PanView iQ
™
(PViQ
™
) Interconnect
Patch Cords – Enhanced
specifications
Category 6A/Class E
A
UTP interconnect patch cords shall be
constructed of 23 AWG stranded copper cable with a PViQ
™
Patch
Panel Plug on one end and a LED switch modular plug on the other
end. Copper conductors in patch cable shall be twisted in pairs and
separated by a quadrant separator. All four pairs shall be surrounded
by MaTriX tape. An additional 26 AWG conductor pair shall
surround the MaTriX tape to connect the LED switch plug to 9th
and 10th contacts on the PViQ
™
Patch Panel Plug. A flame
retardant jacket will cover all conductors. The MaTriX tape shall
suppress alien crosstalk and allow 10 Gb/s transmission. Patch
cords shall be used in conjunction with intelligent patch panels
and exclusively for interconnect architectures.
S P E C I F I C AT I O N S H E E T
PanView iQ
™
Interconnect Patch Cords –
Enhanced – UTP CM Rated
Foot lengths:
Meter lengths:
PVQ-EU6AC3BU*
PVQ-EU6AC1MBU^
PanView iQ
™
Interconnect Patch Cords –
Enhanced – STP CM/LSZH Rated
Foot lengths:
Meter lengths:
PVQ-ES6X3BU*
PVQ-ES6X1MBU^
PanView iQ
™
Interconnect Patch Cords –
CM Rated
Foot lengths:
Meter lengths:
PVQ-BIU6C3BU*
PVQ-BIU6C1MBU**
technical information
Category 6A/Class E
A
channel performance:
Certified channel performance in a 4-connector configuration up to
100 meters and exceeds the requirements of
ANSI/TIA-568-C.2 Category 6A and ISO 11801 Class E
A
standards for supporting 10GBASE-T transmission over twisted-pair
cabling systems
Certified component performance to the ANSI/TIA-968-A
component standard for supporting 10GBASE-T transmission over
twisted-pair cabling systems
PanView iQ
™
Interconnect Patch Cords –
LSZH Rated
Meter lengths:
™
PVQ-BIU6L1MBU^
PanView iQ Patch Panels
Modular, intelligent, blank 24-port
PVQ-MIQPU24
Flat unshielded:
Angled unshielded:
PVQ-MIQAPU24
Flat shielded:
PVQ-MIQPS24
Angled shielded:
PVQ-MIQAPS24
PanView iQ
™
Intelligence Modules
Panel manager (PM):
Expansion
module (EM):
PVQ-PM
PVQ-EM
Cable diameter:
IEC compliance:
PoE compliance:
UL rated:
0.295 in. (7.5mm) nominal
Meets IEC 60603-7
Meet requirements of IEEE 802.3af and IEEE 802.3at for
PoE applications
Meets UL 1863
NOTE: PM requires PanView iQ
™
Power Supply
(not included).
PanView iQ
™
Power Supply
12 volt power supply
(North America):
(
Europe):
(UK):
(Japan):
(China):
PVQ-PS12VDC-S
PVQ-PS12VDC-E
PVQ-PS12VDC-U
PVQ-PS12VDC-J
PVQ-PS12VDC-C
key features and benefits
Switch/server
port detection
100% performance tested
Integral pair manager
Slender strain relief boot
Patented tangle free latch
Ninth conductor continuity
Communicates connection status between switch/server
and PViQ
™
Patch Panels
Assurance that each patch cord will deliver the critical
electrical performance requirements
Optimizes performance and consistency by reducing untwist
at the plug
Provides easy access in high-density applications
Prevents snags and provides easy release, saving time on
frequent moves, adds, and changes
Provides continuity through the patch cord enabling the
PanView iQ
™
System to monitor connectivity without
interfering with Ethernet performance
Meets individual length and color-coding requirements for
greater system flexibility
LEDs aid in patch cord tracing and connectivity changes at
the switch end; they also identify unauthorized removals
or insertions
PIM
™
Software Platform and Modules
Base functionality
module:
PIM-BASE
Connectivity
management module:
PIM-CONNECT‡
Maintenance, support and warranty
PIM-CAMA
agreement
:
Software and
PIM-MEDIA
documentation:
*For standard lengths other than 3 feet (5, 7, 10, 14,
or 20) change the length designation in the part
number to the desired length. For standard cable color
other than BU (Blue), replace suffix BU with WH (White)
at the end of the part number. For example, the part
number for a white, 5-foot UTP patch cord is
PVQ-EU6AC5WH. For example, the part number for
a white, 5-foot STP patch cord is PVQ-ES6X5WH.
^For standard lengths other than 1 meter (2, 3, 5 or
10) change the length designation in the part number
to the desired length. For standard cable color other
than BU (Blue), replace suffix BU with WH (White) at
the end of the part number. For example, the part
number for a white 2 meter UTP patch cord is
PVQ-ES6X2MWH. For example, the part number for
a white 2 meter STP patch cord is PVQ-ES6X2MWH.
**For standard lengths other than 3 feet (5, 7, 10, 14,
or 20) change the length designation in part number to
the desired length. For standard cable colors other than
BU (Blue) replace suffix BU with GR (Green) at the end
of the part number. For example, the part number for a
green 10-foot CM patch cord is PVQ-BIU6C10GR.
***For standard lengths other than 1 meter (2, 3, 5, or
10) change the length designation in part number to
the desired length. For standard cable colors other than
BU (Blue) replace suffix BU with GR (Green) at the end
of the part number. For example, the part number for a
green 10-meter CM patch cord is PVQ-BIU6C10MGR.
^^For standard lengths other than 1 meter (2, 3, 5, or
10) change the length designation in part number to the
desired length. For standard cable colors other than BU
(Blue), replace suffix BU with WH (White) at the end of
the part number. For example, the part number for a
white 10-meter, LSZH patch cord is PVQ-BIU6L10MWH.
‡To order this module, add the appropriate letter to the
end of the part number, based on the size of the
installation: -S (<50 racks); -M (50-199 racks); -L
(200-399 racks); -X (400+ racks). For example, the
part number for the Connectivity Management Module
for 250 racks is PIM-CONNECT-L.
Variety of cable colors
and lengths
LED indicator and switch
applications
Panduit’s PViQ
™
System Hardware, which
includes intelligent patch panels, modules and
cabling, seamlessly feeds information directly
into the Physical Infrastructure Manager (PIM
™
)
Software Platform to provide continuous real-time
patch field monitoring and visibility of physical
infrastructure connectivity for enhanced system
reliability and security and capacity management.
PViQ
™
Patch Panels support tiered installations
to provide customers with the flexibility of
installing passive connectivity that may be
upgraded to fully managed at a future time.
PViQ
™
Interconnect Patch Cords enable
intelligent physical infrastructure management for
interconnect architectures by verifying switch port
connection and communicating with the system
software, to allow improved network visibility.
Interconnect patch cords can reduce patch panel
requirements by 50% over cross-connect
designs, reducing installation and
deployment costs.
w w w. p a n d u i t . c o m
京公网安备 11010802033920号
EEWORLD
