SL2S5002; SL2S5102
ICODE SLIX-L
Rev. 3.4 — 27 August 2012
193134
Product data sheet
COMPANY PUBLIC
1. General description
The ICODE SLIX-L IC is a dedicated chip for smart label applications with the need for a
leaner custom-specific command set, smaller memory and/or a product which takes care
of the increasing demand for perfect customer privacy. This IC is another member of our
ICODE SLIX product family that is fully compliant with the ISO standards ISO/IEC 15693
(Ref.
1)
and ISO/IEC 18000-3 (Ref.
4),
prolonging a successful story of NXP in the field of
vicinity identification systems.
The ICODE system offers the possibility of operating labels simultaneously in the field of
the reader antenna (anticollision). It is designed for long range applications.
1.1 Contactless energy and data transfer
Whenever connected to a very simple and easy-to-produce type of antenna (as a result of
the 13.56 MHz carrier frequency) made out of a few windings printed, winded, etched or
punched coil, the ICODE SLIX-L IC can be operated without line of sight up to a distance
of 1.5 m (gate width). No battery is needed. When the smart label is positioned in the field
of an interrogator antenna, the high speed RF communication interface enables data to be
transmitted up to 53 kbit/s.
1.2 Anticollision
An intelligent anticollision function enables several tags to operate in the field
simultaneously. The anticollision algorithm selects each tag individually and ensures that
the execution of a transaction with a selected tag is performed correctly without data
corruption resulting from other tags in the field.
1.3 Security and privacy aspects
•
Unique IDentifier (UID):
The UID cannot be altered and guarantees the uniqueness of each label.
•
Password protected Label Destroy:
The 32-bit Destroy password enables an addressed label to be destroyed with the
DESTROY SLIX-L command. That status is irreversible and the label will never
respond to any command again.
NXP Semiconductors
SL2S5002; SL2S5102
ICODE SLIX-L
•
Password protected Privacy Mode:
The 32-bit Privacy password enables a label to be set to the Privacy mode with the
ENABLE PRIVACY command. In this mode the label will not respond to any
command except the command GET RANDOM NUMBER, until it next receives the
correct Privacy password. This mode is especially designed to meet the increasing
demand to take care of the customers privacy.
•
Password protected EAS and AFI functionality:
The 32-bit EAS/AFI password enables the addressed label to be set in a mode where
the EAS status and the AFI value can only be changed if the correct EAS/AFI
password is transmitted to the label within the mentioned commands.
2. Features and benefits
2.1 ICODE SLIX-L RF interface (ISO/IEC 15693)
Contactless transmission of data and supply energy (no battery needed)
Operating distance: up to 1.5 m (depending on antenna geometry)
Operating frequency: 13.56 MHz (ISM, world-wide licence freely available)
Fast data transfer: up to 53 kbit/s
High data integrity: 16-bit CRC, framing
True anticollision
Electronic Article Surveillance (EAS)
Application Family Identifier (AFI) supported
Data Storage Format Identifier (DSFID)
ENABLE PRIVACY command with 32-bit Privacy password
DESTROY SLIX-L command with 32-bit Destroy password
Additional fast anticollision read
Write distance equal to read distance
2.2 EEPROM
512 bits, organized in 16 blocks of 4 bytes each, 4 blocks are summed up to 1 page
50 years data retention
Write endurance of 100000 cycles
2.3 Security
Unique identifier for each device
Lock mechanism for each user memory block (write protection)
Lock mechanism for DSFID, AFI, EAS
Password (32-bit) protected Label Destroy
Password (32-bit) protected Privacy Mode
Password (32-bit) protected EAS and AFI functionality
SL2S5002_SL2S5102
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.4 — 27 August 2012
193134
2 of 35
NXP Semiconductors
SL2S5002; SL2S5102
ICODE SLIX-L
3. Applications
Factory automation
Industrial and laundry
Asset management
Libraries and rental
4. Ordering information
Table 1.
Ordering information
Package
Name
SL2S5002FUD
SL2S5102FUD
SL2S5002FTB
wafer
wafer
XSON3
Description
sawn, bumped wafer, 120
m,
on film frame carrier,
C
i
between LA and LB = 23.5 pF (typical)
sawn, bumped wafer, 120
m,
on film frame carrier,
C
i
between LA and LB = 97 pF (typical)
-
-
Version
Type number
plastic extremely thin small outline package; no leads; SOT1122
3 terminals; body 1 x 1.45 x 0.5 mm
C
i
between LA and LB = 23.5 pF (typical)
5. Block diagram
ANALOG
RF INTERFACE
VREG
PAD
VDD
LA
RECT
DEMOD
data
in
DIGITAL CONTROL
EEPROM
ANTICOLLISION
READ/WRITE
CONTROL
ANTENNA
Cres
MOD
data
out
ACCESS CONTROL
MEMORY
EEPROM INTERFACE
CONTROL
CLK
PAD
Clock
LB
RF INTERFACE
CONTROL
R/W
SEQUENCER
CHARGE PUMP
001aam247
Fig 1.
Block diagram of ICODE SLIX-L
SL2S5002_SL2S5102
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.4 — 27 August 2012
193134
3 of 35
NXP Semiconductors
SL2S5002; SL2S5102
ICODE SLIX-L
6. Pinning information
SL2S5002
SL2S5102
LA
2
1
LB
3
n.c.
001aan362
Transparent top view
Fig 2.
Table 2.
Pin
1
2
3
Pin configuration for SOT1122
Pin description SOT1122
Symbol
LB
LA
n.c.
Description
antenna RF input
antenna RF input
not connected
SL2S5002_SL2S5102
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.4 — 27 August 2012
193134
4 of 35
NXP Semiconductors
SL2S5002; SL2S5102
ICODE SLIX-L
7. Wafer layout
LA
LB
GND
TEST
not to scale
001aam246
Fig 3.
Wafer SL2S5002FUD layout and pin configuration for the bare die
SL2S5002_SL2S5102
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.4 — 27 August 2012
193134
5 of 35
京公网安备 11010802033920号
EEWORLD
