Choose one of the two mounting options and follow the instructions.
Mounting on Heat Sinks
• Select adequate heat sink. (Please refer to thermal derating curves for the specific model)
• Be sure that thermal pad is pre-installed before installing over the heat sink.
• EL mounting slots have a diameter of 0.16 in (4.0 mm). Two screws are needed (not included)
to mount the EL onto heat sink (See fig. 1). Recommended screw size is 8-32 (UNC standard) or M4 (metric).
• Before applying full torque tighten down both screws until they contact the baseplate.
Then, tighten them to 9.0-10.0 in-lb (1.0-1.13 Nm).
• For optimal thermal performance heat sink fins should be oriented vertically to promote natural convection airflow.
Mounting on Panels
• Locate the panel section on which the EL will be mounted. Panel mount surface must provide adequate heat sinking capability, uncoated, clean,
flat (0.004 in/in recommended) and preferably aluminum.
• Be sure that thermal pad is pre-installed before install over the heatsink.
• EL mounting slots have a diameter of 0.16 in (4.0 mm). Two screws are needed (not included) to mount the EL onto panel. Choose screw length
considering the mounting surface hole depth and that the SSR flange thickness is 0.125 in (3.2 mm).
• Before applying full torque tighten down both screws until they contact the baseplate. Then, tighten them to 10 in-lb (1.13 Nm).
Transient Protection
Transients are common on AC power lines, and in extreme cases, may pose a risk for the proper operation and reliability of the SSR and its load. The load which
the SSR controls may also generate transients itself. Therefore, inclusion of transient protection for the SSR is highly recommended. Internal transient protection
is standard in certain Crydom SSR models, and optionally available in others. The user may also install transient protection external to the SSR for additional
protection. Contact Crydom technical support for additional information on use of transient protection for AC output SSRs.
Important Considerations
Be sure to use input and output voltages within operating ranges. LED indicates only input status. It does not represent output status.
1. Main function
/*===============Header file================*/#include "DSP2833x_Project.h"#include "C28x_FPU_FastRTS.h"#include math.h//Include user-defined header files#include "SVPWM_2L.h"
int i;
...
I am using CCS5.5. After the project is compiled, I plan to use SEED-XDS510PLUS emulator to connect to the DSP. But in the next step after setting the New Target Configuration file name to SEED-XDS510...
[size=4] Sometimes we need to process data by bytes, especially when doing 8-bit data communication. Most MCUs support byte addresses, which means that when an address is added by 1, the data is moved...
Position: Safety Manager Location: Shanghai Responsibilities: Responsible for the safety of electric vehicle powertrain components. Requirements: 1. Safety experience in the automotive industry, can b...
Zero-crossing detection: When the input is in the positive half cycle, the optocoupler is turned on and the output is low; when the input is in the negative half cycle, the optocoupler is not turned o...
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
Abstract: The output of high-range acceleration sensor is less than 10 mV under the excitation of small signal. The noise of traditional test system may cover such small voltage signal, so that hig...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
introduction
Incandescent bulbs can emit a variety of light, but in specific applications, only green, red, and yellow light are usually needed - such as traffic lights. If an incand...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
At present, with the diversification of portable products and the almost harsh requirements for audio and video parts, the power consumption requirements of the whole machine have been raised to a ...[Details]
summary
This article will briefly analyze the success and shortcomings of high-frequency DC-DC switching power supplies in the process of miniaturization (the second basic goal), and propose m...[Details]
It should be understood as follows: DC-DC means direct current to direct current (conversion of different DC power values). Anything that meets this definition can be called a DC-DC converter, incl...[Details]
introduction
The core features of mobile value-added service products are mobility, immediacy and personalization. Mobile value-added services are a new service mode that is rapidly developing...[Details]
Based on the actual situation, a remote intelligent anti-theft alarm device for home use, connected to the telephone line, simple to operate, and stable and reliable in operation is designed. When ...[Details]
0 Introduction
With the development of virtual instrument technology, new measurement and control methods that use "virtual instruments" to replace traditional instruments are replacing trad...[Details]
As a type of iron battery, lithium iron phosphate battery (hereinafter referred to as lithium iron battery) has always been widely concerned by industry friends (some people say that lithium iron b...[Details]
In recent years, the development of automotive batteries has become a focus of attention. Compared with other rechargeable batteries, lithium-ion batteries have the advantages of high specific ene...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
