EEWORLDEEWORLDEEWORLD

Part Number

Search

LD1086D2M15

Description
1.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3
CategoryPower/power management    The power supply circuit   
File Size1MB,42 Pages
ManufacturerSTMicroelectronics
Websitehttp://www.st.com/
Download Datasheet Parametric View All

LD1086D2M15 Overview

1.5 V FIXED POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3

LD1086D2M15 Parametric

Parameter NameAttribute value
MakerSTMicroelectronics
Parts packaging codeD2PAK
package instructionD2PAK/A-3
Contacts3
Reach Compliance Codecompliant
ECCN codeEAR99
AdjustabilityFIXED
Maximum drop-back voltage 11.5 V
Nominal dropback voltage 11.3 V
Maximum absolute input voltage30 V
Maximum input voltage30 V
Minimum input voltage3.4 V
JESD-30 codeR-PSSO-G3
length10.2 mm
Maximum grid adjustment rate0.004%
Maximum load regulation0.016%
Number of functions1
Output times1
Number of terminals3
Working temperatureTJ-Max125 °C
Working temperature TJ-Min-40 °C
Maximum output current 11.5 A
Maximum output voltage 11.53 V
Minimum output voltage 11.47 V
Nominal output voltage 11.5 V
Package body materialPLASTIC/EPOXY
encapsulated codeTO-263
Encapsulate equivalent codeSMSIP3H,.55TB
Package shapeRECTANGULAR
Package formSMALL OUTLINE
Certification statusNot Qualified
Regulator typeFIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Maximum seat height4.83 mm
surface mountYES
technologyBIPOLAR
Terminal formGULL WING
Terminal pitch2.54 mm
Terminal locationSINGLE
Maximum voltage tolerance2%
width9.15 mm
Base Number Matches1
LD1086
1.5 A adjustable and fixed low drop positive voltage regulator
Datasheet
-
production data
Description
The LD1086 is a low drop voltage regulator
capable of providing up to 1.5 A of output current.
Dropout is guaranteed at a maximum of 1.2 V at
the maximum output current, decreasing at lower
loads. The LD1086 is pin-to-pin compatible with
older 3-terminal adjustable regulators, but has
better performance in terms of drop and output
tolerance. Unlike PNP regulators, where a part of
the output current is wasted as quiescent current,
the LD1086 quiescent current flows into the load,
increasing efficiency. Only a 10 µF (minimum)
capacitor is needed for stability. The device is
available in a TO-220, D²PAK, D²PAK/A, DPAK or
DFN8 (4x4) package. On-chip trimming allows the
regulator to reach a very tight output voltage
tolerance; within ± 1% at 25 °C. The LD1086 is
available as automotive grade for adjustable
output voltages in the TO-220 and DPAK
packages. The PAT, SYL, SBL statistical tests
have been performed, and the devices are
qualified according to the AEC-Q100 specification
for the automotive market in the temperature
range of - 40 °C to 125 °C.
DPAK
TO-220
D²PAK
DFN8 (4x4)
D²PAK/A
Features
Typical dropout: 1.3 V at 1.5 A
Three-terminal adjustable or fixed output
voltage: 1.8 V, 2.5 V, 3.3 V, 5 V, 12 V
Automotive grade (adjustable V
OUT
in TO-220
and DPAK packages only)
Output current guaranteed up to 1.5 A
Output tolerance: ± 1% at 25 °C and ± 2% in full
temperature range
Internal power and thermal limit
Wide operating temperature range - 40 °C to
125 °C
Package available: TO-220, D²PAK, D²PAK/A,
DPAK and DFN8 (4x4)
Pinout compatibility with standard adjustable
voltage regulators
December 2017
This is information on a product in full production.
DocID6739 Rev 36
1/42
www.st.com
Can the ECG sensor work in water?
Hello experts, I'm new here and would like to ask if the ECG sensor can work in water, for example, putting two electrodes on a swimmer to measure the heartbeat, is it feasible? If not, what sensor is...
cinda_wl Sensor
Excitation reset of half-bridge (including full-bridge/push-pull)
[i=s]This post was last edited by PowerAnts on 2020-9-18 16:25[/i]In CCM, if the output current is not less than the peak value of the excitation current * turns ratio, the excitation current reflecte...
PowerAnts Power technology
Let’s practice together in 2021 and continue to cultivate
The Master stood by a river and said, "Time passes by like this!"2020 is over. I want to say something about 2020. After thinking for a long time, I found that it was unexpected!I once thought that it...
robdm Talking
Please tell me about the input impedance of the chip
This is the circuit diagram I saw. The article says that the chip differential input and output resistance is 200 ohms, and the single port to ground impedance is 100 ohms. Therefore, a 100 ohm resist...
sen19890606 Analog electronics
How to connect common cathode seven segment digital tube?
I would like to ask you, can the common cathode digital tube be driven by the 74LS series NAND or AND gate? Connect a small resistor to the i/o output port, then connect the NOT gate, then connect to ...
shcpz Industrial Control Electronics
How to compile and configure uclinux so that arm can automatically obtain ip after power on?
How to configure uclinux to let arm automatically get ip after power on? My development board is S3C44B0. I heard that uclinux supports dhcp. 1. What should I choose when compiling uclinux 2.4 kernel ...
raiderchina Linux and Android

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 297  1494  819  576  299  6  31  17  12  7 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号