spread-spectrum (dithered) square-wave output of fre-
quencies from 130kHz to 66.6MHz. The DS1087L is
shipped from the factory programmed at a specific fre-
quency and spread-spectrum percentage. The user still
has access to an internal frequency divider, selectable
2% or 4% dithered output, and programmable output
power-down/disable mode through a 2-wire program-
ming interface. All the device settings are stored in non-
volatile (NV) EEPROM allowing it to operate in
stand-alone applications. The DS1087L has power-
down and output-enable control pins for power-sensi-
tive applications.
Features
♦
Factory Programmed Square-Wave Generator
from 130kHz to 66.6MHz
♦
No External Timing Components Required
♦
EMI Reduction
♦
2.7V to 3.6V Supply
♦
User Programmable Down to 130kHz with Divider
(Dependent on Master Oscillator Frequency)
♦
2% or 4% Selectable Dithered Output
♦
Glitchless Output-Enable Control
♦
2-Wire Serial Interface
♦
Nonvolatile Settings
♦
Power-Down Mode
♦
Programmable Output Power-Down/Disable Mode
DS1087L
Applications
Printers
Copiers
PCs
Computer Peripherals
Cell Phones
Cable Modems
Ordering Information
PART
DS1087LU-yxx
TEMP RANGE
-40°C to +85°C
PIN-PACKAGE
8 µSOP (118 mils)
Standard Frequency Options
PART
DS1087LU-202
DS1087LU-402
DS1087LU-210
DS1087LU-216
DS1087LU-266
DS1087LU-466
DS1087LU-yxx
FREQUENCY (MHz)
2.0480
2.0480
10.0
16.6
66.6
66.6
Fixed up to 66.6
SPREAD (%)
2
4
2
2
2
4
2 or 4
SPRD
V
CC
2
OUT
1
Pin Configuration
TOP VIEW
8
7
SCL
SDA
PDN
OE
DS1087L
3
6
5
GND
4
Custom frequencies and over 20 standard frequencies avail-
able, contact factory.
µSOP
(118 mils)
EconOscillator is a trademark of Dallas Semiconductor.
Typical Operating Circuits appear at end of data sheet.
______________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
3.3V Spread-Spectrum EconOscillator
DS1087L
ABSOLUTE MAXIMUM RATINGS
Voltage Range on V
CC
Relative to Ground ..........-0.5V to +6.0V
Voltage Range on SPRD,
PDN,
OE, SDA, SCL
Relative to Ground* ................................-0.5V to (V
CC
+ 0.5V)
Operating Temperature Range ...........................-40°C to +85°C
*This
voltage must not exceed 6.0V.
Programming Temperature Range .........................0°C to +70°C
Storage Temperature Range .............................-55°C to +125°C
Soldering Temperature ..................See IPC/JEDEC J-STD-020A
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Is there any expert who can give me some guidance on how to do this? There is too little information online and I am confused as a novice. I don't know where to start....
[size=9pt]Wireless monitoring based on wireless LAN [url=http://www.tpsee.com/catalog1/news_20070903.html][color=#000000]Wireless video monitoring[/color][/url] solutions based on WLAN are generally b...
If the only memory in my SOPC Builder is on-chip memory, then does Run As Hardware run in on-chip memory?
The only memory is sdram, so does run as hardware run in sdram?
If there is only flash or epcs...
I was asked to update the SDK version. I have never seen compiled stuff before, so I had to learn while doing. Now I encounter a problem: there is a regular expression like this in the new SDK: DEPS_S...
[align=left]RT, I want to borrow a Bluetooth serial port module to the development board. The RXD and TXD pins of the development board are not brought out, and there is only one RS232 serial port. Th...
Embedded System
京公网安备 11010802033920号
EEWORLD
