Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50
Amps. For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.
(3)
Output will self trigger between 900-1200Vpk, Min., not suituable for capacitive loads.
(4)
Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.
(5)
All parameters at 25°C unless otherwise specified.
(6)
Heat sinking required, see derating curves.
(7)
For 40mA minimum current, the voltage drop increases over maximum rated.
(8)
Increase minimum voltage by 1V for operations from -20 to -40°C.
(9)
Turn-on time for Instantaneous turn-on versions is 0.02 msec (DC Control Models).
(10)
All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).
(11)
Load can be wired to either SSR output terminal 1 or 2.
(12)
Elective Input Status LED, “G” option.
(13)
Elective Overvoltage Protection, “P” option.
(14)
Mechanical dimensions vary from G3 models.
For additional information or specific questions, contact Crydom Technical Support.
After the Cadence 16.5 Concept HDL schematic is back-annotated, CDS_PART_NAME information appears for each component, and the entire schematic looks very messy, as shown in the figure. [img]http://bbs...
[i=s]This post was last edited by yang_alex on 2015-10-15 12:36[/i] I got a MicroChip USB evaluation board from a netizen [url=https://home.eeworld.com.cn/space-uid-367757.html][color=#0066cc]lcofjp[/...
VC custom message postmessage usage 1. Add the following code in the resource.h file to define your own message #define WM_MY_MESSAGE WM_USER + 100 // 1. Custom message value 2. Add the following ...
Analysis of psychological factors of smart home dealers Prerequisite factors: persistent belief For most dealers, the current domestic smart home market is still in a state of development, and the pro...
[i=s]This post was last edited by paulhyde on 2014-9-15 09:47[/i] 1. For undergraduate group use
Main instruments and equipment:
RIGOL DSA1030; Programmable linear DC power supply RIGOL DP1308; RIGOL ...
1. Overview
Will passive devices
produce nonlinear intermodulation distortion? The answer is yes! Although there is no systematic theoretical analysis, it has been found in engineerin...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
Since AC mains power may experience power outages, voltage sags and surges, continuous undervoltage and overvoltage, and frequency fluctuations during supply, these factors will affect the continuous ...[Details]
summary
This article will briefly analyze the success and shortcomings of high-frequency DC-DC switching power supplies in the process of miniaturization (the second basic goal), and propose m...[Details]
There are many types and styles of digital voltmeters in design and development. Traditional digital voltmeters have their own characteristics. They are suitable for manual measurement on site. Tra...[Details]
1. Introduction
AS-Interface bus technology is an intelligent network that uses a single cable to connect sensors and actuators to controllers, transmit data, and provide power. It can be used...[Details]
In the test of the electronic ignition module, in order to simulate the real working conditions of the electronic ignition system, the electronic ignition module is often placed in an environment h...[Details]
In order to ensure that lighting-grade white light LEDs can not only be well applied but also achieve high utilization efficiency, first of all, it is necessary to meet certain application conditions,...[Details]
With the development and application of liquid crystal display technology, more and more developers want to use liquid crystal screens to display Chinese characters in the instruments and equipment th...[Details]
The Challenge:
Improving Siemens Wind
Turbine Controls
System software automated testing for regular releases, validating wind turbine control system components during the developme...[Details]
This paper first proposed an elevator controller algorithm based on a finite state machine, and then designed a three-story elevator controller based on the algorithm. The correctness of the elevat...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
