MN101C67D datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> MN101C67D

MN101C67D: DescriptionMN101C67D; CategoryThe embedded processor and controller Microcontrollers and processors; File Size100KB，5 Pages; ManufacturerPanasonic; Websitehttp://www.panasonic.co.jp/semicon/e-index.html; Environmental Compliance

Download Datasheet Parametric Compare View All

MN101C67D Overview

MN101C67D

MN101C67D Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Panasonic
Parts packaging code	QFP
package instruction	12 X 12 MM, LEAD FREE, PLASTIC, TQFP-80
Contacts	80
Reach Compliance Code	unknow
Has ADC	YES
Other features	ALSO OPERATES AT 1.8V MINIMUM SUPPLY
Address bus width	18
bit size	8
CPU series	MN101C00
maximum clock frequency	20 MHz
DAC channel	NO
DMA channel	YES
External data bus width	8
JESD-30 code	S-PQFP-G80
length	12 mm
Number of I/O lines	69
Number of terminals	80
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	TFQFP
Encapsulate equivalent code	TQFP80,.55SQ
Package shape	SQUARE
Package form	FLATPACK, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
power supply	2/3.3 V
Certification status	Not Qualified
RAM (bytes)	6144
rom(word)	65536
ROM programmability	MROM
Maximum seat height	1.2 mm
speed	20 MHz
Maximum slew rate	12 mA
Maximum supply voltage	3.6 V
Minimum supply voltage	2.5 V
Nominal supply voltage	3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	NOT SPECIFIED
width	12 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

Preview

Download Datasheet

View All

MN101C67D, MN101C67G

Type

ROM (× 8-bit)

RAM (× 8-bit)

Package

Minimum Instruction

Execution Time

Standard:

MN101C67D (under development)

64 K

TQFP080-P-1212D

*Lead-free

0.1

µs

(at 2.5 V to 3.6 V, 20 MHz)*

0.2

µs

(at 2.1 V to 3.6 V, 10 MHz)*

0.5

µs

(at 1.8 V to 3.6 V, 4 MHz)*

62.5

µs

(at 1.8 V to 3.6 V, 32 kHz)*

Double speed: 0.119

µs

(at 2.5 V to 3.6 V, 8.39 MHz)*

* The operation guarantee range for flash memory built-in type is 3.0 V to 3.6 V.

• RESET • Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • External 5

• Timer 0 • Timer 1 • Timer 2 • Timer 3 • Timer 4 • Timer 5 • Timer 6 • Time base

• Serial 0 reception • Serial 0 transmission • Serial 1 reception • Serial 1 transmission • Serial 2 • Serial 3

• Serial 4 • Automatic transfer finish • A/D conversion finish • Timer 7 (2 systems) • Key interrupts (8 lines)

Timer counter 0 : 8-bit

(square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement)

Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 0

Timer counter 1 : 8-bit

1 (square-wave output, event count, synchronous output event)

Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 1

Timer counter 0, 1 can be cascade-connected.

Timer counter 2 : 8-bit

(square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement)

Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 2

Timer counter 3 : 8-bit

1 (square-wave output, event count, generation of remote control carrier)

Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 3

Timer counter 2, 3 can be cascade-connected.

Timer counter 4 : 8-bit

(square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer)

Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency;

1/1 of external clock input frequency

Interrupt source ················ coincidence with compare register 4

Timer counter 5 : 8-bit

(square-wave/8-bit PWM output, event count, pulse width measurement, serial 0 baud rate timer)

Clock source ······················ 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock

frequency; 1/1 of XI oscillation clock frequency;

1/1 of external clock input frequency

Interrupt source ·················· coincidence with compare register 5

MN101C67G

128 K

10 K

Interrupts

Timer Counter

MAD00036EEM

Request for your special attention and precautions in using the technical information

and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of

the products or technical information described in this material and controlled under the "Foreign Exchange

and Foreign Trade Law" is to be exported or taken out of Japan.

(2) The technical information described in this material is limited to showing representative characteristics and

applied circuits examples of the products. It neither warrants non-infringement of intellectual property right

or any other rights owned by our company or a third party, nor grants any license.

(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical

information as described in this material.

(4) The products described in this material are intended to be used for standard applications or general electronic

equipment (such as office equipment, communications equipment, measuring instruments and household

appliances).

Consult our sales staff in advance for information on the following applications:

•

Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion

equipment, life support systems and safety devices) in which exceptional quality and reliability are re-

quired, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.

•

Any applications other than the standard applications intended.

(5) The products and product specifications described in this material are subject to change without notice for

modification and/or improvement. At the final stage of your design, purchasing, or use of the products,

therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications

satisfy your requirements.

(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating,

the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be

liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of

break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as

redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physi-

cal injury, fire, social damages, for example, by using the products.

(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life

and amount of time let standing of unsealed items) agreed upon when specification sheets are individually

exchanged.

(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written

permission of Matsushita Electric Industrial Co., Ltd.

2003 SEP

MN101C67D Related Products

	MN101C67D	MN101C67G	MN101C67
Description	MN101C67D	MN101C67D	MN101C67D
Is it lead-free?	Lead free	Lead free	-
Is it Rohs certified?	conform to	conform to	-
Maker	Panasonic	Panasonic	-
Parts packaging code	QFP	QFP	-
package instruction	12 X 12 MM, LEAD FREE, PLASTIC, TQFP-80	12 X 12 MM, LEAD FREE, PLASTIC, TQFP-80	-
Contacts	80	80	-
Reach Compliance Code	unknow	unknow	-
Has ADC	YES	YES	-
Other features	ALSO OPERATES AT 1.8V MINIMUM SUPPLY	ALSO OPERATES AT 1.8V MINIMUM SUPPLY	-
Address bus width	18	18	-
bit size	8	8	-
CPU series	MN101C00	MN101C00	-
maximum clock frequency	20 MHz	20 MHz	-
DAC channel	NO	NO	-
DMA channel	YES	YES	-
External data bus width	8	8	-
JESD-30 code	S-PQFP-G80	S-PQFP-G80	-
length	12 mm	12 mm	-
Number of I/O lines	69	69	-
Number of terminals	80	80	-
Maximum operating temperature	85 °C	85 °C	-
Minimum operating temperature	-40 °C	-40 °C	-
PWM channel	YES	YES	-
Package body material	PLASTIC/EPOXY	PLASTIC/EPOXY	-
encapsulated code	TFQFP	TFQFP	-
Encapsulate equivalent code	TQFP80,.55SQ	TQFP80,.55SQ	-
Package shape	SQUARE	SQUARE	-
Package form	FLATPACK, THIN PROFILE, FINE PITCH	FLATPACK, THIN PROFILE, FINE PITCH	-
Peak Reflow Temperature (Celsius)	NOT SPECIFIED	NOT SPECIFIED	-
power supply	2/3.3 V	2/3.3 V	-
Certification status	Not Qualified	Not Qualified	-
RAM (bytes)	6144	10240	-
rom(word)	65536	131072	-
ROM programmability	MROM	MROM	-
Maximum seat height	1.2 mm	1.2 mm	-
speed	20 MHz	20 MHz	-
Maximum slew rate	12 mA	12 mA	-
Maximum supply voltage	3.6 V	3.6 V	-
Minimum supply voltage	2.5 V	2.5 V	-
Nominal supply voltage	3 V	3 V	-
surface mount	YES	YES	-
technology	CMOS	CMOS	-
Temperature level	INDUSTRIAL	INDUSTRIAL	-
Terminal form	GULL WING	GULL WING	-
Terminal pitch	0.5 mm	0.5 mm	-
Terminal location	QUAD	QUAD	-
Maximum time at peak reflow temperature	NOT SPECIFIED	NOT SPECIFIED	-
width	12 mm	12 mm	-
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER	MICROCONTROLLER	-

Recommended Resources

Single-phase AC motor switching control circuit

JS20 series transistor time relay all field effect tube power-on delay circuit

Highly regulated power supply circuit diagram using reference regulator AD580

Optical transmission detection circuit

Intelligent battery fast charging circuit

Telephone indicator circuit

BBB Primary Experience Report: After getting the BBB, I first tried it with USB, and everything worked fine. I used it with SSH, and it worked fine too. Then I downloaded the latest upgrade package, and it worked fine too. Later I ...; besk DSP and ARM Processors

My C language exercises (similar to the moderator's): [code]// NumberToWords.cpp : Defines the entry point for the console application. //#include #includestatic char *digits[] = { "", "ONE ", "TWO ", "THREE ", "FOUR ", "FIVE ", "SIX ", "SEVEN ", "EIGHT ...; yaoyong Programming Basics

Questions about CLA interruption [F28035]: The program I wrote can trigger the ADC by PWM and generate an interrupt, and I want it to trigger the CLA task. However, when entering CLA processing, the expected results are always not achieved, so...; dontium Microcontroller MCU

Newcomer report!!!: Hello everyone!!! I am a new member. Is there any group in the forum for beginners to learn analog electronics?...; gullit84 Analog electronics

How to customize Windows XP Embedded (Part 1): Windows XP Embedded is based on the Win32 programming model. It uses common development tools such as Visual Studio .NET, uses commodity PC hardware, and integrates seamlessly with desktop application...; 呱呱 Embedded System

One of the questions from the 2009 National Undergraduate Electronic Design Competition: 2009 National Undergraduate Electronic Design Competition Questions Notes (1) The competition officially begins at 8:00 on September 2, 2009. Undergraduate teams can only choose one question from the ...; kkktemp Embedded System

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components