DATASHEET
ISL43110, ISL43111
Low-Voltage, Single Supply, SPST, High Performance Analog Switches
The Intersil ISL43110 and ISL43111 are precision, high
performance analog switches that are fully specified for 3.3V,
5V, and 12V operation, and feature improved leakage, ICC and
switching time specifications.
Designed to operate from a single +2.4V to +12V supply, the low
supply current (1µA Max over-temperature and voltage ranges)
and low leakage currents (1nA) make these switches ideal for
battery powered applications.
Low r
ON
and fast switching speeds over a wide operating supply
range increase these devices usefulness in industrial
equipment, portable instruments, and as input signal
multiplexers for new generation, low supply voltage data
converters. Some of the smallest packages are available
alleviating board space limitations, and making Intersil’s newest
line of low-voltage switches an ideal solution.
The ISL43110 and ISL43111 are single-pole/single-throw
(SPST) switches, with the ISL43110 being normally open (NO),
and the ISL43111 being normally closed (NC).
Table 1
summarizes the performance of this family. For similar
performance ±5V supply versions, see the
ISL43112
and
ISL43113 data sheets.
TABLE 1. FEATURES AT A GLANCE
ISL43110
Number of Switches
Configuration
3.3V
r
ON
3.3V t
ON
/ t
OFF
5V
r
ON
5V t
ON
/t
OFF
12V
r
ON
12V t
ON
/t
OFF
Packages
1
NO
15Ω
55ns/28ns
11Ω
45ns/20ns
7Ω
37ns/21ns
ISL43111
1
NC
15Ω
55ns/28ns
11Ω
45ns/20ns
7Ω
37ns/21ns
FN6028
Rev 4.00
June 27, 2014
Features
• Fully specified at 3.3V, 5V, and 12V supplies
• Available in SOT-23 packaging
• Single supply operation . . . . . . . . . . . . . . . . . . . . . . +2.4V to +12V
• ON-Resistance (r
ON
max) . . . . . . . . . . . . . . . . . 20 (V+ = 5V)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 (V+ = 12V)
• r
ON
flatness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5
• Charge injection (max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10pC
• Low power consumption (P
D
max) . . . . . . . . . . . . . . . . . . . . .5µW
• Low leakage current (max at +85°C) . . 10nA (Off Leakage)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20nA (On Leakage)
• Fast switching action
- t
ON
(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80ns
- t
OFF
(max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50ns
• Minimum 2kV ESD protection per method 3015.7
• TTL, CMOS compatible
• Pb-free (RoHS compliant)
Applications
• Battery powered, handheld, and portable equipment
- Cellular/mobile phones, pagers
- Laptops, notebooks, palmtops, PDAs
• Communications systems
- Radios
- PBX, PABX
• Test equipment
- Logic and spectrum analyzers
- Portable meters, DVM, DMM
• Medical equipment
- Ultrasound, MRI, CAT SCAN
- Electrocardiograph, blood analyzer
• Heads-up displays
• Audio and video switching
• General purpose circuits
- +3V/+5V DACs and ADCs
- Sample and hold circuits
- Digital filters
- Operational amplifier gain switching networks
- High frequency analog switching
- High speed multiplexing
- Integrator reset circuits
8 Ld SOIC, 5 Ld SOT-23
Related Literature
• Tech Brief
TB363
“Guidelines for Handling and Processing
Moisture Sensitive Surface Mount Devices (SMDs)”
FN6028 Rev 4.00
June 27, 2014
Page 1 of 12
ISL43110, ISL43111
Ordering Information
PART NUMBER
(Notes
2, 3,
)
ISL43110IBZ
ISL43110IBZ-T (Note
1)
ISL43110IHZ-T (Note
1)
ISL43111IBZ
ISL43111IBZ-T (Note
1)
ISL43111IHZ-T (Note
1)
NOTES:
1. Please refer to
TB347
for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see product information page for
ISL43110, ISL43111.
For more information on MSL, please see tech
brief
TB363
4. The part marking is located on the bottom of the part.
PART
MARKING
ISL431 10IBZ
ISL431 10IBZ
110Z (Note
4)
ISL431 11IBZ
ISL431 11IBZ
111Z (Note
4)
TEMP RANGE
(°C)
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
PACKAGE
(Pb-free)
8 Ld SOIC
8 Ld SOIC
5 Ld SOT-23
8 Ld SOIC
8 Ld SOIC
5 Ld SOT-23
M8.15
M8.15
P5.064
M8.15
M8.15
P5.064
PKG.
DWG. #
Pin Configurations
ISL43110
(8 LD SOIC)
TOP VIEW
COM 1
N.C.
N.C.
V+
2
3
4
(Note
5)
ISL43110
(5 LD SOT-23)
TOP VIEW
8 NO
7 GND
6 IN
5 N.C.
COM 1
NO
2
4 IN
5 V+
GND 3
ISL43111
(8 LD SOIC)
TOP VIEW
COM 1
N.C.
N.C.
V+
2
3
4
8 NC
7 GND
6 IN
5 N.C.
COM 1
NC
2
ISL43111
(5 LD SOT-23)
TOP VIEW
5 V+
GND 3
4 IN
NOTE:
5. Switches Shown for Logic “0” Input.
Pin Descriptions
PIN#
V+
GND
IN
COM
NO
NC
N.C.
Ground Connection
Digital Control Input
Analog Switch Common Pin
Analog Switch Normally Open Pin
Analog Switch Normally Closed Pin
No Internal Connection
FUNCTION
System Power Supply Input (+2.4V to +12V)
Truth Table
LOGIC
0
1
ISL43110
OFF
ON
ISL43111
ON
OFF
NOTE: Logic “0”
0.8V. Logic “1”
2.4V.
FN6028 Rev 4.00
June 27, 2014
Page 2 of 12
ISL43110, ISL43111
Absolute Maximum Ratings
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 15V
Input Voltages
IN (Note
6)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
NO, NC (Note
6).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
Output Voltages
COM (Note
6).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . .
20mA
Peak Current NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max). . . . . . . . . . . . . . . . . . . . . . . . . . .
30mA
ESD Rating (Per MIL-STD-883 Method 3015) . . . . . . . . . . . . . . . . . . . . >2kV
Thermal Information
Thermal Resistance (Typical,
Note 7)
JA
°C/W)
5 Ld SOT-23 Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
8 Ld SOIC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C
Maximum Storage Temperature Range. . . . . . . . . . . . . . . . . -65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see
TB493
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
6. Signals on NO, NC, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum current ratings.
7.
JA
is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief
TB379
for details.
Electrical Specifications (5V Supply)
Test Conditions:
Otherwise Specified.
PARAMETER
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, V
ANALOG
ON-Resistance,
r
ON
TEST CONDITIONS
V+ = +4.5V to +5.5V, GND = 0V, V
INH
= 2.4V, V
INL
= 0.8V (Note
9),
Unless
TEMP
(°C)
MIN
(Notes
8, 10)
MAX
(Notes
8, 10)
UNIT
S
TYP
Full
V+ = 4.5V, I
COM
= 1.0mA, V
COM
= 3.5V,
(Figure
4)
I
COM
= 1.0mA, V
COM
= 1V, 2V, 3V
25
Full
25
Full
0
11
15
1.5
2.5
-1
-10
-1
-10
-1
-20
0.01
0.01
0.01
V+
20
25
3
5
1
10
1
10
1
20
V
nA
nA
nA
nA
nA
nA
r
ON
Flatness, R
FLAT(ON)
NO or NC OFF Leakage Current,
I
NO(OFF)
or I
NC(OFF)
V+ = 5.5V, V
COM
= 1V, 4.5V, V
NO
or V
NC
= 4.5V, 1V,
(Note
11)
25
Full
25
Full
25
Full
COM OFF Leakage Current, I
COM(OFF)
V+ = 5.5V, V
COM
= 4.5V, 1V, V
NO
or V
NC
= 1V, 4.5V,
(Note
11)
COM ON Leakage Current, I
COM(ON)
V = 5.5V, V
COM
= 1V, 4.5V, or V
NO
or V
NC
= 1V, 4.5V,
(Note
11)
DIGITAL INPUT CHARACTERISTICS
Input Voltage High, V
INH
Input Voltage Low, V
INL
Input Current, I
INH
, I
INL
DYNAMIC CHARACTERISTICS
Turn-ON Time, t
ON
V
NO
or V
NC
= 3V, R
L
= 300, C
L
= 35pF,
V
IN
= 0 to 3V, (Figure
1)
V
NO
or V
NC
= 3V, R
L
= 300, C
L
= 35pF,
V
IN
= 0 to 3V, (Figure
1)
C
L
= 1.0nF, V
G
= 0V, R
G
= 0, (Figure
2)
R
L
= 50, C
L
= 15pF, f = 100kHz, (Figure
3)
25
Full
25
Full
25
25
45
50
20
28
2
>90
80
120
50
75
10
ns
ns
ns
ns
pC
dB
V+ = 5.5V, V
IN
= 0V or V+
Full
Full
Full
-1
2.4
0.8
1
V
V
µA
Turn-OFF Time, t
OFF
Charge Injection, Q
OFF-Isolation
FN6028 Rev 4.00
June 27, 2014
Page 3 of 12
ISL43110, ISL43111
Electrical Specifications (5V Supply)
Test Conditions:
Otherwise Specified. (Continued)
PARAMETER
Power Supply Rejection Ratio
NO or NC OFF Capacitance, C
OFF
COM OFF Capacitance, C
COM(OFF)
COM ON Capacitance, C
COM(ON)
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
TEST CONDITIONS
R
L
= 50, C
L
= 5pF, f = 1MHz
V+ = +4.5V to +5.5V, GND = 0V, V
INH
= 2.4V, V
INL
= 0.8V (Note
9),
Unless
TEMP
(°C)
25
25
25
25
MIN
(Notes
8, 10)
MAX
(Notes
8, 10)
UNIT
S
dB
pF
pF
pF
TYP
60
15
15
40
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V, (Figure
5)
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V, (Figure
5)
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V, (Figure
5)
V+ = 5.5V, V
IN
= 0V or V+, Switch On or Off
Full
-1
1
µA
Electrical Specifications (12V Supply)
Test Conditions:
Otherwise Specified.
PARAMETER
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, V
ANALOG
ON-Resistance,
r
ON
V+ = 10.8V, I
COM
= 1.0mA, V
COM
= 10V
I
COM
= 1.0mA, V
COM
= 3V, 6V, 9V
TEST CONDITIONS
V+ = +10.8V to +13V, GND = 0V, V
INH
= 4V, V
INL
= 0.8V (Note
9),
Unless
TEMP
(°C)
Full
25
Full
25
Full
25
Full
25
Full
25
Full
Full
Full
-1
-10
-1
-10
-1
-20
4
0.8
-1
37
42
21
26
8
>90
67
15
15
40
-1
1
1
80
120
50
75
20
MIN
(Notes
8, 10
0
7
8
1
1.5
MAX
(Notes
8, 10)
UNITS
V+
10
15
3
5
1
10
1
10
1
20
V
nA
nA
nA
nA
nA
nA
V
V
µA
ns
ns
ns
ns
pC
dB
dB
pF
pF
pF
µA
TYP
r
ON
Flatness, R
FLAT(ON)
NO or NC OFF Leakage Current,
I
NO(OFF)
or I
NC(OFF)
V+ = 13V, V
COM
= 1V, 10V, V
NO
or V
NC
= 10V, 1V,
(Note
11)
COM OFF Leakage Current, I
COM(OFF)
V+ = 13V, V
COM
= 10V, 1V, V
NO
or V
NC
= 1V, 10V,
(Note
11)
COM ON Leakage Current, I
COM(ON)
DIGITAL INPUT CHARACTERISTICS
Input Voltage High, V
INH
Input Voltage Low, V
INL
Input Current, I
INH
, I
INL
DYNAMIC CHARACTERISTICS
Turn-ON Time, t
ON
Turn-OFF Time, t
OFF
Charge Injection, Q
OFF Isolation
Power Supply Rejection Ratio
NO or NC OFF Capacitance, C
OFF
COM OFF Capacitance, C
COM(OFF)
COM ON Capacitance, C
COM(ON)
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
V+ = 13V, V
IN
= 0V or V+, Switch On or Off
V
NO
or V
NC
= 10V, R
L
= 300, C
L
= 35pF
V
NO
or V
NC
= 10V, R
L
= 300, C
L
= 35pF
C
L
= 1.0nF, V
G
= 0V, R
G
= 0
R
L
= 50, C
L
= 15pF, f = 100kHz
R
L
= 50, C
L
= 5pF, f = 1MHz
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V
V+ = 13V, V
IN
= 0V or V+
V = 13V, V
COM
= 1V, 10V, or V
NO
or V
NC
= 1V, 10V,
(Note
11)
Full
25
Full
25
Full
25
25
25
25
25
25
Full
FN6028 Rev 4.00
June 27, 2014
Page 4 of 12
ISL43110, ISL43111
Electrical Specifications (3.3V Supply)
Test Conditions:
Otherwise Specified.
PARAMETER
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, V
ANALOG
ON-Resistance,
r
ON
V+ = 3V, I
COM
= 1.0mA, V
COM
= 1.5V
I
COM
= 1.0mA, V
COM
= 0.5V, 1V, 1.5V
TEST CONDITIONS
V+ = +3.0V to +3.6V, GND = 0V, V
INH
= 2.4V, V
INL
= 0.8V (Note
9),
Unless
TEMP
MIN
(°C) (Notes
8, 10)
Full
25
Full
25
Full
25
Full
25
Full
25
Full
Full
Full
-1
-10
-1
-10
-1
-20
2.4
0.8
-1
55
70
28
35
2
>90
58
15
15
40
-1
1
1
100
150
60
85
10
0
15
18
3
4
MAX
(Notes
8, 10)
V+
30
40
5.5
7
1
10
1
10
1
20
TYP
UNITS
V
nA
nA
nA
nA
nA
nA
V
V
µA
ns
ns
ns
ns
pC
dB
dB
pF
pF
pF
µA
r
ON
Flatness, R
FLAT(ON)
NO or NC OFF Leakage Current,
I
NO(OFF)
or I
NC(OFF)
V+ = 3.6V, V
COM
= 1V, 3V, V
NO
or V
NC
= 3V, 1V, (Note
11)
COM OFF Leakage Current, I
COM(OFF)
V+ = 3.6V, V
COM
= 3V, 1V, V
NO
or V
NC
= 1V, 3V, (Note
11)
COM ON Leakage Current, I
COM(ON)
DIGITAL INPUT CHARACTERISTICS
Input Voltage High, V
INH
Input Voltage Low, V
INL
Input Current, I
INH
, I
INL
DYNAMIC CHARACTERISTICS
Turn-ON Time, t
ON
Turn-OFF Time, t
OFF
Charge Injection, Q
OFF Isolation
Power Supply Rejection Ratio
NO or NC OFF Capacitance, C
OFF
COM OFF Capacitance, C
COM(OFF)
COM ON Capacitance, C
COM(ON)
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
NOTES:
V+ = 3.6V, V
IN
= 0V or V+, Switch On or Off
V
NO
or V
NC
= 1.5V, R
L
= 300, C
L
= 35pF,
V
IN
= 0 to 3V
V
NO
or V
NC
= 1.5V, R
L
= 300, C
L
= 35pF,
V
IN
= 0 to 3V
C
L
= 1.0nF, V
G
= 0V, R
G
= 0
R
L
= 50, C
L
= 15pF, f = 100kHz
R
L
= 50, C
L
= 5pF, f = 1MHz
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V
f = 1MHz, V
NO
or V
NC
= V
COM
= 0V
V+ = 3.6V, V
IN
= 0V or V+
V = 3.6V, V
COM
= 1V, 3V, or V
NO
or V
NC
= 1V, 3V, or
floating, (Note
11)
Full
25
Full
25
Full
25
25
25
25
25
25
Full
8. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
9. V
IN
= input voltage to perform proper function.
10. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
11. Leakage parameter is 100% tested at high temp, and guaranteed by correlation at +25°C.
FN6028 Rev 4.00
June 27, 2014
Page 5 of 12
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
