The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V,
5.0 V, 2.5 V, and 3.0 V band gap voltage references featuring high
accuracy, high stability, and low power consumption. The parts
are housed in tiny, 5-lead SC70 and TSOT packages, as well as
in 8-lead SOIC versions. The SOIC versions of the ADR01,
ADR02, and ADR03 are drop-in replacements
1
to the industry-
standard REF01, REF02, and REF03. The small footprint and
wide operating range make the ADR0x references ideally suited
for general-purpose and space-constrained applications.
With an external buffer and a simple resistor network, the
TEMP terminal can be used for temperature sensing and
approximation. A TRIM terminal is provided on the devices for
fine adjustment of the output voltage.
1
The ADR01, ADR02, ADR03, and ADR06 are compact, low
drift voltage references that provide an extremely stable output
voltage from a wide supply voltage range. They are available in
5-lead SC70 and TSOT packages, and 8-lead SOIC packages
with A, B, and C grade selections. All parts are specified over
the extended industrial (–40°C to +125°C) temperature range.
The ADR01, ADR02, ADR03, and ADR06 A grade in 8-lead
SOIC are qualified for automotive applications.
Table 1. Selection Guide
Part Number
ADR01
ADR02
ADR03
ADR06
Output Voltage
10.0 V
5.0 V
2.5 V
3.0 V
ADR01, ADR02, and ADR03 are component-level compatible with REF01, REF02, and REF03, respectively. No guarantees for system-level compatibility are implied.
SOIC versions of ADR01/ADR02/ADR03 are pin-to-pin compatible with 8-lead SOIC versions of REF01/REF02/REF03, respectively, with the additional temperature
monitoring function.
Rev. R
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Rev. R | Page 4 of 20
Data Sheet
ADR02 ELECTRICAL CHARACTERISTICS
ADR01/ADR02/ADR03/ADR06
V
IN
= 7.0 V to 36.0 V, V
IN
= 7.0 V to 26.0 V for ADR02WARZ, T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter
OUTPUT VOLTAGE
INITIAL ACCURACY
OUTPUT VOLTAGE
INITIAL ACCURACY
TEMPERATURE COEFFICIENT
Symbol
V
O
V
OERR
V
O
V
OERR
T
CVO
Conditions
A and C grades
A and C grades
B grade
B grade
A grade, 8-lead SOIC, –40°C < T
A
< +125°C
A grade, 5-lead TSOT, –40°C < T
A
< +125°C
A grade, 5-lead SC70, –40°C < T
A
< +125°C
A grade, 5-lead SC70, –55°C < T
A
< +125°C
B grade, 8-lead SOIC, –40°C < T
A
< +125°C
B grade, 5-lead TSOT, –40°C < T
A
< +125°C
B grade, 5-lead SC70, –40°C < T
A
< +125°C
C grade, 8-lead SOIC, –40°C < T
A
< +125°C
2
V
IN
= 7.0 V to 36.0 V, V
IN
= 7.0 V to 26.0 V for
ADR02WARZ, –40°C < T
A
< +125°C
V
IN
= 7.0 V to 36.0 V, –55°C < T
A
< +125°C
I
LOAD
= 0 mA to 10 mA, –40°C < T
A
< +125°C,
V
IN
= 10.0 V
I
LOAD
= 0 mA to 10 mA, –55°C < T
A
< +125°C,
V
IN
= 10.0 V
No load, –40°C < T
A
< +125°C
0.1 Hz to 10.0 Hz
1 kHz
1000 hours
–55°C < T
A
< +125°C
f
IN
= 10 kHz
7
7
40
45
0.65
10
230
4
50
70
80
–75
30
550
1.96
30
40
70
80
1
Min
4.995
Typ
5.000
Max
5.005
5
0.1
5.003
3
0.06
10
25
25
30
3
9
9
40
Unit
V
mV
%
V
mV
%
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
V
ppm/V
ppm/V
ppm/mA
ppm/mA
mA
µV p-p
nV/√Hz
µs
ppm
ppm
ppm
dB
mA
mV
mV/°C
4.997
5.000
3
1
10
DROPOUT VOLTAGE
LINE REGULATION
V
DO
∆V
O
/∆V
IN
LOAD REGULATION
∆V
O
/∆I
LOAD
QUIESCENT CURRENT
VOLTAGE NOISE
VOLTAGE NOISE DENSITY
TURN-ON SETTLING TIME
LONG-TERM STABILITY
1
OUTPUT VOLTAGE HYSTERESIS
RIPPLE REJECTION RATIO
SHORT CIRCUIT TO GND
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
Temperature Sensitivity
1
I
IN
e
N p-p
e
N
t
R
∆V
O
∆V
O_HYS
RRR
I
SC
V
TEMP
TCV
TEMP
The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
I wrote a program, but after inputting data, it is not correct. I hope you can give me some advice. The program description is as follows. The purpose of the program is to calculate the CRC32 code val...
Use TIMER for precise timing, select TIMER5 , use single pulse mode, count up, use TIMER5 update interrupt, the initialization function is as follows:In addition, you can set the following function to...
[p=30, 2, left][font=Microsoft yahei, 微软雅黑][color=#333333] As the world's second largest economy and the world's largest manufacturing country, my country has driven the logistics market to a booming ...
# HyperLynx High-speed Circuit Design and Simulation (Ten) Transmission Line (Microstrip Line and Stripline) Exploration##Introduction to High-speed Transmission Line###High-speed transmission lines i...
【Source: SMT Information Network】Abstract: With the increasing requirements of users for power electronics cooling effect, the previous method of attaching heat sinks to power packages is difficult to...
UHF and HF are both general technology categories, but each category has independent supporting protocols. HF is more consistent in the 13.56MHz frequency band, although there are many internation...[Details]
This article introduces a miniature home electrocardiograph. The instrument has powerful functions: display monitoring, storage, playback, printing, record management, power alarm, telephone or Intern...[Details]
Maximize instrument utilization and reduce
test times
Increasing the throughput of automated test systems can improve efficiency. Using off-the-shelf tools (COTS) such as multicore proc...[Details]
WiMax technology needs to demonstrate its advantages in specific application scenarios in order to gain market recognition, which requires application testing to measure system performance para...[Details]
In a Class D audio power amplifier, the preamplifier is a relatively important module. It is located at the front of the entire topology and completes the processing of the input signal source,...[Details]
Preface
In recent years, many compact portable electronic products have been developed, such as mobile phones, digital cameras, MP3, MP4, PDA, GPS and DVD, etc. They are not only small in size...[Details]
TMS320C62X is a new generation of high-performance fixed-point digital signal processor (
DSP
) chip
from Texas Instruments (
TI
). The software design problem based on
DSP
is to use...[Details]
Battery system architecture
For many years, nickel-cadmium batteries and later nickel-metal hydride battery technology have dominated the market. Lithium batteries have only entered ...[Details]
Abstract:
This paper introduces the excitation system designed for 3/3 phase double winding induction generator, which is composed of DSP and FPGA. The interface circuit of the control sys...[Details]
Billboards are information display terminals for the public, with a wide range of civil and commercial values. However, most of the information displayed on billboards is currently solidified in th...[Details]
Nowadays, video conferencing has become a situation where multiple manufacturers supply various high-definition products. The technology of high-definition products has greatly matured, the cost h...[Details]
FSK (Frequeney-Shift Keying) uses carriers of different frequencies to transmit digital signals. FSK signals have the advantages of strong anti-interference ability and long transmission distance, and...[Details]
Mesh network architecture and advantages
The Internet is a flat network. The routers that make up the Internet are on the same plane. The mesh network formed by multiple paths between ...[Details]
0 Introduction
Electric vehicles are high-tech products that integrate computer technology, communication technology, electronic technology, and new material technology. They have a complex ...[Details]
The teardown of the third-generation iPhone shows that the phone is more integrated and may cost less, in part because of the use of chips from Broadcom and Toshiba. One analyst joked that the "S" ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
