To prevent damage to the components conformal coating, the leads should be adequately supported during the
forming process
H4P
Body Length (L) maximum:
Body Diameter (D) maximum:
Lead Diameter (d) maximum:
Lead Length (l) nominal:
Recommended Mounting Pitch:
Weight (g/100 resistors)
10.0 mm
3.70 mm
0.60 mm
30.0 mm
12.7 mm
40
H4
10.0 mm
3.70 mm
0.60 mm
30.0 mm
12.7 mm
40
H8
7.20 mm
2.50 mm
0.60 mm
30.0 mm
10.2 mm
24
Characteristics -
Long Term Stability
Long Term Stability
BS CECC 40101 004
Ratings at 70°C
H4 - 0.25 W
H8 - 0.125 W
Long Term Stability
BS CECC 40101 030
Ratings at 125°C
H4 - 0.125 W
H8 - 0.1 W
Long Term Stability
Commercial
Ratings at 125°C
H4P - 1W
H4 - 0.5 W
H8 - 0.25 W
Damp Heat Steady State
93% RH at 40°C
1773230 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Derating Graph -
Approved and Commercial Ratings
How to Order
H8
Common Part
H4P
H4
H8
100R
Resistance Value
1.0 ohm
(1000 milli ohms) 1R0
10 ohm
(10 ohms) 10R
100 ohm
(100 ohms) 100R
1K 0hm
(1000 ohms) 1K0
10K ohm
(10000 ohms) 10K
100K ohm
(100000 ohms) 100K
1M ohm
(1000000 ohms) 1M0
B
Tolerance
A - 0.05%
Y
T.C.R. Code
A - 5ppm
B - 10ppm
B
Release
A - Part can only
be sold with
Commercial or
C of C release.
B - Part can be
sold to BS CECC
40101 004,
BS CECC 40101
030
D - Part can
be sold to
BS CECC 40101
804
B - 0.1%
Y - 15ppm
C - 0.25%
D - 25ppm
D - 0.5%
C - 50ppm
F - 1.0%
Z - 100ppm
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
It’s my turn to ask questions today, so I’ll ask a question I asked during an interview at a public institution last week!I was the first person to be interviewed at that time, in the conference room ...
I am using GSM now and want to test the GSM function with the PC serial port. Why is there no display in the hyperterminal? I can't input any commands on the keyboard. The baud rate is set to 9600, th...
Contents: 1 Introduction to Digital Logic 1.1 Digital Circuits and Digital Signals 1.2 Number Systems 1.3 Arithmetic Operations on Binary Numbers 1.4 Binary Codes 1.5 Binary Logic Variables and Basic ...
For example, the instrument manual says the start bit is (02), so how do you determine that 2 is the start bit? ? What if there is also data 2 in the middle, for example, the data sent is: 222222222...
This article discusses how to wake up a touch-sensitive device such as a tablet without touching the device, using basic gesture recognition and novel proximity sensors. The article discusses the p...[Details]
In recent years, the market for mobile/portable devices such as smartphones and laptops has continued to grow rapidly. While these products continue to integrate more new features to enhance the ...[Details]
1. Introduction
Light control circuit plays a vital role in urban street lamps or corridor lighting. With light control circuit, the lights can be automatically turned on and off according to ...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
1 Introduction
PROFIBUS is an international, open, and manufacturer-independent fieldbus standard. It is widely used in manufacturing automation, process industry automation, and automatio...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
Since AC mains power may experience power outages, voltage sags and surges, continuous undervoltage and overvoltage, and frequency fluctuations during supply, these factors will affect the continuous ...[Details]
Introduction
In industrial control, speed measurement is often required. Generally, a contact tachometer is used. This tachometer must be placed against the center of the shaft to measure. It...[Details]
0 Introduction
Under normal circumstances, the three-phase power in the power system is symmetrical, and they meet certain amplitude and phase conditions; but when the load changes, the syst...[Details]
introduction
Steam turbines are driven by high-temperature and high-pressure steam generated by boilers to run at high speed. They are key power equipment in thermal power plants. The emergenc...[Details]
As the global LED market demand continues to increase, my country's LED industry will face huge opportunities in the future. However, the core LED technology and patents are basically monopolized b...[Details]
Against the backdrop of global warming, energy conservation and emission reduction have become a global hotspot and focus, which has also sounded the clarion call for the take-off of the LED lighti...[Details]
introduction
At present, the research on micron and nanotechnology is very active, which has led to the rapid development of microtechnology and micro-mechanical electronic system (MEMS) t...[Details]
Leakage current is generated by parasitic resistance paths between the measurement circuit and a nearby voltage source. This current can significantly reduce the accuracy of low current measurement...[Details]
Automotive Electronics
京公网安备 11010802033920号
EEWORLD
