AMP & ELCON Power Connector Layout Forms
Table of Contents
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
© Copyright 2007, 2006, and 2005
by Tyco Electronics Corporation.
All International Rights Reserved.
AMP, ELCON, FLATPAQ, MINIPAK,
MULTI-BEAM XL, TE LOGO and
TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
MULTI-BEAM XL Custom Connector Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
MINIPAK Custom Connector Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FLATPAQ Connector Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mini Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mini Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Lower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
75A Middle Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
75A Middle Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . 11
125A Middle Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
125A Middle Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . 13
200A Middle Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
200A Middle Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . 15
Square Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Square Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Top Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Top Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Double Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Double Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DualPower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DualPower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . 23
QuadPower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
QuadPower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . 25
In-Line QuadPower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . 26
In-Line QuadPower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . 27
W5 Power Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
W5 Power Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
HV8P Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
HV8P Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
P10S0 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
P10S0 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
P10S22 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
P10S22 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
P12S12 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
P12S12 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
P0S30 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
P0S30 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted mate-
rials. Part numbers in this catalog are identified as:
RoHS Compliant
— Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■
Cross-Reference from
Non-compliant to Compliant
Products
■
Ability to browse RoHS
Compliant Products in our
on-line catalog
■
Downloadable Technical Data
Customer Information
Presentation
■
More detailed information
regarding the definitions used above
■
So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
2
Catalog 6-1773444-7
Revised 10-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: +44-(0) 800-267-666
AMP & ELCON Power Connector Layout Forms
MULTI-BEAM XL Custom Connector Worksheet
PCB Mount
D
C
B
A
1
Hold
Down
2
A
N
1 2 3 4 5 N
B
1
2
3
C
4
N
Mounting
Hole
Cable Mount
Plugs
XYZ Floating
XYZ Floating
Header/Plug (Right Angle Shown)
D
C
B
A
N
3
C
2
1
N 5 4 3 2 1
B
N
3
A
2
1
Slide-to-Lock
Squeeze-to-
Release
Receptacle (Vertical Shown)
Electrically Hot
To create a unique configuration for MULTI-BEAM XL Connectors simply complete this worksheet and forward it to your Tyco Electronics sales engineer.
1. Application
2. Gender
3. Orientation
4. Termination
Board-to-Board
Plug (Male)
Cable Only
PCB Only
(Cable Only)
Power
Signal
8 AWG
22 AWG
10 AWG
24 AWG
Solder tail .135″ [3.43mm]
Solder tail .165″ [4.19mm]
Right Angle
Cable-to-Board
Receptacle (Female)
Blind Mate specify Floating or Slide-to-Lock receptacle
Vertical
Latching
12 AWG
26 AWG
Press-Fit .120″ [3.05mm]
Press-Fit .135″ [3.43mm]
Press-Fit .165″ [4.19mm]
14 AWG
5. Termination Style
(PCB Only)
6. Mounting to PCB
Hold Downs (one on either end)
.122
′′
[3.10mm] Mounting holes (Accepts #4 screws, right angle connectors only)
.150
′′
[3.81mm] Mounting holes (Accepts #6 screws, right angle connectors only)
7. Select # of Contacts
___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the position(s) to be loaded with Pre-mate contact (Receptacles only)
(Mate-First-Break-Last) ( i.e. #1,#3, etc.)
Contact Centerline Spacings:
.200
′′
[5.08mm] (HDP)
.250
′′
[6.35mm] (P)
.300
′′
[7.62mm](ACP)
Section B:
(Signal Contacts) ___ Enter # of Signal Contacts (Multiples of 8 are standard, i.e. 16, 24, 32...)
___ Enter the Positions with Post-Mate Contacts (Mate-Last-Break-First, Plugs only)
Note: Row A is standard (i.e. A1, A3, etc.)
Section C:
(Power Contacts) ___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the positions to be loaded with Pre-Mate Contacts (Receptacles only)
(Mate-First-Break-Last, i.e. #1, #3, etc.)
Contact Centerline Spacings:
.200
′′
[5.08mm] (HDP)
.250
′′
[6.35mm] (P)
.300
′′
[7.62mm] (ACP)
Section A:
(Power Contacts)
8. Additional Requirements
9. Customer Information
Name: __________________________Company: ____________________Location: ________________________
Phone: __________________________Fax:
__________________________________
e-mail:
_
________________________
(Submit to your local Tyco Electronics Sales Engineer)
AMP, ELCON, MULTI-BEAM XL, TE LOGO and TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
3
Catalog 6-1773444-7
Revised 10-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: +44-(0) 800-267-666
AMP & ELCON Power Connector Layout Forms
MINIPAK Custom Connector Worksheet
MINIPAK Connector
a.
Enter your information in the table to the right.
b.
Specify the design requirements for your MINIPAK Connector
configuration in steps 1 through 5 shown below.
c.
Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
Tyco Electronics will recommend a MINIPAK Connector configuration
based on the specified requirements and issue a Customer Drawing for
your approval.
This drawing will have a unique Part Number specific to your
configuration, which you should reference whenever you make an
inquiry or place an order.
Company
Contact Name
Telephone
Email Address
I am:
❏
End user
❏
Contract manufacturer (end user:
Signature
Today’s Date
Annual Quantity Required
ENTER CUSTOMER INFORMATION
Location
Title
Fax
)
1. AC INPUT
❏
No AC input required
2. SIGNAL CONTACTS
❏
No signal contacts required
❏
6 contacts
❏
24 contacts
❏
30 contacts
❏
Other: ________________
❏
Signal sequencing required (two pin lengths available; write requirements under NOTES below.)
3. DC INPUT/OUTPUT
Write the current, voltage and sequencing requirements for each of the DC lines required by your application. Tyco Electronics will use
this information to configure the DC side of your MINIPAK Connector with the appropriate number of contacts and contact spacing.
DC Requirements
DC1
Current (A)
Voltage (V)
Blade Length
Standard
Premate
DC2
DC3
DC4
DC5
DC6
DC7
DC8
❏
125 VAC spacing
❏
250 VAC spacing
4. BOARD MOUNTING STYLE
Straight Socket
(choose one)
❏
Short solder tail (.062" thick boards)
❏
Long solder tail (.093/.125" thick boards)
❏
Compliant press-fit tails (.093" min. thick board recommended)
5. OTHER REQUIREMENTS
❏
Alignment guides required
❏
Connector length restriction, if any: ________ " (________ mm)
For further clarity, you can attach a sketch to this form if necessary.
❏
Sketch attached: _____ pages
NOTES:
Right Angle Blade
(choose one)
❏
Short solder tail (for .062" thick boards)
❏
Long solder tail (.093/.125" thick boards)
AMP, ELCON, MINIPAK, TE LOGO and TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
4
Catalog 6-1773444-7
Revised 10-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: +44-(0) 800-267-666
AMP & ELCON Power Connector Layout Forms
FLATPAQ Connector Layout Form
Instructions
1. Indicate the connector layout by filling in the FP number of each mod-
ule required in the boxes, one per box. Use one form per mated pair.
2. Left to right order of the modules should match
mating face views
of
the connector.
When laying out right angle assemblies,
make sure you
look at the mating face with the termination tails facing downwards.
3.
For solder terminated assemblies,
indicate the tail length for
each half of the connector using the checkboxes to the right of the
layout grid.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
Upon receipt of this form, Tyco Electronics will generate a Customer
Drawing for you to check and approve prior to connector production.
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
Company
Contact Name
Telephone
Email Address
I am:
❏
End user
❏
Contract manufacturer (end user: )
Signature
Today’s Date
Annual Quantity Required
ENTER CUSTOMER INFORMATION
Location
Title
Fax
Write the “FP” numbers to indicate the layout of one half of the connector assembly, matching the left to right order with the mating face view of the connector (right angle assembly tails facing downwards).
FP
FP
FP
FP
Solder Tail Options
❏
.115" (2.9 mm); .062" thick boards
❏
.177" (4.5 mm); .093/.125" boards
Write the “FP” numbers to indicate the layout of the mate of the above assembly, matching the left to right order with the mating face view of the connector (right angle assembly tails facing downwards).
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
FP
Solder Tail Options
❏
.115" (2.9 mm); .062" thick boards
❏
.177" (4.5 mm); .093/.125" boards
Right Angle
Mount
250 V Power Modules
Signal Modules
FP151
FP152
FP153
FP104
FP512
Standard Blade
Premate Blade Postmate Blade Hot Plug Socket Spacer, 250 V
FP105
FP106
FP107
FP204
Float, Standard
Float, Premate Float, Postmate Hot Plug, Press-fit
FP205
FP206
FP207
Hot Plug, Press-fit Hot Plug, Press-fit Hot Plug, Press-fit
FP302
24-Pin
FP402
24-Pin, Press-fit
FP303
24-Pin Socket
FP403
24-Pin, Press-fit
FP314
6-Pin
FP414
6-Pin,
Press-fit
FP315
6-Pin Socket
FP415
6-Pin,
Press-fit
600 V Power Modules
Mounts
Guides
FP155
FP156
FP157
FP120
Standard Blade
Premate Blade Postmate Blade Hot Plug Socket
FP121
FP122
FP123
FP220
Float, Standard
Float, Premate Float, Postmate
Hot Plug,
Press-fit
FP221
FP222
FP223
Hot Plug, Press-fit Hot Plug, Press-fit Hot Plug, Press-fit
FP514
Spacer, 600 V
FP500
FP501
Left Flange Right Flange
Mount
Mount
Right Angle
Guide Sockets
FP506 Passive
FP516 Active
FP507
Right Angle
Passive
Guide Pin
Straight Mount
250 V Power Modules
Signal Modules
Note:
All modules
FP150
Socket, Solder
are solder tail
FP250
termination unless
Socket, Press-fit
indicated as
FP100
compliant Press-fit.
Hot Plug, Solder
Select solder tail
FP200
length using check
Hot Plug, Press-fit
boxes to the right of
the connector layout
600 V Power
grid above. 0.093" or
thicker boards are
recommended for
compliant
Press-fit termination
FP154
style. Consult
Socket, Solder
Tyco Electronics
FP254
for signal module
Socket, Press-fit
sequencing. See
FP116
Catalog 1773096 for
Hot Plug, Solder
benefits of Hot Plug
FP216
Hot Plug, Press-fit
and Float options.
FP161
Standard Blade
FP101
Float, Standard
FP201
Hot Plug,
Press-fit
FP162
Premate Blade
FP102
Float, Premate
FP202
Hot Plug,
Press-fit
FP163
Postmate Blade
FP103
Float, Postmate
FP203
Hot Plug,
Press-fit
FP511
Spacer, 250 V
FP300
FP318
24-Pin
24-Pin Socket
FP400
FP418
24-Pin, Press-fit 24-Pin Skt, Press-fit
FP301
24-Pin Skt, 3A Rated
FP401
24-Pin Skt, 3A, Press-fit
FP312
FP313
6-Pin 6-Pin Socket,
3A rated
FP412
6-Pin,
FP413
Press-fit 6-Pin Skt,
3A, Press-fit
Modules
Mounts
Guides
FP165
Standard Blade
FP117
Float, Standard
FP217
Hot Plug,
Press-fit
FP166
Premate Blade
FP118
Float, Premate
FP218
Hot Plug,
Press-fit
FP167
Postmate Blade
FP119
Float, Postmate
FP219
Hot Plug,
Press-fit
FP513
Spacer, 600 V
FP500
FP501
Left Flange Right Flange
Mount
Mount
FP502
Straight Guide Pins
Straight
FP503 Passive
Passive
FP515 Active, M3
Guide Socket FP517 Active, 4-40
AMP, ELCON, FLATPAQ, TE LOGO and TYCO ELECTRONICS
are trademarks of Tyco Electronics Corporation.
5
Catalog 6-1773444-7
Revised 10-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: +44-(0) 800-267-666
Embedded System
京公网安备 11010802033920号
EEWORLD
