BB202
Low-voltage variable capacitance diode
Rev. 02 — 3 January 2008
Product data sheet
IMPORTANT NOTICE
Dear customer,
As from October 1st, 2006 Philips Semiconductors has a new trade name
- NXP Semiconductors, which will be used in future data sheets together with new contact
details.
In data sheets where the previous Philips references remain, please use the new links as
shown below.
http://www.philips.semiconductors.com use http://www.nxp.com
http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com
(email)
The copyright notice at the bottom of each page (or elsewhere in the document,
depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved. -
If you have any questions related to the data sheet, please contact our nearest sales
office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your
cooperation and understanding,
NXP Semiconductors
NXP
Semiconductors
Product specification
Low-voltage variable capacitance diode
FEATURES
•
Very steep C/V curve
•
C0.2: 30.5 pF; C2.3: 9.5 pF
•
C0.2 to C2.3 ratio: min. 2.5
•
Very low series resistance
•
Ultra small SMD plastic package.
APPLICATIONS
•
Electronic tuning in FM radio
•
Voltage Controlled Oscillators (VCO).
DESCRIPTION
The BB202 is a variable capacitance diode, fabricated in
planar technology, and encapsulated in the SOD523 ultra
small SMD plastic package.
PINNING
MARKING
TYPE NUMBER
BB202
BB202
MARKING CODE
L2
PIN
1
2
The marking bar indicates the cathode.
Fig.1 Simplified outline (SOD523) and symbol.
MIN.
−
−
−
28.2
7.2
2.5
DESCRIPTION
cathode
anode
handbook, 2 columns
1
2
MBK441
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
V
R
I
F
T
stg
T
j
PARAMETER
continuous reverse voltage
continuous forward current
storage temperature
operating junction temperature
−
−
−55
−55
MIN.
6
10
+85
+85
MAX.
V
mA
°C
°C
UNIT
ELECTRICAL CHARACTERISTICS
T
j
= 25
°C
unless otherwise specified.
SYMBOL
I
R
PARAMETER
reverse current
CONDITIONS
V
R
= 6 V; see Fig.3
V
R
= 6 V; T
j
= 85
°C;
see
Fig 3
r
s
C
d
diode series resistance
diode capacitance
f = 100 MHz; C = 30 pF
V
R
= 0.2; f = 1 MHz;
see Fig.2 and Fig.4
V
R
= 2.3; f = 1 MHz;
see Fig.2 and Fig.4
C
d
(
0.2V
)
-------------------
-
C
d
(
2.3V
)
capacitance ratio
f = 1 MHz
TYP.
−
−
0.35
−
−
−
MAX.
10
100
0.6
33.5
11.2
−
UNIT
nA
nA
Ω
pF
pF
Rev. 02 - 3 January 2008
2 of 6
NXP Semiconductors
BB202
Low-voltage variable capacitance diode
Legal information
Data sheet status
Document status
[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
[1]
[2]
[3]
Product status
[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL
http://www.nxp.com.
Definitions
Draft —
The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet —
A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications —
Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values —
Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale —
NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at
http://www.nxp.com/profile/terms,
including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license —
Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Disclaimers
General —
Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes —
NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use —
NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Contact information
For additional information, please visit:
http://www.nxp.com
For sales office addresses, send an email to:
salesaddresses@nxp.com
Rev. 02 - 3 January 2008
5 of 6
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
