IN
D
-Q
QS series
Snap-in panel mount LED indicators
DISTINCTIVE FEATURES
6 mm, 8 mm, 10 mm and 12 mm Ø cut-out sizes
Front panel snap-in mounting requires no additional hardware
Standard intensity diffused LED or high brightness LED
for daylight viewing
GENERAL SPECIFICATIONS
• Operating Temperature Range: -30 °C to +65 °C ( –22 °F to +149 °F)
• Max Reverse Voltage: 5 V
• Life Expectancy: 100,000 hours
• Max Panel Thickness: 11 mm
MATERIALS
• Moulded polycarbonate
MOUNTING
QS6 SERIES PANEL CUT-OUT
QS10 SERIES PANEL CUT-OUT
QS8 SERIES PANEL CUT-OUT
QS12 SERIES PANEL CUT-OUT
The company reserves the right to change specifications without notice.
LED characteristics are dependent upon environmental conditions. Therefore published data
should be considered nominal and subject to variations.
1
LED INDICATORS
07
7-
1
S-
LED INDICATORS
QS series
Snap-in panel mount LED indicators
ELECTRICAL SPECIFICATIONS
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
6 mm
Intensity
HE Red
Green
Yellow
Blue
White (clear)
Bi-color (Typical)
(Red/Green)
Tri-color (Typical)
(Red/Green/Yellow)
40 mcd
40 mcd
30 mcd
1,200 mcd
1,200 mcd
60 mcd
-
8, 10 & 12 mm
Intensity
100 mcd
60 mcd
50 mcd
1,600 mcd
1,600 mcd
45 mcd
60/15/13mcd
Forward Voltage
2.0 V
2.2 V
2.1 V
3.8 V
3.8 V
2.0 V
2.5 V
Voltage
Operating Voltage
(Min to Max)
Operating Current
(Typical All Types)
05 (No Resistor)
6 VDC
12 VDC
24 VDC
28 VDC
110 VAC
(not available
on QS6)
220 VAC
(not available
on QS6)
2.1 to 3.3 VDC
5.4 to 6.6 VDC
10.8 to 13.2 VDC
21.6 to 26.4 VDC
25.2 to 30.8 VDC
99 to 110 VAC
20 mA max
20 mA
20 mA
20 mA
20 mA
6 mA
207 to 253 VAC
3 mA
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
* Customer to supply resistor for desired operating
current.
HIGH BRIGHTNESS LED INTENSITY
LED COMPONENT SPECIFICATIONS
6 mm
Intensity
HE Red
Green
Yellow
Orange
3,700 mcd
2,000 mcd
1,200 mcd
4,500 mcd
8, 10 & 12 mm
Intensity
6,000 mcd
1,900 mcd
2,100 mcd
4,500 mcd
Forward Voltage
2.2 V
3.2 V
2.0 V
2.2 V
• The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
• Luminous intensities and color shades of white LEDs may
vary within a batch.
• Luminous intensity will be reduced with lower operating
current.
2
QS series
Snap-in panel mount LED indicators
BUILD YOUR PART NUMBER
QS
SERIES
MOUNTING HOLE
TERMINALS
TYPE OF ILLUMINATION
LED COLOR
VOLTAGE
6
8
10
12
Ø6 mm
Ø8 mm
Ø10 mm
Ø12 mm
1
3
Solder lug/faston
Wires
XX
YY
ZZ
KK
Fixed Light
Bi-color
Tri-color
(10 mm only)
Flashing light
(12 - 28 VDC)
R
G
Y
B
W
O
HR
HG
HY
HO
RG
RYG
Red
Green
Yellow
Blue
White (clear)
Orange
Hyper Bright
Red
Hyper Bright Green
Hyper Bright Yellow
Hyper Bright Orange
Red/Green
Red/Yellow/Green
(10 mm Only)
02
06
12
24
28
110
220
No resistor*
6 VDC
12 VDC
24 VDC
28 VDC
110 VAC
220 VAC
* please refer to the
forward voltage in
electrical specifications
ABOUT THIS SERIES
Notice:
please note that not all combinations of above numbers are available.
• Gold solder lug/Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, QS6 & QS8 24 AWG UL1061, QS10 & QS12 22 AWG UL1061, red wire denotes Anode (+), black wire
denotes Cathode (-) for other wire lengths consult APEM
• For LEDs with alternate voltages and multi-voltage options consult APEM.
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced.
Bi-color are available up to 28 VDC.
• Take care when soldering (recommended solder temperature 270 °C - 2 sec).
• The Tri-color LED has red and green LEDs when both are connected yellow is produced.
• We recommend using high brightness LEDs for use at 220 VAC
3
LED INDICATORS
LED INDICATORS
QS series
Snap-in panel mount LED indicators
Ø 6 MM - SOLDER LUG TERMINALS
Ø 6 MM - WIRES TERMINALS
Ø 8 MM - SOLDER LUG / FASTON TERMINALS
Ø 8 MM - WIRES TERMINALS
4
QS series
Snap-in panel mount LED indicators
Ø 10 MM - SOLDER LUG / FASTON TERMINALS
Ø 10 MM - WIRES TERMINALS
Ø 12 MM - SOLDER LUG / FASTON TERMINALS
Ø 12 MM - WIRES TERMINALS
5
LED INDICATORS
京公网安备 11010802033920号
EEWORLD
