ACPL-570xL, ACPL-573xL, ACPL-177xL,
ACPL-675xL, 5962-08227
1
Hermetically Sealed 3.3V, Low I
F
, Wide V
CC
,
High Gain Optocouplers
Data Sheet
Description
These devices are single, dual, and quad channel, hermetically
sealed optocouplers. The products are capable of operation
and storage over the full military temperature range and can
be purchased as either commercial product or with full
MIL-PRF-38534 Class Level H or K testing or from DLA Standard
Microcircuit Drawing (SMD) 5962-08227. All devices are
manufactured and tested on a MIL-PRF-38534 certified line and
Class H and K devices are included in the DLA Qualified
Products Database Supplemental Information Sheets
QML-38534 as Hybrid Microcircuits.
Each channel contains a GaAsP light emitting diode that is
optically coupled to an integrated high gain photon detector.
The high gain output stage features an open collector output,
providing both lower saturation voltage and higher signaling
speed than possible with conventional photo-Darlington
optocouplers.
The supply voltage can be operated as low as 3.0V without
adversely affecting the parametric performance.
These devices have a 300% minimum CTR at an input current
of only 0.5 mA, making them ideal for use in low input current
applications such as MOS, CMOS, low power logic interfaces, or
line receivers.
Features
Low power consumption
3.3V supply voltages
Dual marked with device part number and DLA Standard
Microcircuit Drawing (SMD)
Manufactured and tested on a MIL-PRF-38534 Certified
Line
QML-38534, Class H and K
Three hermetically sealed package configurations
Performance guaranteed over full military temperature
range: –55°C to +125°C
Low input current requirement: 0.5 mA
High current transfer ratio: 1500% typical at I
F
= 0.5 mA
Low output saturation voltage: 0.11V typical
1500 Vdc withstand test voltage
HCPL-4701/31, -070A/31 function compatibility
Applications
CAUTION
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation which may be induced by ESD.
1.
See
Selection Guide — Package Styles and Lead Configuration Options
for available extensions.
Military and aerospace
High reliability systems
Telephone ring detection
Microprocessor system interface
Transportation, medical, and life critical systems
Isolated input line receiver
EIA RS-232-C line receiver
Voltage level shifting
Isolated input line receiver
Isolated output line driver
Logic ground isolation
Harsh industrial environments
Current loop receiver
System test equipment isolation
Process control input/output isolation
Broadcom
-1-
ACPL-570xL, ACPL-573xL, ACPL-177xL, ACPL-675xL, 5962-08227
Data Sheet
Package styles for these parts are 8- and 16-pin DIP through
hole (case outlines P and E respectively), and 16-pin surface
mount DIP flat pack (case outline F). Devices can be purchased
with a variety of lead bend and plating options. See the
Selection Guide — Package Styles and Lead Configuration
Options
table for details. Standard Military Drawing (SMD)
parts are available for some package and lead styles.
Because the same electrical die (emitters and detectors) are
used for each channel of each device listed in this data sheet,
absolute maximum ratings, recommended operating
conditions, electrical specifications, and performance
characteristics shown in the figures are similar for all parts
except as noted. Additionally, the same package assembly
processes and materials are used in all devices. These
similarities justify the use of a common data base for die
related reliability.
Functional Diagram
1
2
3
4
8
7
6
5
Truth Table
(Positive Logic)
Input
On (H)
Off (L)
Output
L
H
NOTE
The connection of a 0.1-μF bypass capacitor
between V
CC
and GND is recommended.
Selection Guide — Package Styles and Lead Configuration Options
Package
Lead Style
Channels
Common Channel Wiring
Withstand Test Voltage
Part Number and Options
Commercial
MIL-PRF-38534, Class H
MIL-PRF-38534, Class K
Standard Lead Finish
a
Solder Dipped
b
Butt Cut/Gold Plate
a
Gull Wing/Soldered
b
Class H SMD Part Number
Prescript for all below
Gold Plate
a
Solder Dipped
b
Butt Cut/Gold Plate
a
Butt Cut/Soldered
b
Gull Wing/Soldered
b
5962-
0822703HEC
0822703HEA
0822703HUC
0822703HUA
0822703HTA
5962-
0822701HPC
0822701HPA
0822701HYC
0822701HYA
0822701HXA
5962-
0822702HPC
0822702HPA
0822702HYC
0822702HYA
0822702HXA
ACPL-1770L
ACPL-1772L
ACPL-177KL
Gold Plate
Option -200
Option -100
Option -300
ACPL-5700L
ACPL-5701L
ACPL-570KL
Gold Plate
Option -200
Option -100
Option -300
ACPL-5730L
ACPL-5731L
ACPL-573KL
Gold Plate
Option -200
Option -100
Option -300
ACPL-6750L
ACPL-6751L
ACPL-675KL
Gold Plate
16-Pin DIP
Through Hole
4
V
CC
, GND
1500 Vdc
8-Pin DIP
Through Hole
1
None
1500 Vdc
8-Pin DIP
Through Hole
2
V
CC
, GND
1500 Vdc
16-Pin Flat Pack
Unformed leads
4
V
CC
, GND
1500 Vdc
Broadcom
-2-
ACPL-570xL, ACPL-573xL, ACPL-177xL, ACPL-675xL, 5962-08227
Data Sheet
Hermetic Optocoupler Options
Option
100
Description
Surface-mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on Commercial,
Class H and Class K product in 8-pin and 16-pin DIP.
4.32 (0.170)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
4.32 (0.170)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
0.20 (0.008)
0.33 (0.013)
7.36 (0.290)
7.87 (0.310)
200
300
Lead finish is solder dipped rather than gold plated. This option is available on Commercial, Class H and Class K product in 8-pin
and 16-pin DIP. DLA Drawing (SMD) part numbers contain provisions for lead finish.
Surface-mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on
Commercial, Class H and Class K product in 8-pin and 16-pin DIP. This option has solder-dipped leads.
4.57 (0.180)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
4.57 (0.180)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
0.20 (0.008)
0.33 (0.013)
9.65 (0.380)
9.91 (0.390)
4.57 (0.180)
MAX.
5° MAX.
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
1.07 (0.042)
1.32 (0.052)
Broadcom
-5-