Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■
Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called
“TAIYO
YUDEN’ official sales channel”
s
).
It is only applicable to the products purchased from any of TAIYO YUDEN’ official sales channel.
s
■
Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■
Caution for export
Certain items in this catalog may require specific procedures for export according to
“Foreign
Exchange and For-
eign Trade Control Law”of Japan,
“U.S.
Export Administration Regulations” and other applicable regulations.
,
Should you have any question or inquiry on this matter, please contact our sales staff.
1
4
CYLINDER TYPE POLYACENE CAPACITORS
WAVE
■
FEATURES
◦
olyacene Capacitors can store a large number of ions into its
P
amorphous structure (doping), therefore Polyacene Capacitors has
much larger capacitance than conventional electric double layer
capacitors.
◦
uick-charge with ampere measure is possible with its Low internal
Q
resistance.
◦
o s s i b l e to c h a r g e /d i s c h a r g e m o r e t h a n 100,000 t i m e s w i t h
P
less deterioration caused by charging/discharging compared to
secondary battery which involves chemical reaction, and that enables
to more than 100,000 times charge/discharge and large excellence of
durability for over charge/discharge.
◦
olyacene Capacitors is environmentally friendly power source, which
P
does not contain any heavy metals such as Cd,Hg and Pb.
(RoHS compliant)
■
APPLICATIONS
◦
ack-up power source for CPU, microcomputer, and flash memory writing
B
when shutting off the power.
◦
oad change leveling (life lengthening of main power source such as
L
dry battery, Lithium primary battery)
◦
ower source storage combined with solar cell, fuel cell, generator,
P
and so on.
◦
ain power source for small devices
M
(Measuring equipments, toys and so on).
■
ORDERING CODE
P
PAS
A
❶
S
0
❷
8
1
❸
5
❸Dimensions/
L [mm]
15
15
16
16
20
20
35
35
40
40
L
❹
S
2
R
❺
5
1
0
❻
example
5
ENERGY DEVICES SUPER CAPACITORS
（
）
146
❶Type
Polyacene Capacitors
❷Dimensions/
φD
[mm]
08
8.0
10
10.0
12
12.5
18
18
❹Characteristic
Spec
LS
Low ESR type
LA High Capacitance type
❺Maximum
Usable
Voltage
〔V〕
2R3
2R5
3R0
2.3
2.5
3.0
※R=decimal
point
❻Nominal
Capacitance
〔F〕
105
∼
506
10×10
5
μF=1F
∼
50×10
6
μF=50F
■
EXTERNAL DIMENSIONS
Part Number
Low ESR type
(LS series)
PAS0815LS2R5105
PAS1016LS2R5205
PAS0815LA2R3185
PAS1020LA2R3475
Large Capacitance PAS1020LA3R0405
type (LA series) PAS1220LA3R0905
PAS1235LA3R0206
PAS1840LA3R0506
φD
8.0
10.0
8.0
10.0
10.0
12.5
12.5
18.0
L
15.0
16.0
15.0
20.0
20.0
20.0
35.0
40.0
φd
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
P
3.5
5.0
3.5
5.0
5.0
5.0
5.0
8.0
Unit : mm
＋
−
■
PART NUMBERS
Part Number
Low ESR type
(LS series)
PAS0815LS2R5105
PAS1016LS2R5205
PAS0815LA2R3185
PAS1020LA2R3475
PAS1020LA3R0405
PAS1220LA3R0905
PAS1235LA3R0206
PAS1840LA3R0506
Maximum Usable Voltage
(V)
2.5
2.3
Nominal Capacitance (F)
1
2
1.8
4.7
4
9
20
50
Internal Resistance (mΩ)
70
50
1000
300
300
200
100
70
Large Capacitance type
(LA series)
3.0
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
1
4
LS Series
■
SPECIFICATIONS
Part Number
PAS0815LS2R5105
－25½＋70
PAS1016LS2R5205
2.5
2.0±20%
Under 50
Operating Temp.
Range (℃)
Max. Usable
Voltage (V)
Initial Capacitance
Initial Internal
(F)
Resistance (mΩ)
1.0±20%
Under 70
Temperature Characteristics
Lowest temperature (－25℃)
Capacitance
: Over 70% of initial spec.
Internal Resistance : Within 4 times of initial spec.
Highest temperature (70℃)
Capacitance, Internal Resistance : Within initial spec.
LA Series
■
SPECIFICATIONS
Part Number
PAS0815LA2R3185
－25½＋60
PAS1020LA2R3475
PAS1020LA3R0405
PAS1220LA3R0905
PAS1235LA3R0206
PAS1840LA3R0506
2.3
4.7±20%
4.0±20%
9.0±20%
20±20%
50±20%
Under 300
Under 300
Under 200
Under 100
Under 70
Operating Temp.
Range (℃)
Max. Usable
Voltage (V)
Initial Capacitance
Initial Internal
(F)
Resistance (mΩ)
1.8±20%
Under 1000
Temperature Characteristics
Lowest temperature (－25℃)
Capacitance
: Over 70% of initial spec.
Internal Resistance : Within 4 times of initial spec.
Highest temperature (60℃)
Capacitance, Internal Resistance : Within initial spec.
Lowest temperature (－25℃)
Capacitance
: Over 70% of initial spec.
Internal Resistance : Within 4 times of initial spec.
Highest temperature (60℃)
Capacitance, Internal Resistance : Within initial spec.
－25½＋60
3.0
■
PACKAGING
①Minimum
Packing Unit (Plastic Bag)
Item
PAS0815
PAS1016
PAS1020
PAS1220
PAS1235
PAS1840
180
ENERGY DEVICES SUPER CAPACITORS
250
Minimum
Packing
Unit
200
200
100
100
50
10
Standard Inner
Packing Box
quantity
10bags
2000
10bags
2000
15bags
1500
10bags
1000
10bags
500
20bags
200
（
Standard Inner Packing Box
200mm(W)×330mm(L)×140mm(H)
■
RELIABILITY DATA
Specifications
LS Series
LA Series
1. Operating Temperature range
－25½＋70℃
－25½＋60℃
2. Max. Usable Voltage
2.5V
2.3V
3.0V
Capacitance
: Over 70% of initial spec.
3. Floating Charge Characteristics Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
Capacitance
: Over 70% of initial spec.
4. Charge/Discharge Cycle
Internal Resistance : Within 4 times of initial spec.
Characteristics
Appearance
: No noticeable abnormality
Capacitance
: Within initial spec.
5. Thermal Durability
Internal Resistance : Within initial spec.
Appearance
: No noticeable abnormality
Capacitance
: Within initial spec.
6. Humidity Durability
Internal Resistance : Within 4 times of initial spec.
Appearance
: No noticeable abnormality
No exterior abnormality observed :
7. Impact Durability
initial spec. values retained
No exterior abnormality observed :
8. Vibration Durability
initial spec. values retained
Items
9. Soldering
Capacitance
: Within initial spec.
Internal Resistance : Within initial spec.
Appearance
: No noticeable abnormality
Test Conditions, Remark
Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp.
and measure the floating charge characteristics after returning to normal tem-
perature and humidity.
Measure the charge/discharge cycle characteristics after 10000 charge/discharge
cycle at 25±5℃ with under mentioned charge/discharge cycle test condition for
each parts.
Leave the capacitor in an atmosphere of Max Operationg Temperature±2℃ and
ー25±2℃
consecutively for 96 hours each, and return to normal temperature and
humidity.
Temperature : 40±2℃, Humidity : 90½95%RH Leave the capacitor for 500 hours,
and return to normal temperature and humidity.
Accorging to JIS C 0041
Sine half wave A=294
Apply a sine wave vibration of 1.5mm amplitude and frequency 10½55Hz,
for 2 hours per each direction (X, Y and Z), total 6 hours.
Material
: Sn-3Ag-0.5Cu
Solder bath temperature : 260±5℃
Dipping time : 10±1 sec.
Dipping depth : 1.5½2mm from cell body
）
◦
Charge/Discharge Cycle Test Condition
Part Number
Charging Voltage (V)
Charging Time (s)
Max. Charging Current (A)
Discharging Current (A)
Cut off Voltage (V)
PAS0815
LS2R5105
2.5
10
1
1
1.5
PAS1016
LS2R5205
2.5
10
1
1
1.5
PAS0815
LA2R3185
2.3
10
1
1
1.5
PAS1020
LA2R3475
2.3
10
1
1
1.5
PAS1020
LA3R0405
3.0
30
2
0.5
1.5
PAS1220
LA3R0905
3.0
30
3
1
1.5
PAS1235
LA3R0206
3.0
30
5
1
1.5
PAS1840
LA3R0506
3.0
30
10
2
1.5
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
1
4
147
CYLINDER TYPE PAS CAPACITOR
■PACKAGING
①Minimum Packing Unit (Plastic Bag)
Item
PAS0815
PAS1016
PAS1020
PAS1220
PAS1235
PAS1840
Minimum Packing Unit
200
200
100
100
50
10
Standard Inner Packing Box quantity
10 bags
2000
10 bags
2000
15 bags
1500
10 bags
1000
10 bags
500
20 bags
200
Standard Inner Packing Box
200mm(W)×330mm(L)×140mm(H)
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_pas_cylinder_pack_e-E02R01
CYLINDER TYPE PAS CAPACITOR
■RELIABILITY
DATA
1. Operating Temperature range
Specified Value
LR Series
LA Series
－25½＋60℃
2. Max. Usable Voltage
LR Series
Specified Value
LA Series
2.3V
2.3V
3.0V
3. Floating Charge Characteristics
LR Series
Specified Value
Test Methods and
Remarks
LA Series
Capacitance
Internal Resistance
Appearance
: Over 70% of initial spec.
: Within 4 times of initial spec.
: No noticeable abnormality
Apply a max. usable voltage to capacitor for 1000 hours at max. operating temp.
and measure the floating charge characteristics after returning to normal temperature and humidity.
4. Charge/Discharge Cycle Characteristics
LR Series
Specified Value
LA Series
Capacitance
Internal Resistance
Appearance
: Over 70% of initial spec.
: Within 4 times of initial spec.
: No noticeable abnormality
Test Methods and
Remarks
Leave the capacitor in an atmosphere of 60℃±2℃ and －25±2℃ consecutively for 96 hours each, and return to normal temperature
and humidity.
Charge/Discharge Cycle Test Condition
PAS0815
PAS1016
PAS0815
PAS1020
PAS1220
PAS1235
Part Number
LR2R3105
LR2R3205
LA2R3185
LA2R3475
LA2R3106
LA2R3226
Charging Voltage (V)
2.3
2.3
2.3
2.3
2.3
2.3
Charging Time (s)
10
10
10
10
10
10
Max. Charging Current (A)
1
1
1
1
1
1
Discharging Current (A)
1
1
1
1
1
1
Cut off Voltage (V)
1.5
1.5
1.5
1.5
1.5
1.5
Part Number
Charging Voltage (V)
Charging Time (s)
Max. Charging Current (A)
Discharging Current (A)
Cut off Voltage (V)
PAS1840
LA2R3566
2.3
30
5
5
1.5
PAS1020
LA3R0405
3
30
2
0.5
1.5
PAS1220
LA3R0905
3
30
3
1
1.5
PAS1235
LA3R0206
3
30
5
1
1.5
PAS1840
LA3R0506
3
30
10
2
1.5
5. Thermal Durability
LR Series
Specified Value
Test Methods and
Remarks
LA Series
Capacitance
Internal Resistance
Appearance
: Within initial spec.
: Within initial spec.
: No noticeable abnormality
Leave the capacitor in an atmosphere of 60℃±2℃ and －25±2℃ consecutively for 96 hours each, and return to normal temperature
and humidity.
6. Humidity Durability
LR Series
Specified Value
Test Methods and
Remarks
LA Series
Capacitance
Internal Resistance
Appearance
: Within initial spec.
: Within 4 times of initial spec.
: No noticeable abnormality
Temperature : 40±2℃, Humidity : 90½95%RH Leave the capacitor for 500 hours, and return to normal temperature and humidity.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
[i=s]This post was last edited by LS_lpy on 2014-1-14 17:59[/i] Upper computer interfaceUpper computer UDP server C# code[code]using System; using System.Collections.Generic; using System.ComponentMod...
I have a small program that needs a function to return a value, but after returning the value, the function has to perform certain operations before it can exit, and I don't want to use global variabl...
The equipment in the factory is very old, and the software of the equipment itself is also relatively old. Now the hardware in the market is updated very quickly, but the software does not support the...
[b][color=#ff0000]1.通过MEMORY伪指令来指示存储空间[/color][/b]
MEMORY
{PAGE 0:/* Program Memory */[color=#ff0000]/* 程序存储空间 */[/color]/* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE1 for data allocation */PR...
As shown in the figure above, the input is 220V AC. After the rectifier bridge, the voltage across the 47uF capacitor is 318V, which is fine. The TNY277PN BP/M power supply is 5.80V, which is also fin...
[font=宋体]There are still 4 days left until 2017. EEWorld just gave me such a good event. It is really a good choice to summarize my 2016. [/font] [font=宋体]I changed my job in 2016. I started from soft...
If the ultimate form of a car is a silicon-based life form, then in
the field of
intelligent driving
, it has gradually taken on the appearance of a "veteran driver." In
the field of
the ...[Details]
While
the solid-state battery
industry is still engaged in a long technological marathon for
the "ultimate solution" for
electric vehicles
, some companies have begun looking for mor...[Details]
A line scan lens is an industrial lens used with line scan cameras. Its imaging principle is to capture the image of the workpiece using a linear sensor and then perform digital signal processing t...[Details]
Electric motors and internal combustion engines of the same power have similar torque levels. High power requires high torque, and torque determines a vehicle's acceleration speed, commonly known a...[Details]
Is pure electric vehicles a false proposition for long-distance driving? At least from my personal perspective, based on current technological and infrastructure standards, I believe so. Below, I'l...[Details]
Topics: Bring Your Own Device (BYOD) trends; the impact of using employees' own mobile devices to control access to work facilities and equipment on information security; and ways to securely imple...[Details]
On August 25th, SK Hynix announced that it has completed development and entered mass production of its 321-layer, 2Tb QLC NAND flash memory product. This achievement marks the world's first applic...[Details]
UPS stands for Uninterruptible Power Supply, which includes energy storage devices. It is mainly used to provide uninterruptible power supply for devices that require high power stability.
...[Details]
A multilevel inverter converts a DC signal into a multilevel staircase waveform. Instead of a straight positive-negative output waveform, the output waveform of a multilevel inverter alternates in ...[Details]
Coal mines typically contain gas and coal dust. When gas and coal dust reach a certain concentration, they can cause explosions. Electrical equipment generates arcs during normal operation or durin...[Details]
A patent disclosed by Ford proposes replacing traditional segmented side curtain airbags with integrated full-width side curtain airbags that span the side of the vehicle and can be deployed simult...[Details]
Bosch has released a new SoC series to support L2+ advanced driver assistance functions. The chip integrates high resolution and long-range detection capabilities, and has built-in support for neur...[Details]
With the advancement of science and technology and the promotion of green, energy-saving, and circular development, the demand for precise control and accurate measurement is increasing. In the pow...[Details]
At present, the most troubling thing about pure electric vehicles as new energy sources is not only the range anxiety, but also the disadvantage of long charging time. At present, ternary lithium b...[Details]
As the core of electric vehicles, batteries are concerned with vehicle use and maintenance. The operation of vehicles is guaranteed by the electricity generated by batteries. For batteries, battery...[Details]
ARM Technology
京公网安备 11010802033920号
EEWORLD
