LD1086
1.5 A adjustable and fixed low drop positive voltage regulator
Datasheet
-
production data
Description
The LD1086 is a low drop voltage regulator
capable of providing up to 1.5 A of output current.
Dropout is guaranteed at a maximum of 1.2 V at
the maximum output current, decreasing at lower
loads. The LD1086 is pin-to-pin compatible with
older 3-terminal adjustable regulators, but has
better performance in terms of drop and output
tolerance. Unlike PNP regulators, where a part of
the output current is wasted as quiescent current,
the LD1086 quiescent current flows into the load,
increasing efficiency. Only a 10 µF (minimum)
capacitor is needed for stability. The device is
available in a TO-220, D²PAK, D²PAK/A, DPAK or
DFN8 (4x4) package. On-chip trimming allows the
regulator to reach a very tight output voltage
tolerance; within ± 1% at 25 °C. The LD1086 is
available as automotive grade for adjustable
output voltages in the TO-220 and DPAK
packages. The PAT, SYL, SBL statistical tests
have been performed, and the devices are
qualified according to the AEC-Q100 specification
for the automotive market in the temperature
range of - 40 °C to 125 °C.
DPAK
TO-220
D²PAK
DFN8 (4x4)
D²PAK/A
Features
Typical dropout: 1.3 V at 1.5 A
Three-terminal adjustable or fixed output
voltage: 1.8 V, 2.5 V, 3.3 V, 5 V, 12 V
Automotive grade (adjustable V
OUT
in TO-220
and DPAK packages only)
Output current guaranteed up to 1.5 A
Output tolerance: ± 1% at 25 °C and ± 2% in full
temperature range
Internal power and thermal limit
Wide operating temperature range - 40 °C to
125 °C
Package available: TO-220, D²PAK, D²PAK/A,
DPAK and DFN8 (4x4)
Pinout compatibility with standard adjustable
voltage regulators
December 2017
This is information on a product in full production.
DocID6739 Rev 36
1/42
www.st.com
Contents
LD1086
Contents
1
2
3
4
5
6
7
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Schematic application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7.1
7.2
7.3
7.4
7.5
7.6
7.7
TO-220 (STD-ST dual gauge) type A package information . . . . . . . . . . . 23
DPAK package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
D²PAK (SMD 2L STD-ST) type A package information . . . . . . . . . . . . . . 28
D²PAK (SMD 3L STD-ST) type A package information . . . . . . . . . . . . . . 30
DPAK and D²PAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DFN8 (4x4) package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
DFN8 (4x4) packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8
9
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2/42
DocID6739 Rev 36
LD1086
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Table 18.
Table 19.
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Electrical characteristics of LD1086#18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Electrical characteristics of LD1086#25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electrical characteristics of LD1086#33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Electrical characteristics of LD1086#50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Electrical characteristics of LD1086#12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Electrical characteristics of LD1086B# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Electrical characteristics of LD1086# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Electrical characteristics of LD1086DTTRY and LD1086VY (Automotive grade). . . . . . . . 16
TO-220 (STD-ST dual gauge) type A mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
D²PAK (SMD 2L STD-ST) type A mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
D²PAK (SMD 3L STD-ST) type A mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DPAK and D²PAK tape and reel mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DFN8 (4x4) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DFN8 (4x4) reel mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
DocID6739 Rev 36
3/42
42
List of figures
LD1086
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Figure 30.
Figure 31.
Figure 32.
Figure 33.
Figure 34.
Figure 35.
Figure 36.
Figure 37.
Figure 38.
Figure 39.
Figure 40.
Figure 41.
Schematic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pin connections (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Application circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Output voltage vs. temp. (VI = 5 V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Output voltage vs. temp. (VI = 15 V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Output voltage vs. temperature (VI = 4.25 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Short-circuit current vs. dropout voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Line regulation vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Load regulation vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Dropout voltage vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Dropout voltage vs. output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjust pin current vs. input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjust pin current vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjust pin current vs. output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Quiescent current vs. output current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Quiescent current vs. input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Supply voltage rejection vs. output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Supply voltage rejection vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Supply voltage rejection vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Minimum load current vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Stability for adjustable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Stability for 2.85 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Stability for 12 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Line transient (VI = 12 to 13 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Line transient (IO = 200 mA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Line transient (CADJ = 1 µF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Load transient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Load transient (Trise = Tfall = 10 µs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Thermal protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TO-220 (STD-ST dual gauge) type A package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DPAK package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
DPAK recommended footprint (dimension are in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
D²PAK (SMD 2L STD-ST) type A package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
D²PAK (SMD 3L STD-ST) type A outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
D²PAK (SMD 3L) recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DPAK and D²PAK tape outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DPAK and D²PAK reel outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DFN8 (4x4) package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
DFN8 (4x4) recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DFN8 (4x4) tape outline (dimension are in mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
DFN8 (4x4) reel outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4/42
DocID6739 Rev 36
LD1086
Diagram
1
Diagram
Figure 1. Schematic diagram
DocID6739 Rev 36
5/42
42
京公网安备 11010802033920号
EEWORLD
