Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in
different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the
Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized
application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
added the IIC to the document; added for B64 more details in the
preface and the according “Memory Map out of Reset”
Updated bus frequency in
Table A-4;
updated numbers in
A.3.1.2
and
A.3.1.3
Updated B64 details. Corrected numbering in
Table A-26.
Replaced references to HCS12 Core Guide by the individual
HCS12 Block guides.
Table 2-1
corrected pullrresistor reset state PE4-PE2.
Table A-1
corrected footnote on clamp of TEST pin.
Updated
Section 11, Section 15, A.5.2 Oscillator
Table A-15
corrected Num 9 and 10.
Added
Table 0-2
and note at Section
8.1
Updated
Table 1-3
Updated
Table 0-5,
row 6 of
Table A-15
Added
Table 0-3,
updated
Figure 0-1
and
Table 1-3
Added
Table 0-4;
updated
Table 1-3;
added Note in
Section 11;
row 5 & 6 of
Table A-7;
row 4 & 7
Table A-17; A.5.1.5; A.5.1.6;
Table A-20
row 13 & 14
V01.05
V01.06
V01.07
V01.08
V01.09
V01.10
V01.11
01 SEP
2003
31 OCT
2003
22 JAN
2004
24 FEB
2004
17 MAR
2004
13 AUG
2004
01 SEP
2003
31 OCT
2003
22 JAN
2004
24 FEB
2004
17 MAR
2004
13 AUG
2004
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in
different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the
Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized
application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges
that Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
I am currently using TMS4701R288 to debug the program. If the interrupt is turned off, the program can be run in single step using the JLINK simulator, and everything is normal. However, if the interr...
Hey guys! I heard about the STC microcontroller. I went to the official website and found it to be quite concise. The datasheet seems to be a complete guide. Has anyone used STC? I wonder if it is goo...
What is the function of radiotool of CC3200? Mainly factory batch testing. It can be roughly understood that, for example, if you want to test the radio performance of CC3200, you need to set the chip...
[table=98%] [tr][td][p=24, null, left][size=3]Although the input resistance of the junction field effect tube can reach 106~109W, it still cannot meet the requirements in situations where the input re...
A great resignation letter from an IT person [color=red] You often make unreasonable accusations, but why do you keep me now? They once said that you were mean, and only cared if you were wrong to ded...
As a wireless broadband metropolitan area network standard, WiMAX technology has greater advantages than previous 3.5GHz MMDS products in terms of non-line-of-sight transmission and spectrum utiliz...[Details]
China's new energy vehicles are in a transition period from research and development to real industrial development. In 2012, with the intensive launch of new energy vehicle policy planning, the de...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
From the PIC16F946 datasheet, we know that there are two ways to write values to the LCD for display:
1. Directly write the value to LCDDATA1~LCDDATA23
2. Use disconnect t...[Details]
A standard cell
is an electrochemical
cell
used as a voltage reference standard in many electrical standards laboratories
. If properly maintained, standard cells are very stable. The ...[Details]
1. With the development of modern industry and the continuous improvement of automation, some medium and large control systems have been greatly facilitated, which not only makes control easier, bu...[Details]
The potentiometer is an adjustable electronic component. The main functions of the potentiometer in the circuit are as follows:
1. Used as a voltage divider
A potentiometer is a continuou...[Details]
LED lighting: Basic circuit design can be completed in as little as one day
Semiconductor manufacturers are also getting involved in the LED lighting business. The power circuit of LED req...[Details]
With the rapid development of wireless
digital communication
, more challenges have been raised for integrated circuit design and testing. In the product design stage, in order to ensure
t...[Details]
0 Introduction
Ultrasonic waves
are mechanical waves with a frequency of more than 20KHz, and the propagation speed in the air is about 340 m/s (at 20°C). Ultrasonic waves can be gene...[Details]
The launch of Shenzhou IX is imminent, and Tiangong is welcoming visitors again. Yesterday, Professor Fu Qiang, Vice President of the Institute of Science and Industrial Technology of Harbin Instit...[Details]
The ARINC429 bus is one of the most commonly used communication buses between various subsystems of avionics. As the "skeleton" of modern avionics systems, once the bus system or the attached airbo...[Details]
0 Introduction
In order to improve the automation control of shortwave transmitters, so that they can automatically process from far to near, the technicians here use the ICS system to complete the ...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]