ISL28227FUBZ is an OPERATIONAL AMPLIFIER from Intersil. The commonly used packaging method is TSSOP,
ISL28227FUBZ amplifier core information:
The minimum operating temperature of the ISL28227FUBZ is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.012 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ISL28227FUBZ is 3.6 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28227FUBZ gain becomes 0.707 times the low-frequency gain is 10000 kHz.
The nominal supply voltage of the ISL28227FUBZ is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28227FUBZ is 150 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of ISL28227FUBZ:
The width of ISL28227FUBZ is: 3 mm, and the length is 3 mm. ISL28227FUBZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8, 8, 8
ISL28227FUBZ amplifier additional information:
Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 3. The corresponding JESD-30 code is: S-PDSO-G8. The corresponding JESD-609 code is: e3. The packaging code of ISL28227FUBZ is: TSSOP.
The materials used in the ISL28227FUBZ package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28227FUBZ package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.
ISL28227FUBZ is an OPERATIONAL AMPLIFIER from Intersil. The commonly used packaging method is TSSOP,
ISL28227FUBZ amplifier core information:
The minimum operating temperature of the ISL28227FUBZ is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.012 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ISL28227FUBZ is 3.6 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28227FUBZ gain becomes 0.707 times the low-frequency gain is 10000 kHz.
The nominal supply voltage of the ISL28227FUBZ is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28227FUBZ is 150 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of ISL28227FUBZ:
The width of ISL28227FUBZ is: 3 mm, and the length is 3 mm. ISL28227FUBZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8, 8, 8
ISL28227FUBZ amplifier additional information:
Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 3. The corresponding JESD-30 code is: S-PDSO-G8. The corresponding JESD-609 code is: e3. The packaging code of ISL28227FUBZ is: TSSOP.
The materials used in the ISL28227FUBZ package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28227FUBZ package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.
1. Add “-T13” suffix for 6k unit, -T7” suffix for 1k,“-T7A” suffix for 250 unit Tape and Reel options. Please refer to
TB347
for details on reel specifications.
2. Add “-T13” suffix for 2.5k unit, -T7” suffix for 1k,“-T7A” suffix for 250 unit Tape and Reel options. Please refer to
TB347
for details on reel specifications.
3. Add “-T13” suffix for 2.5k unit, -T7” suffix for 1.5k,“-T7A” suffix for 250 unit Tape and Reel options. Please refer to
TB347
for details on reel specifications.
4. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate
plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
5. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb
and Pb-free soldering operations.
6. For Moisture Sensitivity Level (MSL), please see device information page for
[size=5]I received the small board early, but I have never used this debugging method. I have been struggling to connect it until now. Now I can read the device number under Flash magic. I am posting ...
Question: Hardware: EPDZ3338 + touch screen (layer resistance is 5-6K) The chip integrates the touch screen driver. When detecting, just set the touch screen detection flag to turn on the touch screen...
[i=s]This post was last edited by paulhyde on 2014-9-15 09:11[/i]Since I participated in this National College Student Electronic Circuit Design Competition, my direction was power supply.
In the ques...
Thank you for clicking on my first post. Thank you~ Thank you~ I'm interested in ARM (ToT), but the development boards on Taobao are really dazzling... *********How should I choose *********? Can you ...
@gmchen [url=https://bbs.eeworld.com.cn/thread-570162-1-1.html]Talking about active filters - state variable filters and switched capacitor filters[/url] [url=https://bbs.eeworld.com.cn/thread-571946-...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
As LEDs continue to improve in almost every aspect of performance and cost, LED lighting is being used in an increasingly wide range of applications, among which LED street lights are a focus of in...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
D5026A is a driver IC designed by Shanghai Debei Electronics for energy-saving LED display screens. Its design concept is energy-saving and compatible with existing solutions, that is, it can be ...[Details]
0 Introduction
There are many types of sensors, and the working principles, measurement targets and measurement environments of different types of sensors vary greatly. The corresponding detection s...[Details]
The demand for improved healthcare environments is endless, so medical imaging equipment with higher resolution is needed to better observe the human body. High resolution brings problems with sign...[Details]
Battery clamps, commonly known as battery connectors, come in two sizes depending on the thickness of the battery terminals. One is the battery clamp used on thick terminals, with a positive termin...[Details]
Electrostatic coupling and interference occur when a charged object is close to the input of the circuit being measured. At low impedance, the effects of interference are not noticeable because th...[Details]
Nowadays, more and more people have digital cameras. The convenience and speed of digital cameras have gradually replaced film cameras and become the main tool for people's daily photography. The n...[Details]