It is packaged in a 4-pin DIP, available in SMT gullw-
ing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V
(*),
CTR is 50% to
600% at input current of
±0.5mA
and CMR is MIN.
10kV/µs.
■
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No.
PC8141)
2. Package resin : UL flammability grade (94V-0)
■
Applications
1. Programmable controllers
2. Facsimiles
3. Telephones
■
Features
1. 4-pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. AC input type
4. Low input current type (I
F
=±0.5mA)
5. High collector-emitter voltage (V
CEO
: 80V
(*)
)
6. High noise immunity due to high common rejection
voltage (CMR : MIN. 10kV/µs)
7. High isolation voltage between input and output
(V
iso(rms)
: 5.0 kV)
(*)Up to Date code "P8"(August 2002)V
CEO
:70V.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
I usually design I2C with MCU as the master device. Now I want to design Atting13 as a slave device. I always fail to design it according to the I2C protocol. Is there anyone in the forum who has succ...
Ideas:1. Edit and process the effect data through the host computer software and save it in the SD card;2. Read the data information in the SD card into RAM through SSP0;3. According to the structure ...
How can I find out which filter the current message comes from in the CAN interrupt program? The information says it is the FMI parameter in the structure, but when I was experimenting, the query fmi ...
I have used VCA822 to make an automatic gain control recently. However, pins 1 and 14 of VCA822 both show +VCC, and pins 7 and 8 both show -VCC. I want to know, is it OK to connect only one +VCC and o...