Si530/Si531
10 MHz to 1.4 GHz Crystal Oscillator (XO) Series
Description
The Si530/531 XO utilizes Silicon Laboratories’ advanced
DSPLL circuitry to provide a low-jitter clock at high frequencies.
The Si530/531 is available with any-rate output frequency from
10 to 945 MHz and select frequencies to 1400 MHz. Unlike a
traditional XO, where a different crystal is required for each
output frequency, the Si530/531 uses one fixed-frequency
crystal to provide a wide range of output frequencies. This IC-
based approach allows the crystal resonator to provide
exceptional frequency stability and reliability. In addition, DSPLL
clock synthesis provides superior supply noise rejection,
simplifying the task of generating low-jitter clocks in noisy
environments typically found in communication systems. The
Si530/531 IC-based XO is factory-configurable for a wide
variety of user specifications including frequency, supply
voltage, output format, and temperature stability. Specific
configurations are factory-programmed at time of shipment,
thereby eliminating long lead times associated with custom
oscillators.
Features
Available with any-rate output frequencies from 10 to 945 MHz and
select frequencies to 1.4 GHz
Ultra-low jitter: 0.3 ps RMS (12 kHz–20 MHz)
3x tighter stability than SAW oscillators
3.3 V, 2.5 V and 1.8 V V
DD
supply operation
Differential (LVPECL, LVDS, CML) or CMOS output options
Standard frequencies in stock and available for rapid delivery
Custom frequencies available with < 2 week lead times
Applications
SONET/SDH/OTN
Networking
HD-SDI/3G-SDI Video
Test and measurement
Clock and data recovery
FPGA/ASIC Clock generation
Product Selector Guide
XO Series
Si530
Si531
Description
Single frequency oscillator, OE pin 2
Single frequency oscillator, OE pin 1
Pin-out
Pin
NC/OE 1
OE/NC 2
6
5
4
VDD
CLK-
CLK+
Pin Description
1
2
3
4
5
6
Description
Si530: NC = No Connect
Si531: OE = Output Enable
Si530: OE = Output Enable
Si531: OE = No Connect
GND = Ground
CLK+ = Clock output
CLK- = Complementary Clock output
VDD = Power Supply
A complete Si530-531 data sheet can be found here:
http://www.silabs.com/Support%20Documents/TechnicalDocs/si530.pdf
GND 3
(top view)
Selected Electrical Specifications
V
DD
= 2.5 or 3.3 V ±10%, T
A
= -40 to 85 ºC
Parameter
Frequency Range
1
Supply Voltage
Supply Current
Total Stability
Rise/Fall Time
Phase Jitter (RMS) for F
CLK
≥ 500 MHz
Phase Jitter (RMS) for F
CLK
of 125 to 500 MHz
Duty Cycle
Output Enable (OE)
3
LVPECL Output Option
4
LVDS Output Option
5
Notes:
1.
2.
3.
4.
5.
Symbol
F
CLK
V
DD
I
DD
F
STAB
T
R
/T
F
J
J
DC
V
IH
V
IL
V
OC
V
O
V
OC
V
O
Test Condition/Comment
LVPECL/LVDS
3.3 V option
2.5 V option
LVPECL (output enabled)
LVDS (output enabled)
Tristate (output disabled)
Temperature stability: ±7 ppm
LVPECL/LVDS option
12 kHz to 20 MHz integration BW
2
All formats
mid-level
swing (diff)
mid-level
swing (diff)
Typ
Max
—
945
3.3
3.63
2.5
2.75
111
121
90
98
60
75
—
20
—
350
0.25
0.40
0.36
0.50
45
—
55
0.75 x V
DD
—
—
—
—
0.5
V
DD
– 1.42 — V
DD
– 1.25
1.1
—
1.9
1.125
1.20
1.275
0.5
0.7
0.9
Min
10
2.97
2.25
—
—
—
-20
—
—
Unit
MHz
V
V
mA
mA
mA
ppm
ps
ps
ps
%
V
V
V
V
PP
V
V
PP
Also available in frequencies from 970 to 1134 MHz and 1213 to 1417 MHz.
All Crystal Oscillator (XO) devices are screened for jitter at production test.
OE pin includes a 17 kΩ pullup resistor to VDD.
50 Ω to VDD – 2.0 V.
R
term
= 100 Ω (differential).
Rev. 0.1 12/13
Copyright© 2013 by Silicon Labs
Si530/Si531 Crystal Oscillator (XO) Series
Si530/Si531
10 MHz to 1.4 GHz Crystal Oscillator (XO) Series
Absolute Maximum Ratings
1
Parameter
Symbol
Rating
Unit
Maximum Operating Temp.
T
AMAX
85
ºC
Storage Temperature
T
S
-55 to 125
ºC
Supply Voltage
V
DD
-0.5 to 3.8
ºC
Input Voltage
V
IN
0.5 to V
DD
+0.3
V
ESD HBM (JESD22-A114)
HBM
2.5
kV
Solder Temperature
2
T
PEAK
260
ºC
2
Solder Time at T
PEAK
T
P
20-40
sec
1. Stresses beyond those listed in this table may cause
permanent damage to the device. Functional operation
specification compliance is not implied at these conditions.
Exposure to maximum rating conditions for extended periods
may affect device reliability.
2. The device is compliant with JEDEC J-STD-020.
Environmental Compliance and Package Information
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Gross and Fine Leak
Resistance to Solder Heat
Moisture Sensitivity Level (MSL)
Contact Pads
Test Condition
MIL-STD-883, Method 2002
MIL-STD-883, Method 2007
MIL-STD-883, Method 2003
MIL-STD-883, Method 1014
MIL-STD-883, Method 2036
1
Gold over Nickel
Thermal Conditions
Parameter
Symbol
Thermal Impedance
JA
Test Condition
Still air
Value
84.6
Unit
ºC/W
Standard Frequency Orderable Part Numbers
Si530 5x7mm
3.3V LVPECL
3.3V LVDS
2.5V LVPECL
2.5V LVDS
106.25 MHz
530AC106M250DG
530BC106M250DG
530EC106M250DG
530FC106M250DG
125 MHz
530AC125M000DG
530BC125M000DG
530EC125M000DG
530FC125M000DG
148.3517 MHz
530AC000110DG
530BC000110DG
530EC000110DG
530FC000110DG
148.5 MHz
530AC148M500DG
530BC148M500DG
530EC148M500DG
530FC148M500DG
155.52 MHz
530AC155M520DG
530BC155M520DG
530EC155M520DG
530FC155M520DG
156.25 MHz
530AC156M250DG
530BC156M250DG
530EC156M250DG
530FC156M250DG
Si531 5x7mm
3.3V LVPECL
3.3V LVDS
2.5V LVPECL
2.5V LVDS
106.25 MHz
531AC106M250DG
531BC106M250DG
531EC106M250DG
531FC106M250DG
125 MHz
531AC125M000DG
531BC125M000DG
531EC125M000DG
531FC125M000DG
148.3517 MHz
531AC000110DG
531BC000110DG
531EC000110DG
531FC000110DG
148.5 MHz
531AC148M500DG
531BC148M500DG
531EC148M500DG
531FC148M500DG
155.52 MHz
531AC155M520DG
531BC155M520DG
531EC155M520DG
531FC155M520DG
156.25 MHz
531AC156M250DG
531BC156M250DG
531EC156M250DG
531FC156M250DG
Si530 5x7mm
3.3V LVPECL
3.3V LVDS
2.5V LVPECL
2.5V LVDS
187.5 MHz
530AC187M500DG
530BC187M500DG
530EC187M500DG
530FC187M500DG
200 MHz
530AC200M000DG
530BC200M000DG
530EC200M000DG
530FC200M000DG
250 MHz
530AC250M000DG
530BC250M000DG
530EC250M000DG
530FC250M000DG
311.04 MHz
530AC311M040DG
530BC311M040DG
530EC311M040DG
530FC311M040DG
312.5 MHz
530AC312M500DG
530BC312M500DG
530EC312M500DG
530FC312M500DG
622.08 MHz
530AC622M080DG
530BC622M080DG
530EC622M080DG
530FC622M080DG
Si531 5x7mm
3.3V LVPECL
3.3V LVDS
2.5V LVPECL
2.5V LVDS
187.5 MHz
531AC187M500DG
531BC187M500DG
531EC187M500DG
531FC187M500DG
200 MHz
531AC200M000DG
531BC200M000DG
531EC200M000DG
531FC200M000DG
250 MHz
531AC250M000DG
531BC250M000DG
531EC250M000DG
531FC250M000DG
311.04 MHz
531AC311M040DG
531BC311M040DG
531EC311M040DG
531FC311M040DG
312.5 MHz
531AC312M500DG
531BC312M500DG
531EC312M500DG
531FC312M500DG
622.08 MHz
531AC622M080DG
531BC622M080DG
531EC622M080DG
531FC622M080DG
For customized frequencies:
http://www.silabs.com/custom-timing
2
Rev. 0.1
Si530/Si531
10 MHz to 1.4 GHz Crystal Oscillator (XO) Series
CONTACT INFORMATION
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Please visit the Silicon Labs Technical Support web page:
https://www.silabs.com/support/pages/contacttechnicalsupport.aspx
and register to submit a technical support request.
Patent Notice
Silicon Labs invests in research and development to help our customers differentiate in the market with innovative low-power, small size,
analog-intensive mixed-signal solutions. Silicon Labs' extensive patent portfolio is a testament to our unique approach and world-class
engineering team.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from the
use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features or
parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
consequential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized application,
Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
Rev. 0.1
3
京公网安备 11010802033920号
EEWORLD
