BU-64703B3-290W datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-64703B3-290W

BU-64703B3-290W: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, BGA; CategoryThe embedded processor and controller Microcontrollers and processors; File Size1MB，50 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-64703B3-290W Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, BGA

BU-64703B3-290W Parametric

Parameter Name	Attribute value
Maker	Data Device Corporation
package instruction	BGA,
Reach Compliance Code	compliant
Other features	ALSO OPERATES AT 3.3V LOGIC POWER; FOR BGA PACKAGE CONSULT FACTORY
boundary scan	NO
letter of agreement	MIL-STD-1553A; MIL-STD-1553B; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	X-XBGA-B
JESD-609 code	e0
low power mode	YES
Number of serial I/Os	2
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Package body material	UNSPECIFIED
encapsulated code	BGA
Package shape	UNSPECIFIED
Package form	GRID ARRAY
Maximum supply voltage	5.25 V
Minimum supply voltage	4.75 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	TIN LEAD
Terminal form	BALL
Terminal location	BOTTOM
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553
Base Number Matches	1

Preview

Download Datasheet

View All

BU-64703

Make sure the next

Card you purchase

has...

SIMPLE SYSTEM RT MARK3

(SSRT MARK3)

FEATURES

•

Complete Integrated Remote Terminal

Including:

•Dual Low-Power 3.3V or 5.0V

Transceivers

•Complete RT Protocol Logic

•

Supports MIL-STD-1553A/B Notice 2,

STANAG-3838 RT, and

MIL-STD-1760 Stores Management

•

World’s Smallest CQFP SSRT

•

80-Pin Ceramic Flat Pack or Gull Wing

Package

DESCRIPTION

The BU-64703 Simple System RT Mark3 (SSRT Mark3) MIL-

STD-1553 terminal provides a complete interface between a simple

system and a MIL-STD-1553 bus. The SSRT Mark3 can be powered

entirely by 3.3 volts, thus eliminating the need for a 5V power supply.

This terminal integrates dual transceiver, protocol logic, and a FIFO

memory for received messages in an extremely small, 0.88 inch

square 0.130” max height ceramic package. The gull wing package

with a “toe-to-toe” maximum dimension of 1.110 inches enables its

use in applications where PC board space is at a premium. The

SSRT Mark3 provides multi-protocol support of MIL-STD-1553A/B,

MIL-STD-1760, McAir, and STANAG-3838.

The SSRT Mark3's transceivers are completely monolithic, require

only a +3.3V supply (+5.0V available), and consume low power. The

internal architecture is identical to that of the original BU-61703/61705

Simple System RT (SSRT). There are versions of the Simple System

RT Mark3 available with transceivers trimmed for MIL-STD-1760

compliance, or compatible to McAir standards. The SSRT Mark3 can

operate with a choice of clock frequencies at 10, 12, 16, or 20 MHz.

The SSRT Mark3 incorporates a Built-In-Test (BIT). This BIT, which is

processed following power turn-on or after receipt of an Initiate Self-

Test Mode command, provides a comprehensive test of the SSRT

Mark3's encoders, decoders, protocol, transmitter watchdog timer,

and protocol section. The SSRT Mark3 also includes an auto-config-

uration feature.

The SSRT Mark3 is ideal for stores and other simple systems that do

not require a microprocessor. To streamline the interface to simple

systems, the SSRT Mark3 includes an internal 32-word FIFO for

received data words. This serves to ensure that only complete, con-

sistent blocks of validated data words are transferred to a system.

•

3.3V Logic Power

•

Meets 1553A/McAir Response Time

Requirements

•

Internal FIFO for Burst Mode Capability on

Receive Data

•

16-bit DMA Interface

•

Auto Configuration Capability

•

Comprehensive Built-In Self-Test

•

Direct Interface to Simple (Processorless)

Systems

•

Available with Full Military Temperature

Range and Screening

•

Selectable Input Clock:

10, 12, 16, or 20 MHz

FOR MORE INFORMATION CONTACT:

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

2003 Data Device Corporation

Recommended Resources

Practical overheating alarm circuit

ISO102-106 functional schematic diagram

Load cell arch bridge voltage direct compensation circuit

Walkman fast charger

Semiconductor pressure sensor interface circuit

Thyristor controlled flash light circuit

Clock Oscillator Circuit Analysis: [size=4] The clock oscillator circuit is used to generate the clock signal required for the normal operation of the microcontroller. The 51 series microcontroller can use two types of clock oscillator...; Jacktang Analogue and Mixed Signal

CCS V5 local variable problem: When using C2000 Launchpad, the local variables in the function cannot be controlled, such as Uint16 i ; for ( i = 0 ; i < 1024 ; i++ ){} ... the variable i changes only once, and then jumps out of th...; dontium Microcontroller MCU

About 51 single chip microcomputer control DC motor speed regulation: As shown in the figure above, please help me write a program in Keil u4 to control the speed of the motor. Forward 1 represents a forward speed, and forward 2 represents a forward second speed (the sp...; 淡饭 51mcu

Who has a pudn account? Can you help me download the program?: It would be best if you can download all of them. If not, download them in order. http://www.pudn.com/downloads54/sourcecode/windows/control/button/detail188095.html http://www.pudn.com/downloads62/so...; sanwa_chen Embedded System

Help with microvolt-level DC voltage amplification: I want to amplify a 100uV-2mV signal. I used op07cp and first used a subtraction circuit to collect and amplify it, but it didn't work. Later, I used an instrument amplifier circuit to experiment, but...; 20103242 Analog electronics

Problems with configuring multiple registers in FPGA: As the title says, I would like to ask you how to configure multiple groups of FPGA registers by sending data through the serial port of the host computer, and the number of bits of the registers is r...; wtm_dxyb FPGA/CPLD

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components