• Glass sealed package assures high reliability and high temperature operation
• Tight tolerance and stability available
• Suitable for RoHS compliant re ow
• Low cost glass sealed crystal solution
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
Moisture Sensitivity Level (MSL) –This product is Hermetically Sealed and not Moisture Sensitive -MSL = N/A: Not Applicable
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
• Microprocessor crystals
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
8.000
8.000
Operation mode
40.001
40.001
Operating Temperature
Storage Temperature
Frequency Tolerance@ +25°C
Frequency Stability over the Operating
Temperatu ( ref. to +25°C)
re
Equivalent series resistance
-10
-40
-50
-50
-----
-----
-----
-----
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging @ 25°C±3°C
Insulation Resistance
-----
-----
-----
-----
500
Typical
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
18
10
-----
-----
Maximum
100.000
40.000
100.000
60.000
+60
+85
+50
+50
ºC
ºC
ppm
ppm
MHz
Units
Notes
Fundamental
Fundamental AT-
cut (Standard)
3
rd
OT AT -cut
(Standard)
Fundamental AT-
cut (See options)
See options
See options
See options
8.000 – 10.000MHz
(Fundamental)
10.001 – 15.999MHz
(Fundamental)
16.000 – 60.000MHz
(Fundamental)
40.000 – 100.000MHz
(3
rd
OT)
100
60
50
70
7
-----
100
±5
-----
pF
pF
µW
ppm
MΩ
Ω
-----
See options
First year
@ 100Vdc
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
ABM 2-
Frequency in MHz
e.g. 8.000MHz
14.31818MHz
26.000MHz
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
MHz -
-
-
-
-
Packaging
Blank: Bulk
T : 1k reel
T2 : 250pcs/reel
Mode
F: Fund AT for >40MHz
Load Capacitance (pF)
Please specify CL in pF
(8 to 33pF) or S for series
Please contact ABRACON for
other values
Custom ESR if other
than standard
R
: Specify a value in Ω
(e.g.: R4 0)
Operating Temp.
(See Table 1 for details)
E : 0°C ~ + 70°C
B : -20°C ~ +70°C
C: -30°C ~ + 70°C
N: -30°C ~ + 85°C
D: -40°C ~ +85°C
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
(See Table 1 for details)
U: ±10 ppm
G: ±15 ppm
X : ±20 ppm
W: ±25 ppm
Y : ±30 ppm
H: ±35 ppm
A : ±80 ppm
Q: ±100 ppm
V : ±120 ppm
P: ±150 ppm
Note: See Table 1 for the availability of Operating Temp. and Freq. Stability combination
Table 1 Available Combinations of Operating Temp. and Freq. Stability
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
U:±10ppm
√
G:±15ppm
√
√
√
X:±20ppm
√
√
√
W:±25ppm
√
√
√
√
Y:±30ppm
√
√
√
√
√
√*
H:±35ppm
√
√
√
√
√
√*
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
Std:±50ppm
√
√
√
√
√
√*
A:±80ppm
√
√
√
√
√
√
Q:±100ppm
√
√
√
√
√
√
V:±120ppm
√
√
√
√
√
√
P:±150ppm
√
√
√
√
√
√
Note: *: Availability depends on frequency.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
LLC
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OUTLINE DIMENSION:
0.062±.019
(1.6 ±0.20)
Note: Due to the availability of raw materials, the chamfer may not appear on the both pads. Be advised that this does
not affect the electrical characteristics of the crystal in any way.
Dimensions: inches (mm)
REFLOW PROFILE:
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
TAPE & REEL:
T: 1000pcs/reel
T2: 250pcs/reel
Dimensions: mm
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Are you still squeezing toothpaste manually every day? The amount of toothpaste squeezed out is either too much or too little each time? When the toothpaste is almost used up, the toothpaste in the to...
According to the circuit below, I want to connect a 9V directly to Vbus in my system. Will this chip output normally and charge the battery?
Do I need to give specific signals to the D+ and D- signals...
I developed a DLL, and then wrote an application to call this DLL. I know for sure that this application is correct. But there is a problem with the DLL. In my DLL project, I set the deploy device opt...
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
summary
This article will briefly analyze the success and shortcomings of high-frequency DC-DC switching power supplies in the process of miniaturization (the second basic goal), and propose m...[Details]
The capacity of a battery depends on the amount of charge and discharge, in addition to some factors of the battery itself. Obviously, if the charge and discharge of the battery can be recorded all...[Details]
As a new type of centralized and decentralized elevator control system, serial communication has been widely used in China. Compared with the previous centralized and unified control system, each s...[Details]
Some people think: as long as the program runs well, it doesn't matter how the original program is written. But this is absolutely not the case. Software is not completed in one go, and it is neces...[Details]
Stepper motors, also called steppers, use the principles of electromagnetism to convert electrical energy into mechanical energy and have been used since the 1920s. With the increasing popularity o...[Details]
Current sensing in automotive applications includes controlling the current through solenoids and injectors. For example, during diesel injection, we rapidly increase the current to the induction i...[Details]
1 Causes of problems with electric vehicle batteries
1.1 Caused by the battery itself
Why do we say that? In the previous issue, we learned about the working princi...[Details]
Lithium iron phosphate batteries are used as lithium-ion secondary batteries. Their main application is now in power batteries, which have great advantages over NI-H and Ni-Cd batteries.
Lithi...[Details]
With the continuous development of integrated circuit technology, integrated circuits have developed from thousands of gates to the current level of millions and tens of millions of gates. The applica...[Details]
Reliability and real-time performance are the basic requirements for control systems. Initially, motor control used analog circuits with discrete components. With the advancement of electronic tech...[Details]
The Challenge:
Improving Siemens Wind
Turbine Controls
System software automated testing for regular releases, validating wind turbine control system components during the developme...[Details]
1 Introduction
The early stage control system used relay control. Due to the large number of stage equipment, the number of control elements is huge and the wiring is complicated. Therefore, th...[Details]
At present, products in the field of monitoring generally focus on the field level, that is, the client/server (C/S) model is adopted, the purpose of which is to ensure the stability and reliability o...[Details]