 2.2 pF = 229
K
Capacitance
Tolerance
1
J = ±5%
K = ±10%
M = ±20%
5
R
5
G
Lead
Finish
2
G=
Gold (Au)
A
Failure
Rate
A=
N/A
7303
Packaging
C-Spec
3
Blank = Bulk Bag
T250 = 250 pcs/
12" Reel
T500 = 500 pcs/
12" Reel
T1K0 = 1,000 pcs/
12" Reel
7301 = Full Reel Qty/
12" Reel
7303 = Full Reel Qty/
12" Reel
7061 = Bulk Tray
Style/
Specification/
Ceramic
Size
Series
052
062
H=
High Temp
200ºC
Rated
Voltage Dielectric Design
(VDC)
5 = 50
R=
5=
1 = 100
X7R
Multilayer
2 = 200
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.
3
Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character positions are
left blank.
3
C-Spec 7301 can only be used when ordering 052 style/size.
3
C-Spec 7303 can only be used when ordering 062 style/size.
High Temperature 200°C, Radial, Molded, X7R Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1B – C062 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C062 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
Voltage Code
50
5
100
1
200
2
Capacitance
4,700 pF
5,600 pF
6,800 pF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
1.0 µF
Capacitance
Tolerance
Capacitance Code (Available Capacitance)
C062H472(1)2R5GA(2)
C062H562(1)2R5GA(2)
C062H682(1)2R5GA(2)
J = ±5%
K = ±10%
M = ±20%
C062H124(1)5R5GA(2)
C062H154(1)5R5GA(2)
C062H184(1)5R5GA(2)
C062H224(1)5R5GA(2)
C062H274(1)5R5GA(2)
C062H334(1)5R5GA(2)
C062H394(1)5R5GA(2)
C062H474(1)5R5GA(2)
C062H564(1)5R5GA(2)
C062H684(1)5R5GA(2)
C062H824(1)5R5GA(2)
C062H105(1)5R5GA(2)
C062H563(1)1R5GA(2)
C062H683(1)1R5GA(2)
C062H823(1)1R5GA(2)
C062H104(1)1R5GA(2)
C062H124(1)1R5GA(2)
Rated Voltage (VDC)
Voltage Code
50
5
100
1
200
2
(1) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: J, K, M
(2) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 and 7670981, other patents pending, and any foreign counterparts.
Packaging Quantities
Packaging Options
Ordering Code
C-Spec
2
Style/
Series
1
Bulk Bag
(default)
1
Bulk Tray
Tape and Reel
Packaging Quantities
3
n/a
7061
T250
T500
T1K0
7301
7303
C052H
C062H
100 pcs/bag
100 pcs/bag
50 pcs/tray
40 pcs/tray
250
250
500
500
1,000
1,000
2,000
n/a
n/a
1,500
Default packaging for this product series is "Bulk Bag". KEMET will assume " Bulk Bag" packaging is required unless a valid C-spec is included in the
15th thru 18th character positions of the ordering code. For more information see "Ordering Information" section of this document.
1, 2
The " Ordering Code C-Spec" is a four-digit code that follows the KEMET part number and identifies any special packaging or processing
requirements. Failure to include a C-Spec when ordering will result in the default packaging option. Default packaging for this product series is "Bulk
Bag".
3
Packaging quantities reported above are considered "minimum order quantities" and are mandatory.
Urgently recruiting switching power supply engineers (location: Jiaxing, Zhejiang)!!! Job responsibilities: Mainly responsible for the development of protection boards, controllers, chargers, etc. Job...
I downloaded a device package online. After making the PCB, I found that there were no pins and no solder mask, and there was a layer of green paint on it. Is there any good way to remove the green pa...
[i=s]This post was last edited by 37°男人 on 2015-7-3 10:31[/i] [size=13.63636302947998px][size=13.63636302947998px]There are 4 executable programs in i2c tools:[/size] [size=13.63636302947998px]i2cdete...
Make a minimum system , without local display , connect to the computer system through cables or wireless systems for various processing ( display \ control \ analysis \ archiving, etc. ),The purpose ...
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
1 Source of creativity
With the further development of electronic technology, electronic pets have gradually entered people's family life. At present, there are two main categories of relative...[Details]
With the development of science, the use of variable frequency technology is becoming more and more widespread, and it is used in both industrial equipment and household appliances. Inverter air co...[Details]
Electric vehicles are now widespread, but they've brought with them a host of problems, the most prominent of which is charging. Small electric vehicles (EVs) are a new form of transportation in a ...[Details]
Keysight Technologies is combining its electromagnetic simulator with Synopsys' AI-driven RF design migration flow to create an integrated design flow for migrating from TSMC's N6RF+ process techno...[Details]
Plessey Semiconductors has been acquired by Haylo Labs, which was established in March last year with a $100 million, five-year loan from Chinese technology company Goertek.
Haylo Labs w...[Details]
In the field of intelligent driving, regulations are becoming increasingly stringent, and the technical threshold continues to rise. Especially after the traffic accident in March 2025, the Ministr...[Details]
In daily life, when we purchase a transformer, we are faced with the installation and wiring procedures. Generally speaking, large transformers such as power transformers are equipped with speciali...[Details]
Introduction: In digital circuit calculations, there is no concept of decimal points. You know where the decimal is, but the circuit does not know where the decimal point is. Therefore, you need to...[Details]
ESD protection diodes are specialized for small-signal ESD protection or surge protection TVS arrays, often used for multi-circuit protection. Their small package size, low on-state voltage, high i...[Details]
Deep in the laboratory, a seemingly ordinary piece
of
battery
material
was fed into the China Advanced Research Reactor (CARR). Scientists activated the neutron depth profiling device,...[Details]
With the improvement of China's supporting infrastructure and the accumulation of technology and capital, demand for industrial automation and intelligent applications of machine vision technology ...[Details]
Mr. Wang, a BYD owner, recently experienced a "5-minute charge" at a highway service area, boasting a 400-kilometer range. He marveled at the rapid evolution of new energy technol...[Details]
Why does the xenon lamp not light up?
There are many reasons why a xenon lamp might not light up. Poor contact, a damaged component, or a blown bulb are all possible reasons. This requires a l...[Details]
Introduction
With the development of mobile internet, technological advancements, and the introduction of high-performance, low-power processing chips, the variety of smart wearable devices has...[Details]
Buy&Sell
京公网安备 11010802033920号
EEWORLD
