SPECIFICATION CONTROL DRAWING
Title
SCD
55A4833
Revision
THREE CONDUCTOR CABLE, JACKETED, GENERAL PURPOSE, 600 VOLT
Date
2-16-17
B
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
COMPONENT WIRES - 55A0813
JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
CABLE CONSTRUCTION DETAILS
PART NUMBER
1/
55A4833-26-*
55A4833-24-*
55A4833-22-*
55A4833-20-*
55A4833-18-*
55A4833-16-*
55A4833-14-*
55A4833-12-*
55A4833-10-*
55A4833-8-*
55A4833-6-*
55A4833-4-*
CONDUCTOR
SIZE
(AWG)
26
24
22
20
18
16
14
12
10
8
6
4
JACKET THICKNESS
(inch)
MINIMUM
.006
.006
.006
.006
.006
.006
.007
.007
.007
.009
.010
.013
NOMINAL
.008
.008
.008
.008
.008
.008
.009
.009
.009
.011
.012
.015
OUTSIDE DIAMETER
(inch)
NOMINAL
.102
.113
.124
.141
.167
.182
.221
.258
.307
.443
.545
.700
MAXIMUM
.108
.119
.130
.148
.176
.191
.232
.271
.323
.465
.572
.735
7.3
9.4
12.4
17.4
25.6
31.5
47.6
69.0
107.
210.
314.
528.
MAXIMUM
WEIGHT
(lbs/1000 ft.)
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
ACCELERATED AGING: 300 ± 3°C for 7 hours
BLOCKING: 200 ± 3°C for 6 hours
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
FLAMMABILITY: Procedure 1,
3 seconds (maximum), 3 inches (maximum);
no flaming of facial tissue
JACKET COLOR: White preferred
JACKET ELONGATION AND TENSILE STRENGTH:
Elongation, 50% (minimum)
Tensile Strength, 5000 lbf/in
2
(minimum)
LIFE CYCLE: 230 ± 3°C for 500 hours
LOW TEMPERATURE-COLD BEND: -65 ± 3°C for 4 hours
1/ PART NUMBER:
The "*" in the part numbers above shall be replaced by color
code designators with a slash separating the component wire
colors and a dash separating the component wire colors from
the jacket color. Colors shown do not necessarily reflect the
sequence of manufacturing.
Example: AWG 24, orange, blue, and white component
wires; white jacket: 55A4833-24-3/6/9-9
NOTE: Nominal values are for information only. Nominal values are not requirements.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, and TE connectivity (logo) are trademarks.
Page 1 of 1
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-522-6752
Fax: 1-650-361-6297
© 2017 TE Connectivity Ltd. family of companies. All Rights Reserved.
京公网安备 11010802033920号
EEWORLD
