5962-8762201EX datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > logic> logic> 5962-8762201EX

5962-8762201EX: DescriptionDecoder/Driver, AC Series, Inverted Output, CMOS, PDIP16, PLASTIC, DIP-16; Categorylogic logic; File Size103KB，18 Pages; ManufacturerGE Solid State

Download Datasheet Parametric View All

5962-8762201EX Overview

Decoder/Driver, AC Series, Inverted Output, CMOS, PDIP16, PLASTIC, DIP-16

5962-8762201EX Parametric

Parameter Name	Attribute value
Maker	GE Solid State
package instruction	PLASTIC, DIP-16
Reach Compliance Code	unknown
series	AC
JESD-30 code	R-PDIP-T16
length	20.13 mm
Number of functions	1
Number of terminals	16
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Output polarity	INVERTED
Package body material	PLASTIC/EPOXY
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Certification status	Not Qualified
Maximum seat height	5.33 mm
Maximum supply voltage (Vsup)	5.5 V
Minimum supply voltage (Vsup)	1.5 V
Nominal supply voltage (Vsup)	5 V
surface mount	NO
technology	CMOS
Temperature level	MILITARY
Terminal form	THROUGH-HOLE
Terminal pitch	2.54 mm
Terminal location	DUAL
width	7.62 mm
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Change in paragraph 1.3, 1.4, 4.3.1c and figure 3. Technical changes in table I.

Editorial changes throughout.

Add vendor CAGE F8859. Add device Class V criteria. Add delta limits, table III.

Add case outline X. Update boilerplate. Editorial changes throughout. – lgt

Change to the propagation delay time value,

test in table I. Update

to latest MIL-PRF-38535 requirements. - lgt

Add section 1.5, radiation features. Update the boilerplate to include radiation

hardness assured requirements. Editorial changes throughout. - LTG

DATE (YR-MO-DA)

88-11-30

00-10-23

01-01-30

APPROVED

D. R. Cool

Raymond Monnin

04-05-14

Charles F. Saffle

THE FRONT PAGE OF THIS DRAWING HAS BEEN REPLACED.

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Jeffery Tunstall

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

CHECKED BY

Ray Monnin

APPROVED BY

D. R. Cool

DRAWING APPROVAL DATE

87-08-12

REVISION LEVEL

SIZE

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216

http://www.dscc.dla.mil

MICROCIRCUIT, DIGITAL, ADVANCED

CMOS, 1-OF-8 DECODER/DEMULTIPLEXER,

MONOLITHIC SILICON

AMSC N/A

CAGE CODE

SHEET

67268

1 OF

5962-87622

DSCC FORM 2233

APR 97

5962-E283-04

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks

form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are

those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 -

MIL-STD-1835 -

Test Method Standard Microcircuits.

Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 -

MIL-HDBK-780 -

List of Standard Microcircuit Drawings.

Standard Microcircuit Drawings.

(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil or from

the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein.

Unless otherwise specified, the issues of these documents cited in the solicitation or contract.

ELECTRONIC INDUSTRIES ALLIANCE (EIA)

JEDEC Standard No. 20 - Standard for Description of 54/74ACXXXX and 54/74ACTXXXX Advanced High-Speed

CMOS Devices.

(Copies of these documents are available online at http://www.jedec.org or from Electronics Industries Alliance, 2500 Wilson

Boulevard, Arlington, VA, 22201-3834).

2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with

MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The

modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for

device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified

herein.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M.

3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-87622

SHEET

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.

3.2.3 Truth table. The truth table shall be as specified on figure 2.

3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3.

3.2.5 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 4.

3.2.6 Radiation exposure circuit. The radiation exposure circuit shall be maintained by the manufacturer under document

revision level control and shall be made available to the preparing or acquiring activity upon request.

3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the

electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full

case operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be

marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer

has the option of not marking the "5962-" on the device. For RHA product using this option, the RHA designator shall still be

marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be

in accordance with MIL-PRF-38535, appendix A.

3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in

MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.

3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535

listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of

compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see

6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this

drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-PRF-38535

and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.

3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or

for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.

3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2

herein) involving devices acquired to this drawing is required for any change that affects this drawing.

3.9 Verification and review for device class M. For device class M, DSCC, DSCC's agent, and the acquiring activity retain

the option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made

available onshore at the option of the reviewer.

3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in

microcircuit group number 39 (see MIL-PRF-38535, appendix A).

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-87622

SHEET

Recommended Resources

Set base coupled monostable circuit

Platinum resistance temperature sensor circuit

high voltage amplifier

Telephone ringtone automatic adjustment circuit diagram

Touch alarm circuit

USB to 232 circuit

Device packaging: ...; PowerAnts PCB Design

C programming frequently asked questions: This is a book that specifically answers common questions about C programming. The book covers a wide range of topics and is accompanied by a large number of vivid examples. C is an excellent language...; zhangkai0215 Electronics Design Contest

ActiveSync sync NandFlash: Dear experts: I have a relatively basic question, and I would like to ask for your advice! After installing Microsoft ActiveSync on the PC, and connecting the PC and WCE development board via USB, why...; 海洋dz Embedded System

Which serial port is used for burning Ubuntu?: A: Where can I find busybox? [/font][/color][/font][/color] [font=微软雅黑][color=#333333][font=微软雅黑][color=#006400]B: Enter the file system directory, find -name busybox*[/color][/font][/color][/font] [f...; 明远智睿Lan Integrated technical exchanges

Take apart the Xiaomi Mijia Air Conditioner Companion Pro to see the domestic chips inside: [i=s]This post was last edited by littleshrimp on 2021-6-21 19:30[/i]Xiaomi Mijia recently launched an Air Conditioner Companion Pro , which, compared with previous models, has added a Bluetooth gatew...; littleshrimp Domestic Chip Exchange

[Design Tools] Verilog keyboard source code keypad - with debounce function: ...; 8fu8 FPGA/CPLD

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components