5962-8954101CA datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Analog mixed-signal IC> Amplifier circuit> 5962-8954101CA

Preview

5962-8954101CA: Description5962-8954101CA amplifier basic information: 5962-8954101CA is a SAMPLE AND HOLD CIRCUIT. Commonly used packaging methods are CERAMIC, DIP-14 5962-8954101CA amplifier core information: The minimum operating temperature of the 5962-8954101CA is -55 °C and the maximum operating temperature is 125 °C. The nominal supply voltage of 5962-8954101CA is 15 V, and its corresponding nominal negative supply voltage is -15 V. Related dimensions of 5962-8954101CA: 5962-8954101CA has 14 terminals. Its terminal position type is: DUAL. 5962-8954101CA amplifier additional information: Its temperature grade is: MILITARY. The corresponding JESD-30 code is: R-GDIP-T14. The corresponding JESD-609 code is: e0. The packaging code of 5962-8954101CA is: DIP. The packaging materials of 5962-8954101CA are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR. The 5962-8954101CA package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.; CategoryAnalog mixed-signal IC Amplifier circuit; File Size40KB，11 Pages; ManufacturerPrecision Monolithics Inc; Alternative parts：5962-8954101CA

Download Datasheet Parametric Compare View All

5962-8954101CA Overview

5962-8954101CA amplifier basic information:

5962-8954101CA is a SAMPLE AND HOLD CIRCUIT. Commonly used packaging methods are CERAMIC, DIP-14

5962-8954101CA amplifier core information:

The minimum operating temperature of the 5962-8954101CA is -55 °C and the maximum operating temperature is 125 °C.

The nominal supply voltage of 5962-8954101CA is 15 V, and its corresponding nominal negative supply voltage is -15 V.

Related dimensions of 5962-8954101CA:

5962-8954101CA has 14 terminals. Its terminal position type is: DUAL.

5962-8954101CA amplifier additional information:

Its temperature grade is: MILITARY. The corresponding JESD-30 code is: R-GDIP-T14. The corresponding JESD-609 code is: e0. The packaging code of 5962-8954101CA is: DIP. The packaging materials of 5962-8954101CA are mostly CERAMIC and GLASS-SEALED.

The package shape is RECTANGULAR. The 5962-8954101CA package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.

5962-8954101CA Parametric

Parameter Name	Attribute value
Maker	Precision Monolithics Inc
package instruction	CERAMIC, DIP-14
Reach Compliance Code	unknown
Amplifier type	SAMPLE AND HOLD CIRCUIT
Maximum analog input voltage	10 V
Minimum analog input voltage	5 V
maximum rate of descent	4 V/s
JESD-30 code	R-GDIP-T14
JESD-609 code	e0
Negative supply voltage upper limit	-18 V
Nominal Negative Supply Voltage (Vsup)	-15 V
Number of functions	1
Number of terminals	14
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, GLASS-SEALED
encapsulated code	DIP
Package shape	RECTANGULAR
Package form	IN-LINE
Certification status	Not Qualified
Sample and hold/Track and hold	SAMPLE
Filter level	MIL-STD-883
Supply voltage upper limit	18 V
Nominal supply voltage (Vsup)	15 V
surface mount	NO
Temperature level	MILITARY
Terminal surface	TIN LEAD
Terminal form	THROUGH-HOLE
Terminal location	DUAL
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Drawing updated to reflect current requirements. - ro

DATE (YR-MO-DA)

01-05-15

APPROVED

R. MONNIN

THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

RICK OFFICER

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

CHECKED BY

CHARLES E. BESORE

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216

http://www.dscc.dla.mil

APPROVED BY

MICHAEL A. FRYE

MICROCIRCUIT, LINEAR, LOW-DROOP-RATE,

ACCURATE SAMPLE AND HOLD AMPLIFIER,

MONOLITHIC SILICON

DRAWING APPROVAL DATE

89-08-15

AMSC N/A

REVISION LEVEL

SIZE

SHEET

CAGE CODE

67268

1 OF

5962-89541

DSCC FORM 2233

APR 97

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

5962-E419-01

1.4 Recommended operating conditions.

Positive supply voltage range (+V

) ...................................... +15 V dc

Negative supply voltage range (-V

) ...................................... –15 V dc

Hold capacitor (C

) ................................................................ 0.005

µF

Logic control (V

) ................................................................. Connected to ground, or 3.5 V below positive supply

and 2.0 V above negative supply

Ambient operating temperature range (T

) ............................ -55°C to +125°C

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a

part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed

in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in

the solicitation.

SPECIFICATION

DEPARTMENT OF DEFENSE

MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.

STANDARDS

DEPARTMENT OF DEFENSE

MIL-STD-883 -

MIL-STD-1835 -

HANDBOOKS

DEPARTMENT OF DEFENSE

MIL-HDBK-103 -

MIL-HDBK-780 -

List of Standard Microcircuit Drawings.

Standard Microcircuit Drawings.

Test Method Standard Microcircuits.

Interface Standard Electronic Component Case Outlines.

(Unless otherwise indicated, copies of the specification, standards, and handbooks are available from the Standardization

Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-

JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer

Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-

PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying

activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan

may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.

These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-

PRF-38535 is required to identify when the QML flow option is used.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-89541

SHEET

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as

specified in MIL-PRF-38535, appendix A and herein.

3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.2 herein.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full ambient operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are described in table I.

3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN

listed in 1.2 herein. In addition, the manufacturer's PIN may also be marked as listed in MIL-HDBK-103 (see 6.6 herein). For

packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the

option of not marking the "5962-" on the device.

3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance

to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in

accordance with MIL-PRF-38535 to identify when the QML flow option is used.

3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an

approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to

listing as an approved source of supply shall affirm that the manufacturer's product meets the requirements of MIL-PRF-

38535, appendix A and the requirements herein.

3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided

with each lot of microcircuits delivered to this drawing.

3.8 Notification of change. Notification of change to DSCC-VA shall be required in accordance with MIL-PRF-38535,

appendix A.

3.9 Verification and review. DSCC, DSCC's agent, and the acquiring activity retain the option to review the manufacturer's

facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the

reviewer.

4. QUALITY ASSURANCE PROVISIONS

4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535,

appendix A.

4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices

prior to quality conformance inspection. The following additional criteria shall apply:

Burn-in test, method 1015 of MIL-STD-883.

(1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision

level control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall

specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in

test method 1015 of MIL-STD-883.

(2) T

= +125°C, minimum.

Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter

tests prior to burn-in are optional at the discretion of the manufacturer.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

DSCC FORM 2234

APR 97

SIZE

REVISION LEVEL

5962-89541

SHEET

5962-8954101CA Related Products

	5962-8954101CA	5962-89541022A	5962-8954101CX	5962-8954101CB	5962-89541022C	PCF1206R-2K74WA	5962-8954102CX	5962-8954102CA	5962-8954102CB
Description	Sample and Hold Circuit, 1 Func, Sample, CDIP14, CERAMIC, DIP-14	Sample and Hold Circuit, 1 Func, Sample, CQCC20, CERAMIC, QCC-20	Sample and Hold Circuit, 1 Func, Sample, CDIP14, CERAMIC, DIP-14	Sample and Hold Circuit, 1 Func, Sample, CDIP14, CERAMIC, DIP-14	Sample and Hold Circuit, 1 Func, Sample, CQCC20, CERAMIC, LCC-20	Fixed Resistor, Thin Film, 0.125W, 2740ohm, 150V, 0.05% +/-Tol, 25ppm/Cel, Surface Mount, 1206, CHIP	Sample and Hold Circuit, 1 Func, Sample, CDIP14, CERAMIC, DIP-14	Sample and Hold Circuit, 1 Func, Sample, CDIP14, CERAMIC, DIP-14	Sample and Hold Circuit, 1 Func, Sample, CDIP14, CERAMIC, DIP-14
package instruction	CERAMIC, DIP-14	CERAMIC, QCC-20	CERAMIC, DIP-14	CERAMIC, DIP-14	CERAMIC, LCC-20	CHIP	CERAMIC, DIP-14	CERAMIC, DIP-14	CERAMIC, DIP-14
Reach Compliance Code	unknown	unknown	unknown	unknown	unknown	compliant	unknown	unknown	unknown
Number of terminals	14	20	14	14	20	2	14	14	14
Maximum operating temperature	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C	125 °C
Minimum operating temperature	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C	-55 °C
Package form	IN-LINE	CHIP CARRIER	IN-LINE	IN-LINE	CHIP CARRIER	SMT	IN-LINE	IN-LINE	IN-LINE
surface mount	NO	YES	NO	NO	YES	YES	NO	NO	NO
Maker	Precision Monolithics Inc	Precision Monolithics Inc	Precision Monolithics Inc	Precision Monolithics Inc	Precision Monolithics Inc	-	-	Precision Monolithics Inc	Precision Monolithics Inc
Amplifier type	SAMPLE AND HOLD CIRCUIT	SAMPLE AND HOLD CIRCUIT	SAMPLE AND HOLD CIRCUIT	SAMPLE AND HOLD CIRCUIT	SAMPLE AND HOLD CIRCUIT	-	SAMPLE AND HOLD CIRCUIT	SAMPLE AND HOLD CIRCUIT	SAMPLE AND HOLD CIRCUIT
Maximum analog input voltage	10 V	10 V	10 V	10 V	10 V	-	10 V	10 V	10 V
Minimum analog input voltage	5 V	10 V	5 V	5 V	5 V	-	10 V	10 V	10 V
maximum rate of descent	4 V/s	2 V/s	4 V/s	4 V/s	5 V/s	-	2 V/s	2 V/s	2 V/s
JESD-30 code	R-GDIP-T14	R-CQCC-N20	R-GDIP-T14	R-GDIP-T14	S-CQCC-N20	-	R-GDIP-T14	R-GDIP-T14	R-GDIP-T14
JESD-609 code	e0	e0	-	e0	e0	e3	-	e0	e0
Negative supply voltage upper limit	-18 V	-18 V	-18 V	-18 V	-18 V	-	-18 V	-18 V	-18 V
Nominal Negative Supply Voltage (Vsup)	-15 V	-15 V	-15 V	-15 V	-15 V	-	-15 V	-15 V	-15 V
Number of functions	1	1	1	1	1	-	1	1	1
Package body material	CERAMIC, GLASS-SEALED	CERAMIC, METAL-SEALED COFIRED	CERAMIC, GLASS-SEALED	CERAMIC, GLASS-SEALED	CERAMIC, METAL-SEALED COFIRED	-	CERAMIC, GLASS-SEALED	CERAMIC, GLASS-SEALED	CERAMIC, GLASS-SEALED
encapsulated code	DIP	QCCN	DIP	DIP	QCCN	-	DIP	DIP	DIP
Package shape	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	SQUARE	-	RECTANGULAR	RECTANGULAR	RECTANGULAR
Certification status	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	-	Not Qualified	Not Qualified	Not Qualified
Sample and hold/Track and hold	SAMPLE	SAMPLE	SAMPLE	SAMPLE	SAMPLE	-	SAMPLE	SAMPLE	SAMPLE
Filter level	MIL-STD-883	-	MIL-STD-883	MIL-STD-883	MIL-STD-883	-	-	-	MIL-PRF-38535
Supply voltage upper limit	18 V	18 V	18 V	18 V	18 V	-	18 V	18 V	18 V
Nominal supply voltage (Vsup)	15 V	15 V	15 V	15 V	15 V	-	15 V	15 V	15 V
Temperature level	MILITARY	MILITARY	MILITARY	MILITARY	MILITARY	-	MILITARY	MILITARY	MILITARY
Terminal surface	TIN LEAD	TIN LEAD	-	TIN LEAD	TIN LEAD	Matte Tin (Sn) - with Nickel (Ni) barrier	-	TIN LEAD	TIN LEAD
Terminal form	THROUGH-HOLE	NO LEAD	THROUGH-HOLE	THROUGH-HOLE	NO LEAD	-	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE
Terminal location	DUAL	QUAD	DUAL	DUAL	QUAD	-	DUAL	DUAL	DUAL
Base Number Matches	1	1	1	1	1	-	1	1	-

Recommended Resources

CdS photoresistor as electronic photometric element circuit diagram

HT-6010/6012/6013/6014/6015 circuit-b

Interlock control circuit of drilling machine spindle motor and hydraulic motor

BCD code AC voltage regulating circuit

Voltage controlled oscillator using CMOS integrated circuit

Resistor bridge amplifier circuit

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components