Standard Resistance Range.........................................................................................................................................................200 to 100 K ohms
Total Resistance Tolerance.................................................................................................................................................................................±5 %
Absolute Minimum Resistance ...................................................................................................... 1 ohm or 0.1 % maximum (whichever is greater)
Noise ................................................................................................................................................................................. 100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Power Rating (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less)
+40 °C ..........................................................................................................................................................................................................2 watts
+125 °C ......................................................................................................................................................................................................... 0 watt
Resolution.............................................................................................................................................................. See recommended part numbers
Operating Temperature Range .......................................................................................................................................................-40 °C to +125 °C
Storage Temperature Range ..........................................................................................................................................................-55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range
Vibration ............................................................................................................................................................................................................. 15 G
Wiper Bounce .................................................................................................................................................................0.1 millisecond maximum
Shock.................................................................................................................................................................................................................. 50 G
Wiper Bounce .................................................................................................................................................................0.1 millisecond maximum
Load Life .....................................................................................................................................................................................1,000 hours, 2 watts
Total Resistance Shift .................................................................................................................................................................... ±2 % maximum
Rotational Life (No Load).................................................................................................................................................1,000,000 shaft revolutions
Total Resistance Shift .................................................................................................................................................................... ±5 % maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift .................................................................................................................................................................... ±2 % maximum
IP Rating
Sealed Versions (-3, -4, -7, and -8) .................................................................................................................................................................IP 65
Unsealed Versions (-1 -2, -5, and -6) ..............................................................................................................................................................IP 40
Shaft Runout.......................................................................................................................................................................0.13 mm (0.005 in.) T.I.R.
Lateral Runout ....................................................................................................................................................................0.20 mm (0.008 in.) T.I.R.
Shaft End Play ....................................................................................................................................................................0.25 mm (0.010 in.) T.I.R.
Shaft Radial Play ................................................................................................................................................................0.13 mm (0.005 in.) T.I.R.
Pilot Diameter Runout ........................................................................................................................................................0.08 mm (0.003 in.) T.I.R.
Backlash ............................................................................................................................................................................................. 1.0 ° maximum
Weight ........................................................................................................................................................................................ Approximately 19 G
Terminals ................................................................................................................................................................................ Solder lugs or PC pins
Soldering Condition
Manual Soldering............................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering .....................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max. for 5 seconds
Wash processes ....................................................................................................................................................................... Not recommended
Marking ......................Manufacturer’s name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Potentiometers) .......................................................................................................................................1 cup maximum
Hardware ............................................................................................. One lockwasher and one mounting nut is shipped with each potentiometer.
NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin.
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
2
Consult manufacturer for complete specification details for resistances below 1k ohms.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
Ro VE LEA
HS RS D
C ION FRE
OM S E
PL AR
IA E
NT
*
5.08 ± .38
(.200 ± .015)
1
2
5.08 ± .38
(.200 ± .015)
6.99 ± .38
(.275 ± .015)
10.31 +.00/-.10
(.406 +.000/-.004)
3
*SEE
NOTE
.76 ± .25
R
.030 ± .010
.81
(.032)
SHAFT DIA. (SEE
PART NUMBERS)
BUSHING DIA. (SEE
PART NUMBERS)
.81 ± .25
(.032 ± .010)
20.63 ± .81
(.812 ± .032)
3590 - Precision Potentiometer
Product Dimensions
18.59 ± .38
(.732 ± .015)
.25
(.010)
7.93
(.312)
5.08 ± .38
(.200 ± .015)
-1, -3, -5, -7 Configurations
-2, -4, -6, -8 Configurations
6.99 ± .38
5.08 (.275 ± .015)
± .38
5.08 ± .38
5.08 ± .38
10.31 +.00/-.10
(.200 ± .015)
(.200 ± .015)
(.200 ± .015)
5.08 ± .38
(.406 +.000/-.004)
6.99 ± .38
5.08 ± .38
12.2
15.54
3
*SEE
(.200 ± .015)
6.99 ± .38
(.275 ± .015)
.76 ± .25
1
NOTE
(.200 ± .015)
5.08 ± .38
(.480)
R
(.612)
5.08 ± .38
(.275 ± .015)
.030
10.31 +.00/-.10 ± .010
2
6.99 ± .38
10.31 + .00/- .13
R MAX.
(.200 ± .015)
(.200 ± .015)
(.406 +.000/-.004) .81
(.275 ± .015)
(.406+.000/-.005)
3
*SEE
10.31 + .00/- .13
3
(.032)
.76 ± .25
1
NOTE
BUSHING DIAMETER
1
11.81
R
(.406+.000/-.005)
*SEE
.030 ± .010
(SEE PART NUMBERS)
2
(.465)
NOTE
2
BUSHING DIAMETER
1
.81
3
.81
SHAFT DIA. (SEE
(SEE PART NUMBERS)
(.032)
(.032)
2
.25
12.70 ±0.25
PART NUMBERS)
DIA.
.81
(.010)
(.500 ± .010)
DIA.
22.22 ± .38
BUSHING DIA. (SEE
(.032)
MOUNTING SURFACE
PART NUMBERS)
SHAFT DIAMETER (.875 ±.015)
SHAFT DIA. (SEE
.81 ± .25 NUMBERS)
.25
5.08 ± .38
.25
(SEE PART NUMBERS)
PART
(.032 ± .010)
(.010)
7.93
(.010)
(.200 ± .015)
SHAFT DIAMETER
1.19
BUSHING DIA. (SEE
.25
(SEE PART NUMBERS)
(.312)
5.08 ± .38
PART NUMBERS)
(.047)
6.99 ± .38
7.92
*BUSHING THREAD SPECIFICATIONS:
20.63 ± .81
18.59 ± .38
(.010)
(.200 ± .015)
.81 ± .25
1.19
-1, -2, -3, -4 .... 3/8-32 UNF
(.275 ± .015)
(.312)
(.812 ± .032)
(.732 ± .015)
10.31 +
± .38
.13
(.032 ± .010)
7.93
(.047)
-5, -6, -7, -8 .... M9 x 0.75-7H
5.08
.00/-
20.62 ± .81
7.92
18.6 ± .4
(.406+.000/-.005)
(.312)
(.200 ± .015)
(.312)
(.812 ± .032)
(.732 ± .015)
20.63 ± .81
18.59 ± .38
5.08 ± .38
BUSHING DIAMETER
1
3
20.62 ± .81
18.6 ± .4 PART
6.99 ± .38
(.812 ± .032)
(.732 ± .015)
(.200 ± .015)
(SEE
NUMBERS)
2
(.812 ±
(.732 ± .015) .81
(.275 ± .015)
10.31 + .00/- .13
.032)
12.2
12.2
15.54
(.032)
(.48)
(.406+.000/-.005)
15.54
(.480)
BUSHING DIAMETER
(.612)
1
R MAX.
3
(.612)
(SEE PART
12.2
NUMBERS)
R MAX.
2
.81
(.48)
SHAFT DIAMETER
15.54
12.2
15.54
MAX.
.25
(SEE PART
R
NUMBERS)
(.032)
11.81
(.612)
(.480) 11.81
(.612)
(.010)
(.465)
1.19
(.465)
R MAX.
(.047)
SHAFT DIAMETER
11.81
7.92
12.70
PART NUMBERS)
22.22 ± .38
.25
12.70 ±0.25
(SEE
DIA.
DIA.
(.465)
DIA.
(.312)
11.81
(.500)
(.875 ±.015)
(.010)
(.500 ± .010)
DIA.
22.22 ± .38
1.19
(.465)
20.62 ± .81
18.6 ± .4
MOUNTING SURFACE
MOUNTING SURFACE
(.875 ±.015)
12.70
22.22 ± .38
7.92
(.812 ± .032)
DIA.
(.047)
(.732 ± .015)
DIA.
12.70 ±0.25
(.312)
(.500)
(.875
MOUNTING HOLE LOCATIONS
DIA.
RECOMMENDED PC BOARD
±.015)
(.500 ± .010)
DIA.
20.62 ± .81
18.6 ± .4
22.22 ± .38
MOUNTING SURFACE
HOLE DIAMETER
FMS
(.812 ± .032)
(.732 ± .015)
12.2
PC PIN
(.875 ±.015)
12.19 ± 0.51
MOUNTING SURFACE
Recommended PCB Layout
Terminal Styles
*BUSHING THREAD SPECIFICATIONS:
TERMINAL
2.08
RECOMMENDED PC BOARD MOUNTING HOLE LOCATIONS
(.480 ± .020)
(.48)
(.082)
-1, -2, -3, -4 .... 3/8-32 UNF
15.54
THICKNESS
CCW
CW
R MAX.
HOLE DIAMETER
“P” Terminal
1.63 ± 0.38
-6, -7, -8 .... M9 x 0.75-7H
Style
-5,
12.2
FMS
.305 ± .003
(.612)
2
1
3
PC PIN
2.08
12.19 ± 0.51
(.064 ± .015)
(.48)
(.012 ± .0001)
*BUSHING THREAD SPECIFICATIONS:
TERMINAL
15.54
(.082)
(.480 ± .020)
R MAX.
-1, -2, -3, -4 .... 3/8-32 UNF
CCW
CW
11.81
CW
THICKNESS
(.612)
1.63 ± 0.38
-5, -6, -7, -8 .... M9 x 0.75-7H
.305 ± .003
(.465)
2
1
3
5.08 5.08 6.99
(.064 ± .015)
11.81
(.012 ± .0001)
(.275)
(.200) (.200)
(.465)
12.70
CW
22.22 ± .38
3.30 ± 0.38
DIA.
DIA.
(.500) 5.08 6.99
(.875 ±.015)
TOLERANCES: EXCEPT WHERE NOTED
5.08
(.130 ± .015)
12.70
22.22 ± .38
.508
MOUNTING
.127
SURFACE
(.200)
DECIMALS: .XX
±.015)
DIA.
(.200) (.275)
(.500)
DIA.
(.875
± (.02), .XXX ± (.005)
3.30 ± 0.38
RECOMMENDED PC
FRACTIONS: ±1/64
HOLE LOCATIONS
MOUNTING SURFACE
BOARD MOUNTING
TOLERANCES: EXCEPT WHERE NOTED
(.130 ± .015)
Schematic
HOLE DIAMETER
DIMENSIONS: MM
PC BOARD MOUNTING HOLE LOCATIONS
RECOMMENDED
.508
.127
FMS
DECIMALS: .XX ±
.XXX ±
(IN.)
2.08
HOLE DIAMETER
(.005)
FMS
(.02),
(.082)
2.08
FRACTIONS: ±1/64
CCW
CW
(.082)
MM
CCW
CW
DIMENSIONS:
2
1
3
(IN.)
“S” Terminal Style
2
1
3
12.19 ± 0.51
CW
(.480 ± .020)
CW
5.08 5.08 6.99
2.54
5.08 5.08 6.99
(.200) (.200) (.275)
(.100) 12.19 ± 0.51
(.200) (.200) (.275)
(.480 ± .020)
3 PLCS.
SOLDER LUG
TOLERANCES: EXCEPT WHERE NOTED
TOLERANCES: EXCEPT WHERE NOTED
2.54
TERMINAL
.508
.127
.508
.127
DECIMALS: .XX ±
.XXX ±
0.86 (.100)
(.02),
DECIMALS: .XX ± (.02), .XXX ± (.005)
(.005)
SOLDER LUG
(.034) 3 PLCS.
FRACTIONS: ±1/64
FRACTIONS: ±1/64
TERMINAL
3 PLCS.
MM
MM
DIMENSIONS:
DIMENSIONS:
(IN.)
0.86
(IN.)
(.034)
3 PLCS.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
3590 - Precision Potentiometer
Recommended Part Numbers
(Printed Circuit)
3590P-2-102L
3590P-2-202L
3590P-2-502L
3590P-2-103L
3590P-2-203L
3590P-2-503L
3590P-2-104L
(Solder Lug)
3590S-2-102L
3590S-2-202L
3590S-2-502L
3590S-2-103L
3590S-2-203L
3590S-2-503L
3590S-2-104L
(Solder Lug)
3590S-1-102L
3590S-1-202L
3590S-1-502L
3590S-1-103L
3590S-1-203L
3590S-1-503L
3590S-1-104L
Resistance (Ω)
1,000
2,000
5,000
10,000
20,000
50,000
100,000
Resolution (%)
.029
.023
.025
.020
.019
.013
.009
BOLDFACE
LISTINGS ARE IN STOCK AND READILY AVAILABLE
THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY.
ROHS IDENTIFIER:
L = COMPLIANT
Panel Thickness Dimensions
(For Bushing Mount Only)
2.46 - 3.81
(.097 - .150)
Shaft & Bushing Configurations
(Bushing - DxL, Shaft - D):
(-1) Plastic Bushing (3/8 ” x 5/16 ”) and
Shaft (.2480 + .001, - .002)
PANEL
(-2) Metal Bushing (3/8 ” x 5/16 ”) and
Shaft (.2497 + .0000, - .0009)
(-3) Sealed, Plastic Bushing (3/8 ” x 5/16 ”) and
Shaft (.2480 + .001, - .002)
(-4) Sealed, Metal Bushing (3/8 ” x 5/16 ”) and
Shaft (.2497 + .0000, - .0009)
(-5) Metric, Plastic Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .076 mm)
(-6) Metric, Metal Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .023 mm)
HEX NUT
LOCKWASHER
POT
(-7) Metric, Sealed, Plastic Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .076 mm)
(-8) Metric, Sealed, Metal Bushing (9 mm x 7.94 mm) and
Shaft (6 mm + 0, - .023 mm)
10.44 ± .07
DIA.
(.411 ± .003)
R
7.42
(.292)
ADDITIONAL HOLE FOR
ANTI-ROTATION PIN
1.60 +.08/-.03
DIA.
(.063 +.003/-.001)
Anti-rotation pin hole is shown at six o'clock
position for reference only. The actual location is
determined by the customer's application. Refer
to the front view of the potentiometer to see the
location of the optional A/R pin.
Panel thickness and hole diameters are
recommended for best fit. However, customers
may adjust the dimensions to suit their specific
application.
DIMENSIONS:
MM
(INCHES)
TOLERANCES: ±
0.127
(.005)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
REV. 11/17
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns
®
products manufactured by or on behalf of Bourns, Inc. and
its affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns
®
products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that
such information is current and complete.
The characteristics and parameters of a Bourns
®
product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns
®
product in a user application may vary
from the data sheet characteristics and parameters due to a combination of the Bourns
®
product with other components in
the user’s application or due to the environment of the user application itself. Such characteristics and parameters also can
and do vary in different applications and actual performance may vary over time. Users should always verify actual performance
of the Bourns
®
product in their specific devices and applications, and make their own independent judgments about how
much additional test margin to design in to compensate for differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns
®
product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns
®
product to meet requirements of such industry standard or such particular qualification. Users
of Bourns
®
products are responsible for ensuring compliance with safety-related requirements and standards applicable to
their applications.
Bourns
®
products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining
applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property
or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on
a case-by-case basis, use of any Bourns
®
products in such unauthorized applications is at the user’s sole risk. Life-critical
applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent
classifications outside of the United States.
Bourns
®
standard products that are designed and tested for use in automotive applications will be described on the applicable
data sheets as compliant with the applicable AEC-Q standard. Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns
®
standard products in an automotive
application is not recommended, authorized or intended and will be at the user’s sole risk.
Bourns
®
standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns
®
standard products that are designed and tested for use in aircraft or space
applications will be described on the applicable data sheets as compliant with the RTCA DO-160 standard. Unless expressly
and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other
Bourns
®
standard product in an aircraft or space application is not recommended, authorized or intended and will be at the
user’s sole risk.
The use and level of testing applicable to Bourns
®
custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns
®
custom products are specially designed. Absent a written agreement between Bourns
and the user regarding the use and level of such testing, the provisions above applicable to Bourns
®
standard products shall
also apply to such Bourns
®
custom products.
Users shall not sell, transfer, export or re-export any Bourns
®
products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns
®
products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns
®
products, technology or technical data may not under any circumstance be exported or
re-exported to countries subject to international sanctions or embargoes, and Bourns
®
products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to
receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability arising out of the application or
use of any Bourns
®
standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential
or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose,
non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
Five Lectures on Microwaves
Antenna Principles Lin Shu, Harbin Institute of Technology
RF Circuit Basics
Electromagnetic fields and waves
Microwave Technology Basics
What is an antenna vibrator?
Zigbe...
[i=s]This post was last edited by qwqwqw2088 on 2018-12-19 14:40[/i] [size=4][b]Question: [color=#555555][font="]We are working on a solar power collection system and need an efficient active balancin...
I saw this on another forum. I'm looking to see if anyone in our forum needs it. I don't know much about this and don't know if the price is worth it.Model 214 PLC relay model 214 PLC transistor model...
[i=s]This post was last edited by Gen_X on 2021-5-14 08:42[/i]Sorry: Due to my lack of knowledge of typeset, the text is a bit long. Please see the attachment for the specific test report, which also ...
After a period of hard work, I finally finished this little thing. However, it is not ideal for several reasons:1. There is no Chinese character library. If it is used in an SD card, it will be very t...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
While
the solid-state battery
industry is still engaged in a long technological marathon for
the "ultimate solution" for
electric vehicles
, some companies have begun looking for mor...[Details]
How do you know if a machine is operating properly? The answer: by leveraging deep learning to detect anomalies in routine vibration data from industrial machines. Anomaly detection has many uses, ...[Details]
To enable real-time monitoring of home security and automatically dial a number for voice prompts or send text messages when an alarm occurs, a GPRS-based embedded telephone alarm system was design...[Details]
A parallel inverter consists of two thyristors (T1 and T2), a capacitor, a center-tapped transformer, and an inductor. The thyristors provide a current path, while the inductor L maintains a consta...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
In recent years, many people have switched to new energy vehicles, and this type of vehicle has indeed been highly sought after and is considered the future direction of automobile development, and...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
We are entering a new era where people are increasingly affordably equipped with more electronic gadgets. Electronics have become essential to our lives. For example, the average consumer now owns ...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
Recently, AstroBo Robot, a subsidiary of Chenxing Automation, launched a new mobile collaborative palletizing product. Leveraging an omnidirectional mobile chassis, an intelligent scheduling system...[Details]
introduction
As “energy conservation and emission reduction” has become an indicator of the National Economic Development Outline of the 11th Five-Year Plan, people’s awareness of green enviro...[Details]
In the scorching summer, electric fans are a must-have for cooling down people's homes. However, I believe most people have encountered this situation: the fan is plugged in, the switch is pressed,...[Details]
Learned the following information.
Customer product: industrial computer motherboard
Glue application area: CPU/BGA filling
Glue color requirements: black or t...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
