GENERAL ................................................................................................................................................. 3
Material .............................................................................................................................................. 6
5.2.1.
Metallic Parts .................................................................................................................................. 6
5.2.2.
Plastic Parts ................................................................................................................................... 6
At 9:30, the courier knocked on the door. I lay in bed and thought that the development board must have been delivered:loveliness: I opened the door and saw that it was indeed:loveliness: I opened it ...
First of all, I would like to thank eeworld for giving me this platform to show my experience of learning 51. At the same time, I would like to send a belated blessing to all forum friends: Happy Nati...
My board is 2812. The Mcbsp samples the data of 6 channels through ad73360. The sampled data is stored in the external RAM1.Now the channel jump occurs. This phenomenon has not been eliminated. Someti...
[p=null, 2, left][font=微软雅黑,][size=4][color=#ffffff]To ensure high-frequency input and output, each integrated circuit (IC) must use capacitors to connect each power pin to the ground on the device fo...
Hello everyone: Recently, I got the above error message when using PB5.0. PB5.0 was installed before, and I recently installed Visual Studio 2005. When I used PB5 to create the system today, after Sys...
I created a single document project under WinCE, added the EraseBkgnd message response in CMainFrame, set a breakpoint and found that the program did not enter the response. Later, I created another s...
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
As a simple and practical input device, buttons have been used in various microcontroller application systems and are ubiquitous. However, the buttons used in different practical occasions are also...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
0 Introduction
High-precision current source can provide high-precision current supply for precision instruments, and is suitable for automatic measurement tasks of various resistors in semico...[Details]
This article will introduce a design method for a distributed control system used in a tracking car, which can perform distributed control of motor modules, sensor modules, and lighting control mod...[Details]
Traditional
virtual instruments
consist of a data acquisition
board
based on PCI bus and
corresponding software. However, with
the rapid development of
computer
network techno...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]
a. Keep the battery clean, wipe off the spilled electrolyte, contaminated dirt and dust in time; keep the poles and terminal clamps clean and in good contact, and apply vaseline or butter to preven...[Details]
The power supply is the core component of a computer. Although it is not of high value, all computer components rely on the switching power adapter to provide energy, so the stability of a power su...[Details]
Direct digital frequency synthesis (DDS) has fast frequency switching and modulation capabilities and is widely used. However, when low power consumption and low cost are the main considerations, D...[Details]
Energy conservation and environmental protection are the main directions of current automotive technology research, and power batteries are the key to electric vehicle technology. Research on powe...[Details]