Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 2.1 (02-07-13)
2
SMSC USB224x
PRODUCT PREVIEW
Ultra Fast USB 2.0 Multi-Format, SD/MMC, and MS Flash Media Controllers
Overview
The SMSC USB224x is a flash media card reader solution fully compliant with the USB 2.0
specification. All required resistors on the USB ports are integrated into the device. This includes all
series termination resistors on D+ and D– pins and all required pull-down and pull-up resistors. The
over-current sense inputs for the downstream facing ports have internal pull-up resistors.
Hardware Features
Single chip flash media controller in low pin count 36-pin QFN, lead-free RoHS compliant package
Commercial temperature products support 0°C to +70°C: USB2240/41, USB2242 and USB2244
Industrial temperature products support -40°C to +85°C: USB2240i/41i, USB2242i and USB2244i
Up to 8 GPIOs
— Configuration and polarity for special function use such as LED indicators, button inputs, and
power control to memory devices
— The number of actual GPIOs depends on the implementation configuration used
One GPIO available with up to 200 mA drive and “fold-back” short circuit protection
8051 8-bit microprocessor
— 60 MHz - single cycle execution
— 64 KB ROM |14 KB RAM
Supports a single external 3.3 V supply source; internal regulators provide 1.8 V internal core
voltage for additional bill of materials and power savings
Compliance with the following flash media card specifications:
Secure Digital 2.0
— HS-SD and SDHC
— TransFlash™ and reduced form factor media
MultiMediaCard 4.2
— 1/4/8 bit MMC
Memory Stick 1.43
Memory Stick Pro Format 1.02
Memory Stick Pro-HG Duo Format 1.01
— Memory Stick, MS Duo, HS-MS, MS Pro-HG, MS Pro
Memory Stick Duo 1.10
xD-Picture Card 1.2
Software Features
If the OEM is using an external EEPROM, the following features are available:
— Customizable vendor, product, language, and device ID’s
— 12-hex digits maximum for the serial number string
— 28-character manufacturer ID and product strings for the flash media reader/writer
— LED blink interval or duration
SMSC USB224x
3
Revision 2.1 (02-07-13)
PRODUCT PREVIEW
Ultra Fast USB 2.0 Multi-Format, SD/MMC, and MS Flash Media Controllers
Block Diagrams
USB2240 / 40i
USB2241 / 41i*
USB
Host
PHY
SIE
CTL
BUS
INTFC
AUTO_CBW
PROC
FMI
SD/
MMC
Multiplexed
Interface
BUS FMDU
INTFC CTL
MS
xD*
3.3 V
EP0 TX
EP0 RX
1.8 V Reg
VDD18
BUS
INTFC
RAM
EP1 RX
EP1 TX
EP2 RX
EP2 TX
4K
total
24 MHz
Crystal
PLL
VDD18PLL
XDATA BRIDGE
+ BUS ARBITER
3.3 V
1.8 V Reg
PWR_FET1
GPIOs
RAM
10 KB
ROM
64 KB
Clock
Generation and
Control
8051
PROCESSOR
SFR
RAM
GPIO10 / CRD_PWR
8 pins
ADDR
MAP
Program Memory I/O Bus
NOTE: xD-Picture Card is not applicable to USB2241/41i.
Figure 1 USB2240/40i/41/41i Block Diagram
Revision 2.1 (02-07-13)
4
SMSC USB224x
PRODUCT PREVIEW
Ultra Fast USB 2.0 Multi-Format, SD/MMC, and MS Flash Media Controllers
The main purpose is to update the PDA version and implement the program update in a local area network. That is, the PDA is connected to the PC (the PDA can access websites such as Baidu, but cannot a...
:loveliness: xingmiao moderator came to share with you an experience: [url=https://bbs.eeworld.com.cn/thread-94704-1-1.html]PLC I/O port input line improper selection causes IO damage[/url] Welcome! I...
There are two points A and B, 12 cm apart. If there is a spacer in between, a high (low) level is output, and if there is no spacer, a low (high) level is output.
What components are good to use, pref...
Low-power Qorvo chips enhance connectivity and reliability for new Luna smart home systemImagine a smart home system with modern thermostats, smart radiator valves, temperature/door/window sensors and...
As LEDs continue to improve in almost every aspect of performance and cost, LED lighting is being used in an increasingly wide range of applications, among which LED street lights are a focus of in...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
Editor's note: In order to help technicians or engineers who have knowledge of PIC microcontroller assembly language quickly master the method of using C language to program PIC microcontrollers, t...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
D5026A is a driver IC designed by Shanghai Debei Electronics for energy-saving LED display screens. Its design concept is energy-saving and compatible with existing solutions, that is, it can be ...[Details]
introduction
At present, measuring instruments are developing towards networking, and each individual embedded instrument will become a node on the Internet. This system realizes the network...[Details]
1 Development of LED Film and Television Lighting
1.1 The significance of developing film and television lighting
Lighting power consumption accounts for a large proportion of the total p...[Details]
Almost everyone in a student dormitory has a bedside lamp. But if you want to read for a while after turning off the lights and don't want to disturb your roommates' sleep, you may need a reading l...[Details]
The fluorescent lamps and energy-saving lamps we commonly use now have greatly improved luminous efficiency compared with the earlier ordinary incandescent lamps and have been widely used. With the...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems (GP...[Details]
Mobile phones, MP3s, tablet computers, laptops, digital cameras, handheld game consoles, navigation devices, etc., all these mobile devices are powered by mobile batteries, and the battery life is ...[Details]
1 Introduction
Fieldbus is a serial, digital, multi-point communication data bus between field equipment/instruments installed in the production process area and automatic control devices/syst...[Details]
1 Introduction
Lijia'an Yellow River Diversion Culvert is a large gravity diversion gate in the lower reaches of the Yellow River. The Yellow River Diversion Culvert is located in Lijia'an Vi...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
