.100” × .100” .050” Pitch Cable (Optional Plastic or Metal Strain Relief)
•
•
•
•
•
•
•
•
•
•
3000 Series
Industry standard IDC socket
Optional plastic or low profile metal strain relief
Positive locking metal ‘‘J’’ clips provide high
cover retention
Mates with 3M headers, plugs and pin strips for
quick connect/disconnect capability
Open or closed end covers available
Accepts flat cable or discrete wire
Military polarization, with or without centerbump
Faster termination, lower applied cost and improved
productivity
• See the Regulatory Information Appendix (RIA) in the
“RoHS compliance” section of www.3mconnectors.com
for compliance information (RIA E1 & C1 apply)
Date Modified: May 1, 2012
TS-0719-E
Sheet 1 of 2
Physical
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact:
Material:
Copper Alloy
Plating:
Underplating and U-Slot: 100 μ” [ 2.54 μm ] Nickel - QQ-N-290, Class 2
Wiping Area: 30 μ” [ 0.76 μm ] Gold, MIL-G-45204, Type II, Grade C
Wire Accommodation: 26 and 28 AWG Solid and Stranded
Marking:
3M Logo, Part Identification Number and Orientation Triangle
Electrical
Current Rating:
26 AWG
28 AWG
1 Line
4.75
4.50
6 Adjacent Lines
2.00
1.75
All Lines
1.00
1.00
Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20% derated.
Reference appropriate 3M Product Specification for detailed current derating curves.
Insulation Resistance:
> 1 × 10
9
Ω
at 500 V
DC
Withstanding Voltage:
1,000 V
RMS
at Sea Level
Environmental
Temperature Rating:
-55°C to +105°C
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Wiremount Socket Preassembled
.100” × .100” .050” Pitch Cable (Optional Plastic or Metal Strain Relief)
C
Inch
(mm)
Tolerance Unless Noted
.0
Inch
A
.24
[ 6.1 ]
NO.3XXX
Recessed for Cable
Exit
B
.050 Typ
[ 1.27 ]
3000 Series
Dimensions
A
0.48 [12.2]
0.58 [14.7]
0.68 [ 17.3 ]
0.88 [ 22.4 ]
0.98 [ 24.9 ]
1.18 [ 30.0 ]
1.38 [ 35.1 ]
1.48 [ 37.6 ]
1.68 [ 42.7 ]
1.88 [ 47.8 ]
1.98 [ 50.3 ]
2.18 [ 55.4 ]
2.38 [ 60.5 ]
2.68 [ 68.1 ]
3.18 [ 80.8 ]
B
0.34 [8.6]
0.44 [11.2]
0.54 [ 13.7 ]
0.74 [ 18.8 ]
0.84 [ 21.3 ]
1.04 [ 26.4 ]
1.24 [ 31.5 ]
1.34 [ 34.0 ]
1.54 [ 39.1 ]
1.74 [ 44.2 ]
1.84 [ 46.7 ]
2.04 [ 51.8 ]
2.24 [ 56.9 ]
2.54 [ 64.5 ]
3.04 [ 77.2 ]
.00
.000
Contact
Quantity
6
8
10
14
16
20
24
26
30
34
36
40
44
50
60
Socket
Series
3863
3868
3473
3385
3452
3421
3626
3399
3419
3414
9436
3417
9444
3425
3334
±
.1
±
.01
±
.005
[ ] Dimensions for
Reference only
.070 Ref
[ 1.78 ]
.050 Ref
[ 1.27 ]
.15
[ 3.8 ]
Triangle Indicates
Position 1
See Note 1
Position 1
.14
[ 3.6 ]
Military:
Dual Polarization
Slots
See Note 4
.26
[ 6.6 ]
.54 Ref
[ 13.7 ]
.06 Centerbump (Optional)
[ .15 ]
.035
[ 0.89 ]
.14
[ 3.6 ]
Assembled Height with Metal
Strain Relief
.41 Ref
[ 10.4 ]
.24
[ 6.1 ]
.100 Typ
[ 2.54 ]
Position 2
A
.100
[ 2.54 ]
Assembled Height
without Strain Relief
Notes:
1. This polarizing groove is non-existent on 3863, 3868, 3385 and 3473 Series.
2. The low profile strain relief can be used with the 4600 Series Plug and .1 x .1 Headers with
ejector latches. The latches will only function as an ejector.
3. See TS-0721 for mating post pattern.
4. This polarizing groove is non-existent on 3863 and 3868 Series for Polarization Option 6.
.565 Ref
[ 14.35 ]
.64 Ref
[ 16.3 ]
Assembled Height with Plastic
Strain Relief
Ordering Information
Sockets
Socket Series:
XXXX-XXXX
See Table for
3M Part Number
Polarization:
0 = Military (Dual Slot)
6 = Centerbump and Military
Preassembled Cover Options:
G= Open Cover, recess on odd row side
H= Open Cover, recess on even row side
J= Closed Cover, for end cable termination, recess on odd row side
(10-60 Position Only)
K= Closed Cover, for end cable termination, recess on even row side
(10-60 Position Only)
00 = No Strain Relief
XX = Contact Quantity for Plastic
Strain Relief 10-60 Position.
(i.e. 50 for a 50
Position Strain Relief)
05= Plastic Strain Relief.
6 & 8 Position.
06 = Metal Strain Relief
10-60 Position
Strain Relief
(Order Separately)
3448-X0XX
Type:
2 = Low Profile 10-60
Position (Metal)
3 = Plastic
XX = ‘‘Contact Quantity’’
(i.e. 50 for
a 50 Position
Strain Relief)
Keying Plug
(Order Separately)
3435-0
See TS-0720
Pull Tabs
(Order Separately)
3490-X
TS-0719-E
Sheet 2 of 2
3
Electronic Solutions Division
Interconnect Solutions
http://www.3mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
The copper foil of PCB is generally connected to the ground wire. Increasing the area of the ground wire is conducive to reducing the impedance of the ground wire, making the power supply and signal t...
[i=s]This post was last edited by 770781327 on 2015-3-31 22:05[/i] I have been very busy recently. . . . . Various troubles, the dual-core switching in the same project is not smooth. To change my moo...
Urgent help!!! I used to measure temperature with DS18B20, which was very good. But I recently applied for TI's TMP275 temperature sensor chip, which uses I2C communication, which I am not very good a...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
Abstract:
With the increasing complexity of smart vehicle electrical and electronic architectures, the full lifecycle management of vehicle electronic control components faces multiple challe...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
Reflow soldering is one of the most commonly used methods in electronics manufacturing, allowing for the soldering of large numbers of components in a relatively short time. However, any experience...[Details]
According to Nikkei, Japan has performed poorly in responding to China's power semiconductor challenges.
There are five major companies in Japan's power chip market: Mitsubishi Electric,...[Details]
In daily life, power transformers have different functions and uses due to different usage scenarios. The most common ones can be divided into: control transformers, isolation transformers, rectifi...[Details]
According to Nikkei, a survey found that global electric vehicle battery supply is expected to reach more than three times the required quantity due to
cooling
demand for electric vehicles,...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
Tiantai Robot's official Weibo account announced on the evening of August 20 that Tiantai Robot Co., Ltd., together with strategic partners including Shandong Future Robot Technology Co., Ltd., Sha...[Details]
MQTT Ethernet I/O modules primarily collect I/O port information and transmit data over the network. In addition to being a TCP server, Ethernet I/O modules can also function as TCP clients. Furthe...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
