Description:
A
Listing #90P1
B
The
17270, 17271, 17272,
and
17273
Foot Grounders provide contact with the ESD
floor both under the foot’s sole as well as the heel area, providing a more continuous
and reliable path-to-ground. These foot grounders are easier to install than most foot
grounders and are designed for use on standard shoes. The snug, reliable fit can be
easily adjusted to fit the individual wearer. These foot grounders are made from non-marring
three layer high visibility yellow reversible static dissipative rubber with a black conductive inner
layer. The
17270, 17271, 17272,
and
17273
are all UL listed. It is a suitable ESD footwear
component in Flooring - Footwear System meeting ANSI/ESD S20.20 when used as the primary
grounding method. It meets <3.5 x 10E7 ohms per ANSI/ESD STM 97.1 Floor Materials and
Footwear-Resistance Measurement in Combination with a Person, and significantly under <100
volts tested per ANSI/ESD STM 97.2 - Floor Materials and Footwear Voltage Measurement in
Combination with a Person
Components:
A. 0.060" thick (± 0.005) non-marring, solid, three layer, rubber material. Three layers
consist of a yellow dissipative outer layer with a black conductive inner layer, and a yellow
dissipative outer layer. Will not mar floors or shoes with black marks.
B. 3/8” wide, 18” long blue nylon ribbon contains 8 electrically conductive carbon suffused
fibers, reversible, may be positioned on either side of foot.
listed. Lot coded for quality traceability.
Specifications
Tab to floor contact point: >7.5 X 10E5 and <1.0 X 10E7 ohms resistance when
measured per ESD SP9.2
Abrasion:
Hardness:
Tensile PSI (min):
Outer Layer
5000 cycles
65 Shore A
3000lbs.
Test Method
ASTM-D-3389 Method B
ASTM-D-2240
ASTM-D-412
Made in America
Unless noted, tolerances ± 1/4"
Item No.
17270
17271
17272
17273
Description
Small
Medium
Large
XLarge
Recommended
Shoe Size (Men)
6-7
7-9
9-12
13+
Recommended
Shoe Size (Women)
6-8
8-10
10-12
13+
U.S. Patent Number 5,786,977
Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure to
line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not reduce or
increase your risk of receiving electric shock when using or working on electrical equipment.
RoHS Compliance Statement
None of the following materials are intentionally added in manufacturing this product: lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers
(PBDE) as outlined in the Directive 2002/95/EC Article 4.1. See Desco Industries Inc. letter and limited
warranty on-line at
Desco.com.
Specifications and procedures subject to change without notice.
Full Coverage Non-Marring Foot Grounder
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449 FAX REQUEST (909) 627-7126
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DRAWING
NUMBER
17270
DATE:
June 2010
© 2010 DESCO INDUSTRIES INC.
Employee Owned
京公网安备 11010802033920号
EEWORLD
